Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Adjusting the low beam headlight
its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much
Posted on Jan 31, 2009
SOURCE: Hyundai Tucson
The transmission filter is inside the transmission. You have to drain out the oil and remove the transmission pan and gasket. The filter is made of metal guaze and is screwed/bolted to the underneath of the valve body.
Posted on Apr 09, 2009
You change it like you'd change any headlamp bulb. There is an access cap behind the headlamp assembly -- remove it, then remove the connector to the bulb, then remove the retaining clip/spring holding the bulb in place. Then install/insert the new bulb in the same 'ORIENTATION' as the old one. Reinstall in reverse order... ALAKAZAM!... .done!
Posted on Jun 25, 2009
SOURCE: headlight aiming
on each headlamp assembly, there will be either one or two plastic nuts that you can turn.
If you only have one nut on each, that will adjust the vertical aim of the headlights.
If you have two nuts on each, one will adjust the vertical and the other will adjust the horizontal.
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 14, 2009
as far as i know you can't remove them ..it sounds like you need new ones if under warranty they should be free ..i had condensation in mine and they were replaced free
Posted on Dec 05, 2010
Tips for a great answer:
Nov 29, 2015 | 2005 Hyundai Tucson
Feb 11, 2015 | 2005 Hyundai Tucson
Jul 16, 2014 | 2006 Hyundai Tucson
Jan 11, 2013 | 2009 Hyundai Tucson
Aug 27, 2010 | 2005 Hyundai Tucson
Jul 06, 2010 | 2005 Hyundai Tucson
May 20, 2010 | Cars & Trucks
Nov 28, 2009 | 2005 Hyundai Tucson
Dec 17, 2008 | 2006 Hyundai Tucson
104 people viewed this question
Usually answered in minutes!