Question about Cars & Trucks
I am trying to remove the wiper arm to get under the gril and fix a problem. The arm is very hard, it will not move. What am I doing wrong/
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
are you try to remove the tapered end that connected to the steering linkage ? if you are you will need a pickle fork, some part stores will rent this tool to you good luck kdc744
Posted on Dec 24, 2008
there is a keeper on the inside of the arm. its easier to get to if you remove the whole arm. lift the wiper arm and near the pivot point there is a little flat bar that sticks out along the arm itself. its about a quarter inch long. pull that out alittle and slide the arm off the peg. makes it easier for me. if you cannot get the wiper off still, destroy it. your replacing it anyway and the arm is pretty sturdy.
Posted on Jun 20, 2009
Tips for a great answer:
Mar 04, 2015 | 2003 Chevrolet Cavalier
Oct 16, 2014 | 1995 Chevrolet Cavalier
Jan 15, 2011 | 2001 Chevrolet Blazer
Fig. 2: Mount the wiper blade/arm as shown-1994-96 Pick-ups
When installing the arms, the at-rest position of the blades should be determined before pushing the arm onto the pivot. For Dakota trucks, the tip of the driver's side blade should be 0.51-2.63 in. (13-67mm) above the cowl panel and the passenger's side blade should be 0.94-3.06 in. (24-78mm) above the cowl panel. For 1989-93 Pick-ups and Ramchargers, the driver's side blade should be 1.84 in. (47mm) above the windshield weatherstripping at the heel of the blade; the passenger's side blade should be 2.24 in. (57mm) above the weatherstripping. For 1994-96 Pick-ups, the wiper motor must be in the PARK position and the wiper blade should be about 0.85 in. (22mm) from the upper edge of the black-out areas at the base of the windshield.
Hope this helps to solve it.
Nov 26, 2010 | 1992 Dodge Ram 250
May 18, 2010 | 1988 Toyota Pickup
May 03, 2010 | 1987 Chevrolet S-10 Pickup
Apr 07, 2010 | 1987 Chevrolet S-10 Pickup
Sep 09, 2009 | 1989 Chevrolet Corvette
Jun 03, 2009 | 1989 Chevrolet K1500
Mar 25, 2009 | 2000 Plymouth Voyager
29 people viewed this question
Usually answered in minutes!