Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You need to replace the handle itself. The inside of the handle where the metal cable fitting attaches causes too much strain on the plastic and the molded groove breaks. Ford has the same problem. I don't know why these car man. dont just go back to all metal exterior handles. If you have time you can probably fix it with epoxy and washers, but the fastest way is to get one aftermarket or from a junkyard. Hope this answers your question.
Please remember to rate this fix.
Posted on Feb 14, 2009
Start with fuel system. Listen for fuel pump humm at fuel tank No humm check wiring to pump for power. Then check for spark at plugs and wires. Remove wire from coil and hold near engine and see arch when you crank. No arch. Replace ignition Modular inside distributor cap or cap or rotor
Posted on Feb 04, 2010
DRIVE BELT DECAL SHOULD BE UNDER THE HOOD.OR YOU CAN GO TO DEALERSHIP GET ONE AUTO ZONE OR ADVANCE AUTO PARTS CAN GET YOU ONE.OR YOU CAN BUY A HAYNES REPAIR MANUAL IT HAS BELT DIAGRAM.
Posted on Mar 10, 2010
Tips for a great answer:
Oct 04, 2012 | 2006 Chevrolet Express
Jan 06, 2011 | 2000 Chevrolet Express Cargo
Jul 10, 2010 | Cars & Trucks
Apr 07, 2010 | 2001 Chevrolet Express
Jan 29, 2010 | 2000 Chevrolet Express Cargo
Oct 27, 2009 | 2004 Chevrolet Express
Aug 17, 2009 | 2000 Chevrolet Express Cargo
Oct 30, 2008 | 2000 Chevrolet Express Cargo
19 people viewed this question
Usually answered in minutes!