Question about 2009 Toyota Highlander V6

Open Question

How to reset warning lights on toyota highlander 2009

How to reset waring lights

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
justuscc
  • 360 Answers

SOURCE: reset oil maintenance light in

  1. Set the "ENGINE START STOP" or engine switch OFF with the trip meter A reading shown.
  2. While pressing the trip meter reset button, set the "ENGINE START STOP" switch or engine switch ON.
Without multi-information display

  1. Continue to press and hold the button until the trip meter displays 000000.
With multi-information display

  1. Continue to press and hold the button until "COMPLETE" appears on the multi-information display.
there you go jimmy mark as fixya

Posted on Sep 26, 2008

Ad
Murphybanton
  • 2004 Answers

SOURCE: Computer warning Oil maintenance 2008 Highlander Hybrid

Please email me on onifadeadewunmi@hotmail.com and I will email you the procedure in printed matter.

Cheers

Posted on Apr 14, 2009

  • 7353 Answers

SOURCE: How do I turn off tire pressure sensor warnning

set the tire pressure to the door decal, check all the tires, including the spare.

Posted on Oct 15, 2009

techbuster
  • 5081 Answers

SOURCE: How do I reset the maintenance warning light on

To disable this light without unplugging the battery:

1. Start the car.
2. Place odometer on Trip A
3. Turn car off
4. Place your finger and hold the odometer trip button
5. Turn key to the "on" position while holding the trip button; not "acc"
6. Wait until the computer reset finishes
7. The maint reqd light will turn off


Posted on Dec 07, 2009

satitus
  • 273 Answers

SOURCE: 2003 Toyota Highlander clock resets when I turn off the ignition

Have you checked any fuses? Does the climate control light up? If not then in the under hood fuse box (left of drivers side) check the ECU-B fuse should be 7.5 amp. Check the heater fuse in the fuse box inside the car it should be 15 amp. If the fuses are OK and only the clock is bad check out my site www.autoclockrepair.com I offer a repair service.

Posted on Jul 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn light will not turn off, not blinking, When turn on signal or 4 way flashers goes off for a few seconds then comes back on


2006-2015 Toyota Highlander MAINT REQD Light Reset

seventrumpet.com/2006-2015-toyota-highlander-maint-reqd-light-reset/
Mar 15, 2015 - How to MAINT REQD Light Reset on Toyota Highlander 2006, 2007, ...Turn the ignition switch to the "On" position, but do not start the engine ... This procedure should applies to the second and third generation of the Toyota Highlander (2005, 2006, 2007, 2008, ... Your email address will not be published.

Oct 12, 2015 | 2005 Toyota Highlander

1 Answer

Why master warning light is on on my 2009 toyota highlander?


Have you checked the brake fluid?

Master Tech Lee

Sep 03, 2014 | 2009 Toyota Highlander V6

1 Answer

How to reset 2011 toyota highlander low tire light


2011 Toyota Highlander. Had no luck finding the reset switch, HOWEVER, the warning indicator also includes the SPARE tire (there is a BT sensor in the valve stem which operators on a tiny battery which signals to the car as well). We had filled the 4 vehicle tires properly, and was still showing the tire pressure warning. Researched it and saw the SPARE is include with this monitoring system for the vehicle. Checked and filled the spare, the warning indicator turned off.

Jan 08, 2013 | 2011 Toyota Highlander

1 Answer

Warning Lights Toyota Highlander 2005


scan tool the brake light is a trouble code have it scanned some auto stores such as auto zone / advanced auto do it for free the code is a place to start they can also reset and clear the code

Nov 12, 2009 | Toyota Cars & Trucks

1 Answer

I had my rear brakes done on my 2005 Toyota Highlander by a mechanic not a delorship and I do no know how to reset the brake warning light.


Make sure fluid level is good. If ok tap on reservoir sometime air gets trapped or the float will stay stuck at bottom. See if that helps.

Nov 12, 2009 | 2005 Toyota Highlander

2 Answers

Maintenence required light and tire pressure lights will not go off after oil change and tire rotation on my Toyota Highlander. How do I turn them off?


The maintenance light needs to be reset manually. See my Tips and Tricks on this website for additional information on how to reset it.

You should also check your spare tire for proper inflation. It will set the tire pressure light, as the spare is monitored also. If all 5 tires are OK, you may have a malfunctioning tire pressure sensor. If the tires have been changed recently, people with older tire machines have been known to break the sensors regularly, by mistake.

Aug 10, 2009 | 2009 Toyota Highlander

2 Answers

Tire pressure light is on even though all tires are inflated prop


You can reset the TPMS system on your Toyota Highlander. There are instructions in the owner's manual on how to do so. However, resetting the system without checking the cold-air inflation of the tires is not necessarily solving the problem. The recommended tire pressure inflation sticker is located on the driver-side door frame. On the Highlander, it calls for 30 pounds per square inch (psi) of tire pressure per tire, including the full-sized spare. If the Highlander had a donut spare tire, it will not have a TPMS sensor and subsequently will not effect the TPMS system one way or the other. To reset the TPMS system in the Highlander, there is a reset button under the driver-side dashboard that needs to be held for a period of time (a few seconds) while the ignition key is in the "key-on/engine-off" mode. The TPMS warning light will blink rapidly for a few more seconds, and the system will reset itself. Refer to the manual for the exact procedure. If the TPMS warning light reoccurs, have the system or tires checked by a professional. Good luck and hope this helps, keep me posted. Be glad to help.

Jun 19, 2009 | 2004 Toyota Highlander

3 Answers

Vsc warning light and hybrid system fault warning light are on


Try estima hybrid repair manual http://en.estima.su/estima_hybrid_service_and_repair_manual.htm

Jun 07, 2009 | 2007 Toyota Highlander Hybrid

1 Answer

Computer warning Oil maintenance 2008 Highlander Hybrid


Please email me on onifadeadewunmi@hotmail.com and I will email you the procedure in printed matter.

Cheers

Apr 14, 2009 | 2008 Toyota Highlander

1 Answer

How to reset the tire pressure warning light on 2006 toyota highlander


There is a button under the steering column to reset the light.

Sep 03, 2008 | 2006 Toyota Highlander

Not finding what you are looking for?
2009 Toyota Highlander V6 Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...