Question about 1997 BMW Z3 Roadster

Open Question

1997 z3 radio works but no sound from speakers

My radio comes on but there is no sound coming from the speakers on my 1997 z3 bmw

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 117 Answers

SOURCE: Will the wheels from a BMW Z3 M fit a 1999 BMW Z3 2.8 ltr roadster?

yes they will you just may need to use a wheel spacer

Posted on Jul 01, 2008

  • 126 Answers

SOURCE: Thermostat location

you didn't mention what size engine you have, so i assumed its a 1.8L. thermostat is located at the housing just above the waterpump on the front of the engine. its #5 in the attached link http://www.realoem.com/bmw/showparts.do?model=CJ11&mospid=48077&btnr=11_1393&hg=11&fg=35

Posted on Jan 27, 2009

  • 208 Answers

SOURCE: BMW Z3 WRONG UNLOCK RADIO CODE HOW TO GET THE RIGHT ONE

If the radio is displaying code wait, or wait, then the ignition and radio must remain on for 1hour. I would contact a dealer within the USA and provide them with your radio serial number. The serial number can be displayed in the radio by pressing and holding down the "M" button while turning on the ignition.

Posted on Mar 15, 2009

  • 1 Answer

SOURCE: BMW Z3 WRONG UNLOCK RADIO CODE HOW TO GET THE RIGHT ONE

Go back to the dealer that told you the wrong number ! I have one and I am currently living in the Middle East but the car was brought from Europe... they have access and can track it down... Tell them that is the wrong code and not acceptable service...I asked to speak to a service mgr and they got it to me.. are you going to have your car serviced there ?? That's the point of paying for dealership service... so they can supply GOOD service and getting you the proper code counts...

Posted on Mar 18, 2009

  • 36 Answers

SOURCE: reset my bmw radio

there really is no proper way to reset the radio but just dissconnect the battery then re connect it and put in the code

Posted on Apr 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sometimes the clutch pedal does not return, or sticks down, on my 1997 BMW Z3


You have air in the clutch system. Check the fluid level in the reservoir . Check for oil leaks at the slave cylinder ( replace if there is oil ) Have the system bled . IF you have fluid and the air comes back then replace the clutch master cylinder as the air will be bypassing the piston cup from blockages in the ports.

Mar 01, 2014 | BMW Cars & Trucks

1 Answer

1997 BMW Z3 brake lights won't come on.


The brake lamp circuits on your 1997 BMW Z3 are pretty "old-school" and straight forward. Fuse #46 (15 Amp), located in the Front Power Distribution Box at the left rear side of the engine compartment supplies battery voltage to the brake light switch via the VIOLET/GREEN wire going into the switch. When the bake pedal is depressed, the voltage leaves the brake lamp switch on the BLUE/RED wire and supplies power to all of the brake lamp bulbs.

The brake lamp circuits do branch off and go to several control modules. This is ONLY for module INPUT to tell the module that the brakes are being applied. These modules include:
> Transmission Control Module
> Cruise Control Module
> ABS Control Module
> Slip Control Module

The ONLY way that any of these modules could be affecting the operation of your brake lamps is if there is an internal short to ground in the module that is causing the brake lamp fuse to blow.

If NONE of your brake lamps are working, the most likely causes are:
> Fuse #46 open (blown)
> Defective brake lamp switch
> Bad ground connection at ground G400 (Left side of luggage compartment)
> All 3 of your brake lamp bulbs burned out.

Yes, the BLUE/RED wire could be broken as well, but I would check all the other things listed above first.

Apr 24, 2012 | 1997 BMW Z3 Roadster

1 Answer

1997 z3 bmw radio lock vin#4uscj3324vlco7812


Getting the code to unlock the radio requires access to the factory data base, that is restricted and we do not have permission. You will need to contact the dealer for help with this. The original owner was given this code.

Feb 14, 2012 | 1996 BMW Z3 Roadster

1 Answer

I need a radio code bmw z3 1997


in this case you need ot contact the dealership and ask them since it is dependent on the VIN#. Also if you have ALL the information from when you purchased the car, the owners manual may have it written down in it somewhere, but it will not be printed, it will be hand written. Its a 4 digit number.

Apr 27, 2011 | 1999 BMW Z3

1 Answer

I had an aftermarket radio installed in a 1997 bmw z3. After installation, the key fob no longer locks or unlocks the doors. Any ideas for a fix.


everything keyless runs on frequencies if you removed the radio most likely it removed the keyless entry too especially in a beemer

Jan 14, 2011 | 2000 BMW Z3

1 Answer

I put a new radio in my 1997 bmw z3 roadster but now i cant get the alarm system to activate. Does the alarm system use somthing from the old radio?


it probably does. you will have to contact the dealer and see if they have any advice on what you can do to fix it.

Dec 15, 2009 | 1998 BMW Z3 Roadster

1 Answer

I have a 2001 BMW Z3. The battery went dead last


most new BMW's the fuse block is located behind the glove box. There should be a pair of twist plastic fastners at the back of the glove box, twist and remove the plate and you should find the fuse box and fuse locater list.

May 12, 2009 | 2001 BMW Z3

1 Answer

BMW Z3 WRONG UNLOCK RADIO CODE HOW TO GET THE RIGHT ONE


If the radio is displaying code wait, or wait, then the ignition and radio must remain on for 1hour. I would contact a dealer within the USA and provide them with your radio serial number. The serial number can be displayed in the radio by pressing and holding down the "M" button while turning on the ignition.

Mar 15, 2009 | 2001 BMW Z3

1 Answer

AIRBAG SENSOR MAT BMW 7 SER


Hey,
take a look at www.airbagmodul.com

They're working in Airbag-Simulators, Occupancy Sensor-Simulators and Seat Belt-Sensors.

Regards

Gerrit

Jul 05, 2008 | 1997 BMW Z3 Roadster

3 Answers

Warning lights on in my 97 Z3.


I have a replacement roof for my 1997 BMW Z3, could anyone give me advice how easy or hard its and could one man do it on his own?

May 17, 2008 | 1997 BMW Z3 Roadster

Not finding what you are looking for?
1997 BMW Z3 Roadster Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...