Question about Cars & Trucks

1 Answer

Headlight globes fortuner 2013

What healight and spotlight bulbs does a toyota fortuner 2013 model take?

Posted by Anonymous on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 0 Answers

New 2013 model fortuner plz some1 tell me the fog lamp and high beam size of the bulb

Posted on Sep 17, 2013


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: changing healights

I had to change my bulb on the same side of my 2001 sentra. I ended up taking the whole headlight out to get to the socket. It was a little more work with removing some of the front bumper parts, but well worth it to have a headlight! If you go this route, make sure to buy some new plugs to hold the bumper parts on - they are one-time use only. Take one in with you to make sure you get the right size, and you should be good to go.

Posted on Oct 01, 2008

  • 5158 Answers

SOURCE: how to change a headlight light bulb on toyota prius 2006?

they are usually changed from inside the engine compartment. you should be able to gain access to the bulb behind each headlight bazel. the socket often has to be turned to remove it. be careful not to touch the new bulb with your fingers as that will shorten it's lifespan. you may have to remove the battery if the burnt out bulb is on that side.


Please take a moment to rate this solution... thanks

Posted on Apr 15, 2009

  • 67 Answers

SOURCE: 1998 Ford windstar healights do not turn on


Posted on Apr 18, 2009

  • 672 Answers

SOURCE: 1999 Toyota Camry - Healight Assembly Removal

you need to remove the side light as there may be a screw holding the assembly down.

Posted on Aug 07, 2009

  • 1 Answer

SOURCE: headlight bulb toyota celica 92 model

h4 the 3 pin halogen ones

Posted on Apr 14, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replacing front headlight lens on 1985 Toyota Tercel

    How to change a Toyota Tercel headlight lamp - YouTube

    ? 4:06
    Apr 22, 2013 - Uploaded by NewEnglandgardening I replaced both headlight lamps on my 1996 Toyota Tercel. ...How To Install Replace Headlight and Bulb Toyota Corolla 98-02... Rear brake shoe replacement Toyota Tercel 1991-1998 Paseo Drum brakes Install Remove ...

Sep 27, 2015 | Toyota Cars & Trucks

4 Answers

Headlight changing

please use chelton manual for getting instructions with diagrams.

remove the side screws and then remove the rim of the light

now you can access the lights

Oct 17, 2008 | 1992 Toyota Celica

1 Answer

How to change a lamp in Toyota Corolla 2012?

The headlight globe usually just twists out of the back of the headlight assembly. When fitting the new globe,use a cloth or glove. Don't touch any part of the globe with bare hands as the oily film will cause the new globe to fail very quickly.

Dec 02, 2014 | 2012 Toyota Corolla L Sedan 1.8L 4-cyl....

1 Answer

My right headlight in my 06 hilux is only glowing. Tried new globe but still the same. Any ideas?

for a bulb to only glow indicates a massive resistance in the circuit that is dropping the available voltage. Check the wiring and connections to the bulb for loose ,corroded and check after the bulb for loose rusted, corroded earth points.Using a multimeter to read voltages to and from the bulb will indicate where the problem will be.

Nov 06, 2014 | 2006 Toyota Hilux 3.0

1 Answer

My car headlights are still work but I do not know why it does not have enough 12 volt

Do you mean the voltage is down below 12V? Your headlights may be dim because

- globes are failing, causing a dark film to form inside the glass. Replace them with good name brand globes

- corroded contacts in the globe mounting. Pull the contact housing off and on a few times to scrap the contacts

- low voltage at the contacts. Remove a contact housing, start the engine, turn on the lights, and measure the voltage available at the contacts. It should be 12V or at higher. If not, the battery charging circuit and alternator require inspection.

- poor grounding at the headlight. The bulb circuit may be grounded by a return wire or through the bulb mounting direct to the chassis. Measure the electrical resistance between the metal flange where the bulb sits and the metal chassis. It should be low, about 0.1 - 0.3 ohm

- tarnished headlight reflector, or clouded outer lens. Autozone and similar places sell kits which claim to allow restoration of these. Expect limited success I think

Oct 20, 2014 | 1999 Toyota Camry

1 Answer

How do i replace headlight globes on mr2 sw20?

Turn headlights to on. Then 2 clicks back to turns lighs off but keep headlights up/open.

Remove headlight shrouds, (Black plastics.) Use phillips + head screw driver.

Remove chrome trim ring using phillips head screw driver.

Pull out headlight bulb. Disconnect from harness.

Reverse to install.

Sep 12, 2014 | 1991 Toyota MR2

1 Answer

How to replace headlight bulb in 1987 toyota camra

For an 87 specifically, I don't know the answer, sorry. There were at least 3 designs used in the 93-94 models alone. If it is anything like them, you have to either

- press in the plastic barb clip on the centre of the wiring connector at the back of the globe housing, and pull down on the wiring connector to disconnect it. Then rotate the globe holder anticlockwise and withdraw it. Don't touch the new globe glass with your fingers, or if you have, clean it well with metho. Then installation is in reverse. Or for a different design,

- alternatively, unplug the electrical connector. Then turn the hard plastic cover, at the back of the headlight globe holder, anticlockwise and remove it. Then remove the rubber cover underneath. If you are replacing an outer bulb remove the bulb spring clip, first taking note of how it is fitted. On an inner globe there may be a covering socket over the globe itself. Remove that, and the spring clip underneath. Replace the globe. Installation is in reverse, making sure all bits are in position, and the 'lock' mark on the hard plastic cover is facing upwards.

Nov 16, 2011 | Toyota Camry Cars & Trucks

1 Answer

Can the factory headlight lens covers on a 2001 Mercury Cougar be removed and cleaned ? I can remove the entire healight assembly and change the bulbs, but the inside of the healight cover is dirty and...

The lincoln LS had the same problems, and the lens was held to the headlight assembly with a sticky glue.
To remove them, some guys were successful by warming the headlight assembly in the oven untill the glue softened up enough to be pulled apart.
Be careful if you try this, to much head and..oops I melted my headlight

Oct 13, 2010 | 2002 Mercury Cougar

2 Answers

2001 Mazda MPV headlights do not work at all. The running lights do.What could be the problem?

try replacing both headlight bulbs first. if that doesnt work then you have a wiring issue

Oct 12, 2009 | 2001 Mazda MPV

1 Answer

Headlight on drevers side needs replacing

their is a door on the back of the headlight housing that you remove to axcess the head light bulb. might have to remove battery first

Jun 12, 2009 | 2000 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides