Question about Cars & Trucks

Open Question

What causes error code 59 in 1nz engine - Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the code p0473 for a dodge sprinter van 2008


Error Code: P0404
Fault Location:
Exhaust Gas Recirculation (EGR) System - Range/Performance Problem
Causes:
-Hose leak/blockage.
-Wiring harness.
-Exhaust gas recirculation (EGR) valve/solenoid.
Error Code: P0473
Discription:
Exhaust Gas Pressure Sensor - High Input
Causes:
- Wiring short to positive.
- Exhaust gas pressure sensor (G450).
- Engine control module (ECM).
Error Code: P0674
Description:
Glow Plug Cylinder 4 Circuit - Circuit Malfunction
Causes:
-No Pre-Glow Period.
-Poor Cold Starting.
-Glow Plug Wiring faulty.
-Poor connection.
-Relay.
-Glow plug control module.
-Glow Plug faulty.
-Engine control module (ECM).
Solutions:
Check Glow Plug Wiring.
Check Glow Plug.
Error Code: P0675
Description:
Glow Plug Cylinder 5 Circuit - Circuit Malfunction
Causes:
-No Pre-Glow Period.
-Poor Cold Starting.
-Glow Plug Wiring faulty.
-Poor connection.
-Relay.
-Glow plug control module.
-Glow Plug faulty.
-Engine control module (ECM).
Solutions:
-Check Glow Plug Wiring.
-Check Glow Plug.

Sep 20, 2014 | 2008 Dodge Sprinter

1 Answer

Maserati p1015


Hello ! You found the cause of the error p1015 a Maserati? If so then please help because I had with Ukraine and there is no official Maserati service (

Apr 15, 2014 | 2009 Maserati GranTurismo

1 Answer

P1300


Error Code: P0301
Description:
Cylinder 1 - Misfire Detected
Possible Cause:
Wiring.
Ignition system.
Fuel injectors.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression.
Base engine problems.
Engine control module (ECM).

Error Code: P0302
Description:
Cylinder 2 - Misfire Detected
Possible Cause:
Wiring.
Ignition system.
Fuel injectors.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression.
Base engine problems.
Engine control module (ECM).

Error Code: P1300
Description: Random Misfire

Possible Cause:
As above.

Jan 22, 2014 | 1996 Honda Civic

1 Answer

How do I reset the computer system on a 2006 Ford Explorer


Are you asking how to reset the computer or how to clear an error code/check engine light? Clearing a check engine light (which will also clear the error code) can be done with a code scanner. These are usually available for use at little or no cost at any larger auto parts store (they may even connect the scanner for you and record/clear the code). One word of caution, however: if you clear the code but don't repair the cause, the code and light will return after a brief amount of time. Now as for resetting the computer itself, not recommended that you try since error codes are stored in non-volatile memory. Disconnecting the battery's positive terminal for an hour or so may clear the check engine light, but, again, it will reappear and regenerate the error code unless the cause is fixed. Good luck.

Sep 29, 2013 | 1998 Ford Explorer

1 Answer

I just got my car scanned and a few codes pop up


Error Code: P0130
Fault:
Oxygen Sensor (O2S) 1, Bank 1 - Circuit Malfunction
Possible Cause:
Malfunction Indicator Lamp (MIL) Triggered on first occurrence.
-Wiring harness.
-Oxygen sensor (O2S).
-Engine control module (ECM).

Error Code: P0505
Fault:
Idle Speed Control (ISC) System - Malfunction
Possible Cause:
-Wiring harness.
-Idle speed control (ISC) actuator/Idle air control valve (IAC) valve.
-Throttle motor.
-Throttle valve tight/sticking.
-Engine control module (ECM).

Error Code: P0100
Fault Location:
-Mass Air Flow (MAF) Sensor/Volume Air Flow (VAF) Sensor - Circuit --Malfunction
Possible Cause:
-Wiring harness.
-Mass air flow (MAF) sensor.
-Volume air flow (VAF) sensor.
-Engine control module (ECM).

Error Code: P1491
Fault:
Exhaust Gas Recirculation (EGR) Valve Insufficient Lift
Possible Cause:
-Wiring harness.
-EGR Valve.
-ECM

Error Code:P1607
Fault:
-Engine Control Module (ECM)/Powertrain Control Module (PCM)

Error Code: P0966
Location:
-Pressure Control (PC) Solenoid B - Circuit Low
Possible Cause:
-Wiring short to earth.
-Pressure control (PC) solenoid.
-Engine control module (ECM)/Powertrain control module -(PCM)/Transmission control module (TCM) .


Apr 30, 2013 | 2004 Honda Civic

1 Answer

What does error code po671 mean


HI,
http://engine-codes.com/p0671_gmc.html

It's a Glow Plug.

Possible causes- Cylinder #1 glow plug circuit is open or shorted
- Faulty cylinder #1 glow plug
- Faulty glow plug modulehelp.png Help with thisSymptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of Power
- The engine may be harder to start
- Engine hesitation

Read more: http://engine-codes.com/p0671_gmc.html#ixzz28UT1VO75

Oct 06, 2012 | 2008 Dodge Sprinter

1 Answer

Check engine light stays on. Had code cleared 3 times and when I drive a block it comes back on. When it starts the engine surges on its own and sometimes quits.


Perhaps you need to remember that the engine light is a victum and not a cause. Clearing the codes does not address the issue that caused it to come on.
Pull the error code and follow that indication. REMEMBER that codes are a CLUE and not necessarily the cause. For example, an intake leak will cause misfiring and that makes high hydrocarbons, and that may cause an oxygen sensor error, but the sensor being out of range is NOT the issue, but the result of the issue....

Follow the indications from the error codes. Reset, as you now know, does nothing.

Mar 17, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

What is error code po 304 and po316


P0304 is Cylinder 4-misfire detected-probable cause is as follows. Engine mechanical fault, wiring, ignition/fuel system, injector, ECT/MAF sensor, ECM

P0316 Misfire detected during startup-first 1000 revolutions- probable cause is as follows-Engine mechanical fault, wiring, ignition/fuel system, injector

Aug 18, 2009 | 2003 Mercury Sable

2 Answers

1999 Honda Civic EX fault codes 1366 and 1399


This code is not documented so the code reader is giving a false reading.
If the car runs OK and check engine light is not on, I would forget about it.

Nov 25, 2008 | 1999 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...