Question about 2000 Chevrolet 2500
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you are sure the fuel pump relay is working, check continuity from the pump to the relay socket. These wires love to corrode. When you turn your ignition on, the fuel pump will only run for a couple seconds before it shuts off via the automatic shutdown relay. Make sure you are checking power within this window. The PCM (powertrain control module) is what completes the ground in order for the relay to send power to the pump. If the PCM does not recieve a signal from several sensors (mainly the Crank Sensor) it will not turn on the pump. You may want to check these sensors, is the check engine light on? You can scan it to see if any sensors have thrown a code. Be sure all applicable fuses are ok, the PCM may have its own fuse, check that even if the fuel pump fuse is ok. Your Truck may also have an inertia switch for the fuel pump which shuts it off during an accident. Check that as well.
Posted on Mar 20, 2009
There is no fuse specifically dedicated to the fuel pump on this year and model of Suburban. This Suburban is equipped with dual tanks and as such has two relay switches, primary and secondary, both of which are located at the main fuse box in the engine bay, that power up the respective fuel pumps.
The closest fuse (15A) controlling either of these relays also powers up the main control module (located beside and below the main fuse box). So, if one needs to disconnect the fuel pumps from functioning, then the only effective method is to disconnect the fuel pump relays.
Posted on May 28, 2009
The fuel pump relay is located Under hood, driver side, upper firewall, mounted in
The fuse is located under the instrument panel to the left of the steering column. The fuse block should be visible from underneath the steering column, near the pedal bracket. If the panel is not visible, check for a removable compartment door or trim panel which may be used on later models to hide the block.
Posted on Jun 03, 2009
Tips for a great answer:
Sep 16, 2014 | 1996 GMC Safari
Mar 05, 2013 | 1989 GMC K1500
May 07, 2011 | GMC Vandura Cars & Trucks
Feb 24, 2011 | 1995 GMC Sierra C1500
Feb 24, 2011 | 2004 GMC Sierra 2500
Nov 18, 2009 | 2001 GMC Sierra 2500HD
Oct 08, 2009 | 2003 GMC Sierra 1500
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: