Question about 2008 Dodge Avenger

Open Question

P1005 fault code

Possible cause of this dodge specific code???

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

wilsodfarm
  • 986 Answers

SOURCE: I am getting fault codes 34, 53, & 25 on a '93

On all L-bodies (Omni/Horizon and related cars), along with all vehicles from model years before 1987 with EGR (nearly all of them), code 34 indicates that the EGR solenoid circuit is open or shorted — as indicated by voltages of 0 volts when the solenoid is on, or voltage of 12V when the solenoid is turned off. The power limited light will not be lit and the system will not enter limp mode.

Posted on Nov 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2007 dogde charger and my check engine light is on. I get codes P1005, P0158, P0157 and P0128. I am not sure what these mean or what to do about them can anyone help?


P1005 is model specific, Dodge is a problem with the manifold tuning valve.
Code 158 and 157 are for a problem with the O2 sensor for bank two after the catalytic converter.
Code 128 is for a problem with the thermostat or the engine is not reaching normal temp.
The O2 sensor codes could be caused from the manifold valve or they could be caused by a faulty O2 sensor.
I would start with the coolant temp problem and work back.

Mar 01, 2013 | 2007 Dodge Charger SE

1 Answer

What are the possible fixes for code po307 in a 01 dodge ram 1500


Trouble Code: P0307

Cylinder 1-10 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or EVAP system.Base engine mechanical fault that affects only one cylinder..Fuel delivery component fault that affects only one cylinder (e.g., a dirty fuel injector).Ignition system problem (coil or plug) in only one cylinder.

Jan 20, 2013 | 2005 Dodge Ram

1 Answer

I AM GETTING A TROUBLE CODE P0700 ON MY 2004 DODGE NEON


Code 700 is a general fault with the transmission or trans control module.
Usually you get other codes in addition to 700 which would point to a specific problem.
Its possible the connection between the trans control module and the engine computer failed.

Jan 16, 2013 | 2004 Dodge Neon

1 Answer

How do i fix codes PO355 and PO305


Trouble Code: P0305

Cylinder 1-8 Misfire Detected

Possible Causes:


ASD relay output 2 circuit fault.Injector control 1 circuit fault.Coil control 1 circuit fault.Ignition wiring, spark plug, or ignition coil faultFuel pump inlet strainer pluggedRestricted fuel supply lineFuel pump module fault.Fuel pressure leakdown fault.Fuel injector is damaged or has failed.Engine mechanical problems exist.PCM has failed.Trouble Code: P0355

Ignition Coil No. 1-8 Primary Circuit

Possible Causes:


ASD relay power circuit to the ignition coil is open.Ignition coil primary "driver" circuit open or grounded.Ignition coil is damaged or it has failed.
PCM has failed.Here are the codes and causes.What you can do is Go to Dodge dealer,get oil change and they will scan your vehicle for free and find problem and tell you and how much it will cost and you can decide to let them or go home and do it your self,but you will find out for free what the problem is,they have a reader that pin points the problem,on these others you can replace good parts trying to find problem.

Jan 06, 2013 | 2002 Dodge Durango

2 Answers

I have a problem with my overdrive engaging and diengaging in my 2002 2500 dodge ram cummings diesil truck any suggestions on what could be causing this?


many possible causes,
tires too large brakes dragging???
;possible torque convertor problems,
outside air temp sensor for trans probs
ECM /electrical connection /lockup issues
Trans may need a service?? change oil & filter
Is this a high miler??
Has it sent up any fault codes?

Sep 26, 2010 | 2001 Dodge Ram 2500 Truck

2 Answers

P0700, P0750 and P0755 codes I was driving at 65 mph and the 2003 Dodge Caravan down shifter to low gear and the check engine light came on. It will not ship to high gear.


P0700 (M)
Check Transmission DTC's
This code indicates that the EATX (Transmission controller) has an active fault and has illuminated the MIL via a BUS message. The specific fault must be acquired from the EATX via a DRBIII tool. (Input or Output Speed Sensor failures often cause this code and are a common failure part on WJ Grand Cherokees

P0750
Shift Solenoid circuit.
Note: If code P1767 (Transmission Relay Always On) is also present: Replace transmission solenoid assembly. See note provided. When transmission is in limp mode the relay that provides power to the solenoid group is switched off. This is normal and is designed to provide operation in one gear only. Engineering department suggests to replace transmission solenoid assembly anytime these two trouble codes occur together. See applicable service manual section (21) for solenoid assembly replacement directions. IMPORTANT: When performing this repair always check torque on all valvebody accumulator cover plate screws. Proper torque specification is 70 inch pounds. If any accumulator cover plate screws are damaged or missing replace the valvebody assembly. NOTE: If any other trouble codes are present do not replace solenoid assembly. See test in the applicable Transmission Diagnostic Procedures Manual

P0755
Shift Solenoid B

Oct 14, 2009 | 2003 Dodge Caravan

1 Answer

1995 dodge caravan Break Hangup


this is most likely a fault in the Antilock brake system (ABS) hydraulic controller or a wheel speed sensor, have the system tested for trouble codes.

Jul 12, 2009 | 1995 Dodge Caravan

1 Answer

Engine light comes on - Code shows P0300 and then


OBD II 300 Random/Multiple Cylinder Misfire Detected

When the misfire monitor detects a misfire, it will trigger the check engine light with the specific cylinder number as the last digit in the P030X code. For instance cylinder 1 misfire is P0301, cylinder 2 is P0302 etc. In this case we have either multiple cylinders misfiring, or the computer simply can't determine the specific cylinder, and as such we are left with the P0300 in computer memory.

Possible Causes:

Fuel injectors, related wiring, sensors and computer issues
Running out of gas, or poor fuel quality
Evaporative emissions system (EVAP) concerns: fuel vapors leaking into engine
Incorrect Fuel Pressure
EGR system concerns: leaking EGR valve or restricted ports
Base engine concerns: low compression, valve train problems and timing issues
Ignition system concerns including, but not limited to:
Faulty spark plugs
Faulty coil or related wiring
Ignition module or related wiring issues
Ignition related sensor faults or wiring issues

Apr 04, 2009 | 1996 Dodge Ram 1500 Club Cab

1 Answer

97 Dodge stratus...told oxygen sensors were bad


why what is it doing and did you have check eng light on ? and did you plug in a OBD 2 scanner to retrieve those fault codes that would indicate that specific "code" was the trouble= O2 sensor/or sensors

Dec 22, 2008 | 1998 Dodge Stratus

1 Answer

Fault code I believe is p0300


P0300 is a misfire that the engine computer hasn't or can't pinpoint to a specific cylinder yet

Oct 15, 2008 | 2006 Dodge Magnum

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...