Question about Cars & Trucks

Open Question

Key broke in my 92 ninja 1100 how do I hot wire the ignition

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mcgyver468
  • 710 Answers

SOURCE: the ignition KEY to my 91 camaro broke i want to

Unfortunately your key has a chip in it which prevents anyone from hot-wiring it. Did the key break off inside the ignition cylinder on the column? If so, you should be able to turn the car on right?. If you have to replace the ignition cylinder you must have the key in the cylinder to remove the old one. I wish I could see this up close so that I could fix it for you. Keep me posted please.

Posted on Apr 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost my keys,then I broke my ignition please help I need to hot wire there are 6 wires which


I hope you are only doing this temporarily. Generally speaking, ignition 1&2 would become powered when key is turned to on position. These could be wired to toggle switches. Highly recommend a high amperage momentary contact switch only for the starter lead. Best advice is the get a new ignition switch rather than mess with wiring. Doing so could do un repairable damage to your ignition system, wiring harness, and computer

Oct 03, 2014 | 1990 Toyota 4Runner

1 Answer

Bypassing ignition


You take the hot wire to the ignition switch and twist it together with the run wire out of the switch-then ignition is on, just as if the key were turned to on. Then take the start wire that goes out of the switch and touch it to the hot wire to make the starter work. Soon as engine is started, remove the start wire from hot wire and tuck it out of the way. When you want it off, untwist the hot wire and the run wire.
If you cannot hot wire it like this, check if there is a security system that has immobilized the car. I don't know if a '92 had a security system.

Sep 03, 2013 | Chrysler LeBaron Cars & Trucks

1 Answer

Im buying a 92 couger ,the key wont start it somethings broke inside .the steering is not locked can i hot wire it without messing something up??


You can just replace the lock cylinder. Can you get the ignition into the run position? Dash lights on? Hot wiring it is not as easy as it sounds, but replacing the lock cylinder and fixing it is fairly easy.

Nov 09, 2010 | 1992 Mercury Cougar

1 Answer

I need to install a push button ignition on my 92 Dodge caravan, but I can't find the wiring diagram to the ignition switch so I can find out what wires I need for the button. Any answers


you don't need them,
run your hot wire directly from battery,and the from push button switch to starter solenoid,but you will still have to have the key turned on to run

Dec 11, 2009 | 1992 Dodge Caravan

1 Answer

I replaced the ignition in my 92 camaro because the key broke off inside it. I got a new igition and new key and it wont start. It would turnover, but nothing more


did u check .to make sure all the wires on the bottom of the steering cloum are hooked up. and make sure the ignition switch is the correct on ,if it has the fuel security chip on the key some gm models have a chip in the key this controls the fuel pump ,,whit out it the fuel pump will not turn on

Nov 12, 2009 | 1992 Chevrolet Camaro

1 Answer

I turned my ignition switch and it turned in a circle without turning over. i think the switch broke. how can i hot wire it to get it home?


The ignition switch actuator broke. Turn the key on, on top of the column is the ignition switch. It has a rod going to it. Use some needle nose pliers and push the rod to the front of the truck. Good luck

May 05, 2009 | 1988 Ford F 150

1 Answer

The ignition KEY to my 91 camaro broke i want to hot wire it for now what would be the least destructive way and how


Unfortunately your key has a chip in it which prevents anyone from hot-wiring it. Did the key break off inside the ignition cylinder on the column? If so, you should be able to turn the car on right?. If you have to replace the ignition cylinder you must have the key in the cylinder to remove the old one. I wish I could see this up close so that I could fix it for you. Keep me posted please.

Apr 19, 2009 | 1991 Chevrolet Camaro

1 Answer

Ingnition tumbler broke cant start


If the key won't start it; it might not be the key ignition, but rather; the ignition that has a stem that goes from the key ignition down on the steering colunm. However, you can get key ignitions for them, or buy the whole steering colum then take the key ignition out of it. But, I would suggest more information is needed before I can conclude that it is just the key ignition. Hope this help~!

Jan 19, 2009 | 1990 Plymouth Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...