Question about Jeep Cars & Trucks

Open Question

What does P1130-SWIRL CONT SOL/V mean? - Jeep Cars & Trucks

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 312 Answers

SOURCE: Pls where is Swirl Control Solenoid Valve located in Infiniti QX4

This link shows the location of the SCV, If your motor is different the location should be similiar. http://img510.imageshack.us/img510/5687/vacuumdiagramuh3.jpg

There's a vaccuum line that runs off the SCV to the SCV check switch.

P0442: Have you inspected the lines, charcoal cannister etc? Make sure the fuel cap is tight. The easiest way to check the system is to have someone perform a smoke test. I had a DTC on my car which indicated a EVAP problem, it turned out to be the Fuel tank evaporator Control Solenoid.

Posted on Sep 22, 2009

  • 1 Answer

SOURCE: My 1996 nissan truck has a p1130 code where and

The part is actually power acuator valve and its mounts onto the intake maniflold part number is 14517-86G01.

Posted on Feb 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

P1130, P1320, P0172


(171,172) replace MAF , replace air filter with o.e. type (1130) Check vac. lines and connectors to vac. solenoids
(1320) ignition coil primary failure, if all connections are good, replace all the coils

Jan 11, 2014 | 2001 Nissan Pathfinder

1 Answer

Code for 1996 nissan pick up p1130


P1130 Swirl Control Valve Control Solenoid Valve.

Oct 31, 2012 | Nissan Cars & Trucks

1 Answer

I HAVE A QX4 2000 MODEL.WHAT IS THE MEANING OF P1130 SWIRL CONT SOL/V ;AND P0443?


According to Nissan, each cylinder has a valve in the intake manifold to control the air volume in the intake. The code is for one of the swirl control valve solenoids.
Code 443 is for the EVAP canister purge volume control solenoid which is a part the computer uses to vent the gas tank.
I would recommend a shop for both codes.

Jul 05, 2012 | Cars & Trucks

1 Answer

How do i fix p1130 AND P 1440 code on my 2000 Nissan maxima? It takes about 5-6 minutes to crank up.


P1130 Swirl Control Valve Circuit Malfunction - With Automatic Transmission Possible Causes
  • Check for air leaks in the Air Induction system (e.g., in the intake manifold)
  • Check for leaks or looseness in hoses and tubes between the intake manifold, vacuum tank and swirl control valve actuator
  • Check for leaks or looseness in the hoses between the air cleaner assembly and the swirl control valve vacuum check valve
  • Crankshaft position sensor (REF) signal problem
  • MAF sensor has failed (it may be dirty or contaminated)
  • One-way check valve has failed
  • Swirl control valve actuator has failed (it may be damaged or sticking)
  • Swirl control valve control connector is damaged (check pins for damage)
  • Swirl control valve circuit is open, shorted to ground or shorted to voltage
  • Swirl control valve has failed
  • PCM has failed
  • Throttle position sensor has failed
  • Vacuum tank has failed

P1440...EVAP Control System (Small Leak)
Check your fuel cap & reset code,

Good luck, hope this helps,,,

Jul 15, 2011 | 2000 Nissan Maxima

2 Answers

Enciendo el auto y me encinde la luz de check y dice que es el codigo p1130


DTC P1130 - Swirl Control Valve Control Solenoid Valve

Otros detalles acerca de los codigos de falla los puede encontrar en este enlace: manual_detalle.php?manual_id=101

Buena suerte.

May 26, 2011 | 1996 Nissan Pickup

1 Answer

My 1996 nissan truck has a p1130 code where and what is a swirl control valve and how do you fix the problem.


The part is actually power acuator valve and its mounts onto the intake maniflold part number is 14517-86G01.

Jan 13, 2011 | 1996 Nissan Pickup

1 Answer

Engine code p1130


The code P01130 is your swirl control valve ,in intake manifold, helps air flow at idle for better combustion in cylinders helps emissions!
If it runs ok that's your call to fix it. could affect performance!

Sep 23, 2010 | 1996 Nissan Pickup

2 Answers

Pls where is Swirl Control Solenoid Valve located in Infiniti QX4


This link shows the location of the SCV, If your motor is different the location should be similiar. http://img510.imageshack.us/img510/5687/vacuumdiagramuh3.jpg

There's a vaccuum line that runs off the SCV to the SCV check switch.

P0442: Have you inspected the lines, charcoal cannister etc? Make sure the fuel cap is tight. The easiest way to check the system is to have someone perform a smoke test. I had a DTC on my car which indicated a EVAP problem, it turned out to be the Fuel tank evaporator Control Solenoid.

Sep 22, 2009 | Infiniti QX4 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...