- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This slang term "Bakkie" seems to be used for many things. what system or function is it called by the manufacturer?
Truck? engine? vehicle?
OBD II code P2136 is for throttle sensor.
Similar codes are P2135, p2137, the pinpoint tests are available on google (make, model, year, engine. then code and symptom) ( use P2135) that takes you to OBD code website with explanation, pictures, tests and directions for TPS or throttlesensor.
when an engine dies warm, the spark needs to be verified.
see if it has lost spark, disassembly and tools required.
Electronic parts are sometimes temperature sensitive when they are failed................ y'kno, the dizzy whizbang gizzmachi quit zappin. but after it cools, it starts. Fuel or gas related problems have numerous tests, not just pressure. run them all if the spark is present but it still wont start, during the no start is when the tests need to be performed.
The Sprinter is designed by Mercedes Benz, and the 'ADR' is probably an abbreviation for German. But it refers to a 'working speed governor'. On the information I found, there is a two-position switch on the left portion of the steering wheel to set an increased idle speed. Depressing the top of this switch engages the governor (increased idle) and turns the light on. Depressing the bottom of the switch turns off the governor (back to normal idle) and turns the light off.
2506 PCM/ECM Power input signal range/performance 110 IAT Intake Air Temp sensor 1 circuit 104 MAP/ Baro sensor low input You probably did do some damage by not isolating the engine and controls out before the repairs/mods were started.
when this is done idle air volume needs to be relearned .to my knowledge dealer only procedure .i could be wrong but i dont think aftermarket scanner software supports this.more good news.po420 you need a cata lytic converter.p2135 and po 123 you need a new throttle chamber assembly.