Question about Cars & Trucks

Open Question

Remove starter on Honda gxv340 k1 - Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Head bolt torque on honda gxv340


http://outdoorpowerinfo.com/engine_specs/honda_head_torque.asp

Nov 05, 2016 | Honda Cars & Trucks

1 Answer

Remove bendix from honda varadero xl 1000


The bendix is at the top of the starter. Pull the starter, remove the four bolt at the back of it. Pull the cap off the starter. remove the clip on the end and pull the bendix out.. Just a note.. they quit selling bendix and solenoids years ago.. Starter only, all or none.

Oct 11, 2016 | Honda Cars & Trucks

1 Answer

How to remove starter from 06 honda civic


- Remove the ignition key and place it out side the car.
- Remove Negative battery Cable.
- Remove the Positive battery Cable.
- The starter is located under the intake manifold. On the back of starter motor there are two wires which need to be removed prior to removing the starter. One is the thick wire (White) which is attached to the solenoid on starter by mean of a nut and the other thin auto wire (Black/ Red) attached by means of a slip thimble.
- Remove both the wires.
- Remove the two main bolts holding the starter motor and take it out.
saa2e07a46500056901kbad01.png

Apr 13, 2013 | Honda Civic Cars & Trucks

1 Answer

I HAVE A 1998 HONDA CIVIC EX N NEED TO REPLACE WOULD LIKE TO KNOW HOW I CAN THIS THNAK


Disconnect the negative battery cable, unplug the smal wire from the starter, remove the nut that holds the large wire to the starter. Remove the two bolts that hold the starter to the transmission. It's a pretty simple job and only requires basic hand tools.

Mar 03, 2012 | Honda Cars & Trucks

1 Answer

How to remove starter solenoid from 1998 Honda Accord LX 4cyl?


the starter solenoid is integral to the starter.

Dec 26, 2009 | 1998 Honda Accord

1 Answer

How to remove starter from 1998 Honda Accord LX 4cyl?


Detach the cable from the negative terminal of the battery. Caution: If you have an anti-theft radio, make sure you have the activation code before disconnecting the battery.

Remove the battery and battery tray from the engine compartment (remove the battery first, then remove the bolts for the battery tray and remove it.).

Remove the lower radiator hose and the wiring harness from the starter bracket. Make sure they are positioned out of the way.

Clearly label, then disconnect the wires from the terminals on the starter motor solenoid (the smaller cylinder attached to the starter). Disconnect any clips securing the wiring to the starter.

Remove the mounting bolts (two) and detach the starter (pull it gently out of its housing).

Reverse this procedure for installation.

Hope this is of help to you.

Dec 26, 2009 | 1998 Honda Accord

1 Answer

Locating the starter motor on a 2004 honda accord


Disconnect the negative battery cable. Disconnect the positive battery cable (if you have an anti-theft audio system, make sure you have the code).
Drain the cooling system. Remove the intake manifold ( not a real easy task).
Disconnect the starter cable from the B terminal on the solenoid. Disconnect the BLK/WHT wire from the S terminal.
Remove the harness clamp. Remove the harness holder.
Remove the starter retaining bolts. Remove the starter from the vehicle.
d6afbbe.gif
Hope this helps you find it.

Nov 18, 2009 | 2004 Honda Accord

1 Answer

Replace a starter


1999 Honda Civic DX 1.6L MFI SOHC 4cyl
Starter Removal & Installation

c4ae816.gif

Fig. Starter wire connections

304d19e.gif

Fig. A ratchet and long extension may be needed to remove the starter

The factory sound system has a coded theft protection system. It is recommended that you know your reset code before you begin.
  1. Disconnect the negative battery cable.
  2. Remove all wiring from harness.
  3. Remove the lower radiator hose from the bracket on the starter motor.
  4. Remove the starter cable from terminal B located on the back of the solenoid.
  5. Remove the black/white wire from the S (solenoid) terminal.
  6. Remove the two bolts that mount the starter to the transaxle assembly.
  7. Remove the starter.

To install:
  1. Install in the reverse order of removal.
When installing the heavy gauge starter cable, make sure the crimped side of the terminal end is facing out.
  1. Enter the anti-theft code and radio presets.

I hope help you with this (rated this help). Good luck.

Sep 09, 2009 | 1998 Honda Civic

1 Answer

Where is the bolts to remove a 85 honda accord starter???


if youve found the starter motor there are 2 bolt diagnolly across from eeach other12mm from memory. if you cant find the starter look for where the gearbox meets the engine and follow the line

Jun 17, 2009 | 1985 Honda Accord

2 Answers

Removing starter


It's not that easy. Yes, 2 bolts hold the starter down but you have to remove the whole intake manifold to access the starter to remove it.

May 30, 2009 | 2003 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...