Question about 2003 Nissan Murano

1 Answer

Bellhousing leak bellhousing is leaking when vehicle is running

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 726 Answers

Did you just have the fluid replaced in the transfer case?? if the answer is no, the you may have a leak from the series of seals that are internal. you will have to have the transfer case removed and have the CVT seal replaced and other seals inside of the transfer case. lengthy repair and costly also. the transfer case has to be removed to replace the CVT side seal and while you are in there replace seals inside of the transfer case also. that what its sounds like to me. transfer case seal leak or the inside CVT seal leak. however if its leaking right from the bellhousing, it also could be the torque converter seal. this is when proper diagnosis comes to play. if its d converter seal, than the trans has to come out. have this one checked by someone that knows what they are doing. could be transfer case seal leak and it could be converter leak.

Posted on Jul 12, 2013

Testimonial: "i replaced the input shaft seal and the shaft o ring in the tranny still same problem "

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can oil leak from intake manifold


Yes, you may want to replace the gaskets..

Nov 18, 2015 | 2003 Chevrolet S-10

1 Answer

V6 coolant leak


If it is in fact between the bellhousing and block, and not leaking down onto the outer surface of the bellhousing, its the freeze plug on the back of the block.
The engine or trans would need to be pulled to get to it.

Feb 03, 2014 | Pontiac Firebird Cars & Trucks

1 Answer

Leak from the bell housing


Chances are its the front pump seal.

Jul 12, 2013 | Nissan Cars & Trucks

1 Answer

Coolant leak bellhousing 27


More than likely the housing has a crack or a bad gasket. The best way to find out is to disassemble it or take it in to the shop.

Jul 11, 2013 | 2001 Chevrolet Silverado 1500

1 Answer

BAD TRANSMISSUION LEAK


Check the axle shaft seals where the two drive axles enter the transaxle. If leaking there the axle will have to be removed to replace the seal.
Look at the bottom pan of transaxle. If leaking from pan gasket, the pan will have to be removed and transmission drained to replace pan gasket.
There is a transaxle main shaft seal on the front of transaxle, hidden by the bellhousing that mounts to rear of engine.. If the shaft seal is leaking, fluid will be dripping from bottom of bellhousing, and when inspection cover is removed, fluid will be evident inside the bellhousing.
Check also the transmission fluid cooling lines, where the two lines exit the transaxle case, and go to front of car to an external cooler mounted in front of radiator, or going into a separate reservoir in the radiator.

Jan 18, 2013 | 2000 Chrysler Concorde

1 Answer

When Shifting into 3rd, shift didn't "feel" right, pedal went almot to the floor, and no clutch! Looking from underneath where slave cylinder line runs into bellhousing looks like theres a tab...


Low fluid tells you something is leaking. Check the rear of the clutch master (check under the dash)and the line to the slave cylinder. If the slave is mounted outside on the bellhousing check that too. If it's inside, look for dripping at the bottom of the housing. Do your checking after re-filling the master and have someone pump the clutch to build pressure it's easier to see a leak that way..
Once you identify the leak source you can determine what needs doing to repair it.

Apr 17, 2011 | 1989 Jeep Cherokee

1 Answer

Radiator fluid dripping down transmission bellhousing


Either one of the coolant hoses routed near the firewall is leaking (heater core lines, etc) or the intake manifold gasket (common failure point on those vehicles) is leaking and will need to be replaced. You will have to either run the engine or pressurize the system and look for leaks.

Jul 31, 2010 | 1997 GMC Jimmy

1 Answer

91jeep clutch quick pedal loss, barely shifts


Look inside the vehicle at the firewall where the clutch pedal rod goes into the master cylinder. See if there is fluid running down the inside firewall. Next look at the bottom of the bellhousing to see if fluid has been coming out of it. That will tell you if it's the master or slave cylinder. Most likely it is the slave leaking inside the transmission bellhousing.

Jun 07, 2009 | 1991 Jeep Wrangler

1 Answer

Transmission fluid leak


Transmissions can leak anywhere there is a seal, fitting or gasket. Most common leaks are at the trans pan gasket and fittings.. However, to find a leak the only way is to get under there and look. A mid sized leak will clean off road debris and leave a track. Keep in mind that all leaks run down and that while driving this can be blown towards the rear of the vehicle. If you find a suspicious area, clean it off with a rag & some solvent and run vehicle...watch that area for seepage. Also check cooling lines to radiator. Fluid coming from inside bellhousing indicates a bad front seal (requires trans removal to repair) Fluid should be (for aw4 units) Mercon, or any quality synthetic that covers mercon application.

Feb 21, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Nissan Murano Logo

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...