Question about Cars & Trucks

1 Answer

I have a check engine light with a code P0013: cam shaft circut. Will this pass an emissions test?

The check light is intermitten.

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 134 Answers

Most probably the system will not pass the emission test as it is related to air and fuel supply system. The problem relates high and low voltage supply to cam circuit. If high voltage is supplied the light will come on and you may not be able to pass the emission test.

Posted on Jul 12, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: check engine light/2003 toyota CE

your car engine may have some hidden problem, suggest you take it to dealer workshop to have you car ECU scan and it will resolve the problem once and for all.

Posted on Oct 15, 2008

  • 2 Answers

SOURCE: 2001 toyota corolla check engine

Mass Air Flow sensor! Just remove your air filter cover. Go to Auto Zone and purchase some solvent. Spray past the air filter and it should correct the problem. If not, replace the Mass air-flow sensor. This is commonly mistaken for an oxygen sensor. Mine did this and I followed these steps and it fixed the light. BTW, the light stayed on for 5 years before I fixed it. Never hurt anything. It's normally something to do with emissions. Dummy lights. :)

Posted on Mar 30, 2009

  • 3640 Answers

SOURCE: codes p0113 and p1111

p1111 is iat sensor curcuit 1 high input. hope this helps.

Posted on Jun 17, 2009

Pops65Pony
  • 137 Answers

SOURCE: Check Engine Light won't go off

If you have an Advance Auto Parts store where ever you are, they will read the code and tell you exactly what to code is and what it means. Any mechanic who "guesses" isn't a mechanic at all - he's a thief. Emissions leak can be any number of things, but not the gas cap!

Posted on Aug 21, 2009

SOURCE: 1999 volvo wagon won't pass

P0600 is the loss of serial communication link. Generally this is a problem with the wiring in the OBD-II or between the ECU and the connector. Of these is a fault in the ECU. Do you recive any other codes?

Posted on Sep 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What might cause codes p0325 , p0304 to turn my check engine light on during smog test on my1998 Nissan Altima 2.4L No kicking No noise except the drive belt which just started after smog test


This is common in the Nissan's could be the cam and crank sensor these go at around 70000 to 120000 should do both at once to be safe. that will fail an emissions test for sure. hope this helps

Mar 09, 2016 | 1998 Nissan Altima

1 Answer

I have a code P0013, What is that? How did it happen? and how can I fix it?


The P0013 code is the cam shaft position sensor, The other code is related to brakes. The engine in your car is not the type to have CVVT on the cam so it is likely that the sensor may be bad or the wiring to it is damaged or corroded.

Dec 22, 2015 | 2009 Chevrolet Cobalt

1 Answer

P0013


http://volvoforums.com/forum/volvo-s80-18/check-engine-light-codes-p0013-p1332-2000-s80-t6-28693/

Mar 27, 2014 | 2001 Volvo C70

1 Answer

Engine light says p0010 and p0013 codes I changed both cam sensors and cleared the codes but the check engine light is back on and it is running slightly rough when stopped and holding the break ?


The codes are not for cam sensors.
The codes are for the intake and exhaust cam position actuator solenoid circuits.
The engine computer controls cam timing by these solenoids. You'll need a shop manual to get the testing procedures since this is beyond the normal range of a DIY.

Sep 02, 2013 | 2009 Chevrolet Cobalt

2 Answers

Engine Check light


Take it to autozone or another place like it and have them read the codes and tell us what they are.

Jun 19, 2013 | 2011 Jeep Wrangler Sport

1 Answer

2005 Mustang GT emission control light


SORRY, I ALWAYS JUST PUT BLACK ELECTRICAL TAPE OVER THEM...NO EMISSIONS WHERE I LIVE

Apr 08, 2017 | 2005 Ford Mustang GT

1 Answer

I have a 2009 GMC Canyon 43,000 miles. Check engine light came on 2 weeks ago.


The cam solenoid may be bad/worn out or the screen is blocked causing this code . States vary on emissions.

Aug 16, 2017 | 2009 GMC Canyon

1 Answer

Diagnostic code p0013, p0014


Diagnostic Test Code (DTC) P0013 is "Exhaust Cam Position (CMP) Actuator Solenoid Control Circuit"
Diagnostic Test Code (DTC) P0014 is "Exhaust Cam Position (CMP) System Performance"

DTC P0014 can be caused by several things that can affect your variable cam timing system performance including using the wrong viscosity engine oil. However, since you have the DTC P0013, it is pretty obvious that the problem is being caused by a circuit malfunction in the control solenoid circuit. It could be as simple as a loose connection at the solenoid electrical connector. It could be that the solenoid itself has an open circuit in its coil windings, or it could even be caused by squirrels or mice chewing on the wiring harnesses in your engine compartment. You must diagnose the circuit to find the cause. Fixing the control solenoid circuit will most likely make both of these codes go away.

Dec 17, 2011 | 2006 Chevrolet HHR

1 Answer

IF MY GROUND WIRE WAS NOT DISCONNECTED WHILE MY CAM SHAFT SENSOR WAS INSTALLED WOULD I STILL FAIL MY EMISSION? I FAILED EMISSION BECAUSE OF MY CAM SHAFT POSITION SENSOR, SO I BOUGHT A NEW ONE HAD IT...


It should pass if the problem was erased from the computer. You should have received a "check engine " light warning about a problem. The light should be off now that the computer is cleared.

I would say that you should ask what Code number was indicated for your problem. I find it interesting that this particular sensor would allow the engine to continue to run if the sensor was bad. Also it may be a good idea to drive 40-50 Miles on the E-way to allow the Catalytics to heat up and stabilize after running so long with a bad part.

If you still have problems with the test, there are a few additives that are suppose to help the car pass the test while the chemical is in the tank. I hope my solution is very helpful to you.

Mar 23, 2011 | 1996 Ford Taurus

1 Answer

I have a 2006 Pontiac G6; 4 cylinder...the check engine light is on and I need to get it off for my emissions test so I need help finding out what the problem is. Ive had the car put on the scanner twice...


when you changed the parts did you have the codes cleared ? as if the comp stored it then it will return and when you put new parts on it took the comp time to test and display new changes.

Jan 19, 2011 | 2006 Pontiac G6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...