Question about Cars & Trucks

1 Answer

How do i remove the dash from a 97 chevrolet silverado?

I need to remove the entire dash, i removed all panels, i need to know what is holding the dash on so that i can remove it completely to access my baffles. I need to remove all of the gray, the entire dash.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Bolts on either side of doors and on top closest to the windshield then pop glove box out by pushing in either side of the wings and pulling down, then check fir bolts all around the dash cover and pull up and out

Posted on Jul 13, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
c17hydro
  • 2984 Answers

SOURCE: need to remove left rear door panel

  1. If equipped, remove the window crank handle by using a retaining clip removal tool.
  2. Remove the door handle bezel by inserting a flat trim removal tool between the door panel and handle bezel to release the locking tabs.
  3. Remove all door panel electrical connectors .
  4. Remove the door panel push pins and trim screws. Lift the door panel up and out to release the door panel locking tabs.

Posted on May 22, 2009

  • 1986 Answers

SOURCE: learn to remove front door panel to access window

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • 1986 Answers

SOURCE: remove passenger side mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

dmsr63
  • 2050 Answers

SOURCE: 2001 Chevrolet Silverado How to remove rear axle

Remove...
wheels, drums or rotors, the cover for the differential (You will need a drip pan)
remove the "pin" (usually a 5/15" or 8mm head) that secures the spider gear pin. Remove the long spider gear pin, as it should slide out without a lot of force.
Push both axles inward, and remove the left and right "c" clips that hold the axles in.
Note... if you have a limited slip, it may be a little different of a set up due to clutches in the differential.

Posted on Nov 05, 2009

  • 335 Answers

SOURCE: 1999 chevrolet suburban: door panel removal

hello here is the instructions for removing the door panel.

  • Remove the door handle bezel.
  • Remove the window handle,.
  • Remove the power accessory switch panel.
  • Remove the trim panel upper extension
  • Remove the trim panel screws.




  • Remove the courtesy light,
  • Remove door panel screws.
  • Remove the trim panel from the door, carefully sliding the trim panel up to release the retainers from the door.
  • Remove the speaker wire.
  • 3470484.gif

    Posted on Jun 19, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    2 Answers

    I am attempting to remove/reinstall the Evaporator Core in a 1999 Chevrolet Cavalier 2.2 coupe. Am I going to be able to do so without removing the entire dash? In other words, will I be able to access...


    In order to replace the evap core, you will have to remove the entire dash. A guideline, or general order of parts removal would be:
    • Remove lower panels beneath the dash.
    • Remove the lower dash panel below the steering wheel.
    • Remove the glove box.
    • Remove the radio and bezel surrounding it.
    • Remove the instrument cluster and bezel surrounding it.
    • Lower the steering column.
    • Remove the passenger airbag. Make sure you disconnect the battery for safety.
    • At this point you're getting close you should be able to start removing all the bolts that secure the dash.
    Good luck, that's a pretty big undertaking.

    ~Brandon

    May 28, 2011 | Chevrolet Cavalier Cars & Trucks

    1 Answer

    I have a 1991 Chevy 1500 Series Silverado Extended Cab Pick Up. My light switch seems to be burned out and I need to know how can I fix it?


    first youll have to take the dash loose by removing the allen screws that hold it in, after that its pretty easy phillips head screws hold it to the dash and the plug just unplug remove the screws holding it replace and reverse the removal. i hope this helps

    Feb 12, 2011 | 1991 Chevrolet C1500

    1 Answer

    How do I remove the entire dash to replace with new dash of 2002 Chevy Silverado Z-71


    O my! First pull all the nobs off from the heater controls,an so on. Then remove the 'hidin' screws. Some are really hard to see. When you do get them all out the dash will come out very easy. Do Not use force!! When you think you have all the screws out, Gently pull! There will be several still holding. Not an easy task!

    Mar 28, 2010 | 2002 Chevrolet Silverado 1500

    1 Answer

    Im trying to get the door panels off my 1999 chevrolet silverado


    There are a few screws which need to be removed, one under the map compartment (bottom of door ) one behind cover at door handle, once these are removed pry door panel out from the bottom up removing it from the clips, once this is complete lift up and remove entire panels off lip at top

    Oct 24, 2009 | 1999 Chevrolet Silverado 1500

    1 Answer

    I need to remove the dash in 2005 chevy silverado


    to remove the dash in your truck you will need to dedicate about 8-10 hours. first start with removing your kicker panels, then the plastic covers on your a-pillars. remove the bezels around your instrument panels. you should be able to see some black screws by now, they should be a 7mm some may be a 5.5mm start removing all the screws you can. next you will need to un plug all of your switches, airbags(yellow plugs), 12v accessory plugs, be sure to remove your battery cables before unplugging all of this. your dash cover is a pain to remove so be patient with it or you will break it easily. to remove your dash cover remove the screws in the front and you will have to pop the back of dash up then remove. next you will need to remove your steering wheel/column this is easily done however you will need alot of extensions for your ratchet to do this. after pulling your steering wheel/column remove the four screws by your windshield to remove your sub-dash i believe they will be a 10mm. remove your sub-dash. next you will need to remove the dash support frame, you will need a 15mm and a 10mm socket to do this, i believe there is 5 bolts holding this on. if needed you can remove the black box that holds your fan heater core blender door cab filters and etc... to do this you have to remove the ac hoses coming out of your dryer can going into the firewall, this will bleed out all of your freeon, next remove the heater hoses, now there are 7 bolts or nuts to remove on your firewall, when you remove those you can pull out the black box.

    Oct 09, 2009 | 2005 Chevrolet Silverado 1500 2WD

    1 Answer

    97 Silverado K1500 350 VTEC 5.7 Stuck in 4 Wheel Drive


    If it has the push button 4wd selector on the dash, it is most likely the transfer case encoder motor. Not to bad to replace but you will have to remove the front driveshaft.

    Aug 19, 2009 | 1999 Chevrolet Silverado 1500

    1 Answer

    R&R passenger side fog light


    The plastic bracket that holds it in has either a 10mm or 8mm holding onto underneath but if you need to replace bulb you dont have to remove the entire assembly

    Jun 21, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

    3 Answers

    01 silverado blend door changed /now works back wards!!!


    most likely needs a LH (bottom) temp actuator. Located in the center of the dash on the bottom, you have to remove the hush panel on the rh side of the truck

    Apr 24, 2009 | 2001 Chevrolet Silverado

    1 Answer

    Dash lights 97 silverado


    dash bulbs are easy take your time.dont know bout heater control light

    Mar 22, 2009 | 1997 Chevrolet K1500

    1 Answer

    I need to remove the control panel to repair the heater.


    the dash bezel will just pop off and you will see two screws on panel remove these and there may be four clips holding panel in release these

    Dec 02, 2008 | 2000 Chevrolet Silverado

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    163 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...