Question about Cars & Trucks

Open Question

Shanghai Top Motor Co. Ltd. Echtop pump EWP - 10

Prefilter joint o ring

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Good day!my question is,where in the tank can i find the fuel filter of nissan exalta 2001.thanks.!


I can't exactly answer your question.

Most cars have a fuel filter fitted in the fuel line and it is this that needs routine replacement. Most such cars are also fitted with a prefilter gauze at the fuel pump intake requiring no maintenance under normal conditions.

A few vehicles have no in-line fuel filter but instead are fitted with an in-tank lifetime filter, again requiring no maintenance in normal conditions.

If you are experiencing trouble I believe the only way to access both the prefilter and lifetime filter is by removing the fuel pump/gauge unit assembly.

Jun 16, 2016 | Nissan Cars & Trucks

1 Answer

Is there fuse panel in 2008 shanghai shenke scooter


Here is a contact for the company:

If you want to contact us, please reference the contact information as below:

Factory Adress:SHANGHAI SHENKE MOTORCYCLE MANUFACTURING CO., LTD ZHEJIANG JONWAY MOTORCYCLE MANUFACTURING CO.,LTD.
Address: HOU RUAN,LU QIAO DISTRICT, Taizhou City, Zhejiang, China
Mr.Leo guan
MSN: guanjinguo@hotmail.com
E-MAIL:kinggo.guan@gmail.com
Mobile:+86-18501138727

May 18, 2014 | Cars & Trucks

2 Answers

How to replace a rover75 front stabiliser drop link


Well is a very had work to do u will have to lose the beam down for you to have space to lose it the bolt are turn upside down normal cars are been losed upward but for rover is down so you lose the beam down and you get to the stabilizer linkage I hope this help

Apr 05, 2014 | 2000 Rover 75

1 Answer

I have this vintage bicycle that I can't find it is a BSA cycle LTD


Can you post a picture of this so we can help you? I have a Friend who is really into BSA Cycles and I will forward the picture to him

Apr 15, 2013 | Cars & Trucks

2 Answers

I need change the fuel pump


Hi, The fuel pump is in the tank. You will have to remove the tank to get at it. Good luck

Jun 21, 2011 | 1995 Ford Windstar

1 Answer

I need a diagram of the rear brake fitted into the brake cylinder


Beijing Huanqiu Guangyang Bearings Co.,Ltd. specialize in manufacturing premium quality ball and roller bearings under our own registered China brand names GPZ, UKB and DYZE. we have been supplying our products to many well-known companies and we are widely accepted through the world Fore more infomation, pls visit our site www.gpzbearing.com In any case of any inquiries, pls don't hesitate to contact us. we sincerely hope there will be the chance for us to cooperate in the new year! Sincerely Yours,
Alan Yu
Export Manager

BEIJING HUANQIU GUANGYANG BEARINGS CO.,LTD
Tel:86-10-58031557
Fax:86-10-58031559
Cell: 86-15101602678
Email:
sales@gpzbearing.com
Yahoo: bearing4@yahoo.com
www.gpzbearing.com

Apr 13, 2011 | Suzuki Swift Cars & Trucks

1 Answer

Pulling a fan clutch assembly from a GMC 4.3 water pump?


First remove the fan from the clutch. There should be four to six bolts holding the fan to the clutch. The clutch is held on to the pump with four bolts. remove the four bolts to remove the clutch. I've included a pic of the pump to indicate the four mounting holes. Not sure if the link will work.

http://www.1aauto.com/scripts/view_full_image.php?image_url=http://images.1aauto.com/EWP/1AEWP00011.jpg&description_id=1090439

Aug 10, 2009 | 1996 GMC Sonoma

1 Answer

How to change a fuel pump


remember you are messing with gas.so no fire,sparks and smoking allowed around car.dissconnect neg. on battery.then relieve fuel pressure by taking off gas cap.take all gas out of tank.undo fuel neck,both straps,hoses and any electrical conectors.take take out from under car.remove any dirt or debri from around fuel pump.there is a locking ring that needs to turn counterclockwise.remove fuel pump and bracket assembly.discard seal.clean pump flange,surface and seal ring groove.apply a light coat of grease to seal to hold in place during install.put seal in ring groove.install fuel pump and bracket carfully to ensure filter dont get damaged.make sure the locating keys are in keyways and seal stays in groove.hold pump in place and install locking ring finger-tight.make sure locking tabs are under the tank lock ring tabs.rotate lock ring clockwise intill it stops fully.put tank back in car.make sure all connections and lines are tight.put only 10gals in tank and check for leaks.put a fuel pressure gauge on the valve on the fuel rail.turn ignition on,but dont start.turn ignition on for 3 seconds then back to off.repeat this 5-10 times or until pressure is at 35psi.if you dont get 35psi or it drops back down check for leaks.if it stays at 35psi then remove fuel pressure gauge and start car.while running check for leaks.this is directly from ford motor co.verbatom.good luck.

Apr 01, 2009 | 1994 Mercury Cougar

3 Answers

97 dodge caravan 3.0 engine leaking water


Try checking all the way around the head gasket.

Jan 19, 2009 | 1997 Dodge Caravan

2 Answers

Fuel pump replacement


It is possible to do it that way but difficult and as you stated the ring has to come off to get to the pump which would be much easier disconnecting lines..Just make sure you mark them to ease installation

Dec 30, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...