Question about Cars & Trucks

1 Answer

I have a 96 ranger 4 cylinder manual transmission recently my sisters boyfriend borrowed it and it jus stalled out and we replaced the starter charged the battery and even Tried push starting it won't start but will turn over

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 12,223 Answers

Try to bypass the starter motor see the diagram attached. and fix it.
However if the problem persist the problem is ignition timing out of manufacturer specification. run the scanner/computer for easy diagnostic and fix it. see the diagramI have a 96 ranger 4 cylinder manual transmission - ebb1f0de-12b3-45f6-a1b6-1ef27eada59a.jpgd96f98d2-e7d7-4b47-a81b-0cad4a837ede.jpg
God bless you

Posted on Jul 11, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75797 Answers

SOURCE: manual transmission car will not start,no sound

does the starter solenoid get power when the key is held to crank and the clutch pedal depressed?

Posted on Oct 21, 2009

alicantecoli
  • 22114 Answers

SOURCE: My 2002 Toyota Camry won't

did you use professional quality jump leads and not them cheap made in china junk ones for the local chinese shop??

Posted on Jun 27, 2011

egadgetguy
  • 258 Answers

SOURCE: Hi, have a toyota avalon, tried starting the car , it won't start, but then the starter engaged and won't turn off evenwithout the key, disconnected the battery and it stopped , when the batte

It sounds like you have a bad actuator. This is attached to the starter and has a solonoid that pushes the starter motor gears into the engine gear. If the solonoid is faulty this may happen. Also check alignment of the same.

Posted on Mar 18, 2012

  • 9 Answers

SOURCE: the 'theft system' light does not turn off with the key in the run position on my 1999 chevy cavalier. car won't start, it won't even crank over. the battery and the starter are brand

try locking your car with the key and unlocking it with the key, leave it for 30 second or so between the locking and unlocking , the car thinks some one has tampered with it

Posted on Mar 18, 2012

  • 147 Answers

SOURCE: My car won't start. The battery is good and the starter is doing it's job. The fuel filter has been replaced. The car will start with starter fluid and run when revved but won't start o

check fuel pump fuse and relay also the fuel injection fuse and ecu fuse, if they are ok remove the back seat and you will see a cover remove the cover and check for voltage at the pump plug and ground, you hear the pump work if not need new pump

Posted on Apr 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my ignition switch sticking?


You could try graphite in the cylinder, but it is a common problem on older Fords, usually resulting in changing the lock cylinder,

Aug 24, 2014 | 1992 Ford Ranger

1 Answer

I Recently swamped my 07' Ford Ranger. A Wave came over the hood and Immediatly it stalled out and luckily for me. After that the the starter would'ent engage. So I got it towed out of the


you may have short circuited the starter. have you tried to turn over the engine manually by turning the crank bolt to see if your engine has seized...water into the intake could have gone into the cylinder(s) and caused the block or head to warp, if all of the above is not relevant then I would have to suggest that it is a faulty starter motor, when the starter failed on one of my jeeps i found the replacement to be rather expensive then I remembered my fathers trick & his favourite phrase - if in doubt then give it a clout! so i smacked the starter motor from the undersiide quite firmly with my FBH F***ing Big Hammer & Lo & Behold it started up first time - hope this helps

Sep 07, 2012 | Cars & Trucks

1 Answer

Truck stalled now wont start


When you jumped the car did the engine spin over any faster or did it stay The same??? If it spun faster then the next step is to see if it is getting fire to the cylinders

Aug 21, 2012 | 1998 Nissan Frontier

1 Answer

M5odr1 2.3 to 3.0?


Check to see if the trans codes match from the VIN or the Ford manufactures plate on the drivers side door jam on both trucks.

Jun 18, 2012 | 1995 Ford Ranger Supercab

1 Answer

'96 Ranger P/U goes off cold idle right after I


you may have some worn spark plug are the gap is not right give this websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your truck wish you the best of luck Michigan Man.

Feb 22, 2010 | 1996 Ford Ranger SuperCab

1 Answer

Won't start while hot, wait an hour fires right up and runs / idles /drives smooth


FORD: 1995-96 CONTOUR, CROWN VICTORIA, ESCORT, TAURUS, THUNDERBIRD
1996 MUSTANG LINCOLN-MERCURY: 1995-96 CONTINENTAL, COUGAR, GRAND MARQUIS, MARK VIII, MYSTIQUE, SABLE, TOWN CAR, TRACER LIGHT TRUCK: 1995-96 AEROSTAR, BRONCO, ECONOLINE, F-150-350 SERIES, RANGER, WINDSTAR
1996 EXPLORER This TSB article is being republished in its entirety to include the 1995 4.6L Thunderbird/Cougar. ISSUE: After a 1-4 hour engine soak time, long crank times and/or long crank to start followed by a stall may occur on some vehicles. No further stalling or rough idle will occur after the engine is running. The long crank and/or stall may be due to the Idle Air Control (IAC) Valve sticking.
ACTION: Replace the IAC Valve with a revised IAC Valve if no Diagnostic Trouble Codes (DTCs) are present. Refer to the following Service Procedure for details.
SERVICE PROCEDURE
  1. Perform normal diagnostics and correct any DTCs as required by referring to the appropriate year Powertrain Control/Emissions Diagnosis (PC/ED) Service Manual.
  2. If no codes are present, replace the IAC Valve by referring to the appropriate model/year Service Manual, Section 03-14. Refer to the following Idle Air Control Valve Application Chart for proper IAC usage.

    IDLE AIR CONTROL VALVE APPLICATION CHART Model Year Vehicle Engine Revised Part Number PASSENGER CARS 1995 Escort/Tracer 1.9L F5DZ-9F715-BA 1996 Escort/Tracer 1.9L F6CZ-9F715-BB 1995 Contour/Mystique 2.5L F5RZ-9F715-AB 1996 Contour/Mystique 2.5L F6RZ-9F715-AA 1996 Taurus/Sable 3.0L 4-Valve F5DZ-9F715-DA 1995 Taurus/Sable 3.0L 2-Valve F5DZ-9F715-EA 1996 Taurus/Sable 3.0L 2-Valve F6DZ-9F715-DA 1995 Taurus SHO 3.2L F6DZ-9F715-CA 1996 Taurus SHO 3.4L F6LZ-9F715-AC 1995 Taurus/Sable 3.8L F68Z-9F715-EA 1995 Crown Victoria/Grand Marquis/Town Car 4.6L 2-Valve F5PZ-9F715-AA 1996 Crown Victoria/Grand Marquis/Town Car/Mustang 4.6L 2-Valve F6AZ-9F715-EB 1996 Mustang 4.6L 4-Valve F65Z-9F715-BC 1995-96 Continental 4.6L 4-Valve F5OZ-9F715-AB 1995 Mark VIII 4.6L 4-Valve F3LZ-9F715-AA 1996 Mark VIII 4.6L 4-Valve F6LZ-9F715-AC 1995 Thunderbird/Cougar 4.6L 2-Valve F5PZ-9F715-AA 1996 Thunderbird/Cougar 4.6L 2-Valve F6AZ-9F715-EB LIGHT TRUCKS 1995-96 Ranger 2.3L F5OZ-9F715-AB 1995-96 Ranger 3.0L F67Z-9F715-AA 1995 Aerostar 3.0L F68Z-9F715-DA 1996 Aerostar 3.0L F69Z-9F715-AA 1995-96 Windstar 3.0L F68Z-9F715-DA 1995 Windstar 3.8L F68Z-9F715-EA 1996 Windstar 3.8L F68Z-9F715-CB 1995-96 Econoline/F-150-350 Series/Bronco 4.9L F68Z-9F715-EA 1996 Explorer 5.0L F67Z-9F715-BA

Nov 03, 2009 | 1996 Ford Explorer

1 Answer

Wont Start


Could be the strater itself or bad connection to the starter from relay

Nov 20, 2008 | 1997 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...