Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: mazda 2003 MPV door locks
I just fixed this same problem. It happened to me 3 different times in
a month so I got good at it. Before you dive into removing your door
try this. Pull the door handle and release it letting it snap back
several times. The problem is a half open door latch that won't let the
door unlock. Do this as aggressively as you can to attempt to get the
latch to return to its original position. Check the door lock between
Ok, if that didn't work, here is how to remove the door.
1. Remove the screw behind the door latch, you will have to pop the plastic cover off first.
2. Remove the rubber insert in the door handle
3. Remove the screw that is now visible
4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the van.
5. Remove the clips that attach to the lock and to the window controls (these can be a pain)
5. (Optional) Remove the bracket that held the window/lock control module
At this point your door is basically free, it is only held in place with plastic clips that can be easily forced off. If your door were open you would simple pull the bottom of the door out (hinged at the window) and lift it off. But since we can't pull because the door is closed we have to force it out.
From here it is pretty simple. Move the seat all the way back and tip the seat way back. Lift the door panel straight up. You will be breaking 2 plastic clips from the rear part but once you do it just pulls out. This is not that easy because the space is limited but just keep pulling and force the rear end of the door panel past the b-pillar. Once you do this it is free.
Have fun and try to keep the black gook from getting everywhere.
Oh, to fix the door lock just oil/grease it and manually move the mechanism several times.
Posted on Nov 11, 2008
Courtesy of: forums.mazdaworld.org
Try this, it works on several 2002 models:
Step 1: Open drivers door and leave open.
Step 2: Lock and unlock the drivers door using the power door lock switch on the door.
Step 3: Insert key into the ignition.
Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.
Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).
Step 6: ECU should respond by locking and unlocking the doors.
Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.
Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.
Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done
Posted on Feb 21, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics.
Posted on Sep 29, 2009
Tips for a great answer:
Nov 29, 2015 | Mazda Cars & Trucks
Nov 03, 2013 | 2005 Mazda MPV
Sep 25, 2011 | 2002 Mazda MPV
Feb 02, 2011 | Mazda MPV Cars & Trucks
Sep 13, 2010 | 2006 Mazda MPV
Oct 16, 2009 | 2001 Mazda MPV
Sep 29, 2009 | 2006 Mazda MPV
Oct 07, 2008 | 2005 Mazda MPV
Jul 31, 2008 | 2006 Mazda MazdaSpeed
Jul 20, 2018 | Nissan Cars & Trucks
94 people viewed this question
Usually answered in minutes!