Question about Ford Tempo

Open Question

Engine revs but no acceleration - Tempo Ford Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is it normal for the revs to stay up when changing gear in a 2002 4x4 3.0L turbo diesel navara?


do they revs drop off when taking pressure off accelerator pedal when out of gear? if only staying high during gear change it would suggest a worn clutch friction/pressure plate so the engine isn't slowing down when clutch is depressed .I'd also have the OBD codes read to see if there is a sensor/switch at fault , but sounds like the clutch to me

Jun 21, 2014 | Nissan Navara Cars & Trucks

1 Answer

Engine revs while constant acceleration


some of the computer have a rev limiter built in and it would give you what you are writing about there my not be anything wrong

Apr 04, 2014 | 2001 Chevrolet Impala

1 Answer

1993 festiva replaced the throttle body gasket now will not accelerate at temp


I have a 1997 ford E 150 customize mark 3 van have driven back and forth to work 5 years ran great Christmas Day drove down to the garage and back up to house and now it will not start turns over has spark will not fire

Jan 07, 2014 | 1993 Ford Festiva

1 Answer

My 1994 BMW 525i e34 came up with the Trans Program warning. Accelerator would not rev the engine!


sounds as if the accelerater cable broke, when you were able to throttle under the hood did you happen to notice if the accelerater cable was moving freely.

Sep 09, 2012 | BMW 525i Cars & Trucks

1 Answer

When turn on the car in the morning, i accelerate and the revolutions up to 6,000rpm normal. In 3 minute when the car up the motor temperature to the normal operation, i accelerate and the revolutions up...


To begin with, if you are revving a cold engine to 6000 RPM, you are asking for a blown engine. Most OBD vehicles are equipped with a rev limiter that will cut off fuel at 3000 to 4000 rpm to prevent you from over-revving your engine and blowing it up. If yours is revving to 6000 RPM cold, then the rev limiter, for some reason is not working while it is cold. I have no explaination for this. The best thing I can tell you is to stop revving your engine so high when it is cold unless you really want to see what an engine looks like after is has gone off like a grenade.

Nov 27, 2010 | 1996 Honda Accord

1 Answer

Vw polo maintains engine revs when foot is off the accelerator.


You need to check the cable the runs from the gas pedal to the engine, it might be rusty and need some drops of penetrating oil at the point it meets with the engine accelerator valve.

Feb 11, 2010 | 2007 Volkswagen Golf

1 Answer

Engine revs to redline


could be accelerator cable

Nov 14, 2008 | 2002 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...