Question about Cars & Trucks

Open Question

Isuzu 3ld1 Cylinder head tightening torque settings

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

c17hydro
  • 2984 Answers

SOURCE: cylinder head torque settings 1990 2.6L isuzu motor

From front to back is this:


7 3 1 5 9



8 4 2 6 10



First torque value is 58 ft lbs.....then final torgue is 72 ft lbs.

Posted on Mar 21, 2009

emissionwiz
  • 75822 Answers

SOURCE: final torque settings for nissan navara d22 diesel engine cylinder head

You do not need to re-torque modern cylinder heads. That went out withe Buffalo.

Posted on Nov 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cylinder head bolt tightening sequence for isuzu rodeo 1998


1998 Isuzu Truck Rodeo 2WD 2.2L MFI DOHC 4cyl

The Head Bolt Torque

Torque sequence ----------------- front ' 7 3 1 5 9 ' of ' ' engine ' 8 4 2 6 10 ' ----------------- Step 1: torque bolts in sequence to 18 Ft/Lbs Step 2: turn bolts in sequence an additional 90-degrees Step 3: turn bolts in sequence an additional 90-degrees Step 4: turn bolts in sequence an additional 90-degrees recheck final torque in sequence

1998 Isuzu Truck Rodeo 2WD 3.2L MFI DOHC 6cyl

The Head Bolt Torque

Torque sequence -------------- front ' 6 1 3 7 ' of ' ' engine ' 5 2 4 8 ' -------------- Step 1: torque to 20 Ft/Lbs Step 2: torque to 47 Ft/Lbs recheck final torque in sequence

Jan 15, 2013 | 1990 Isuzu Spacecab

2 Answers

What are the head torque specs?


1996 Isuzu Truck Hombre 2.2L SFI 4cyl

zjlimited_545.jpg

Fig.: Cylinder head bolt torque sequence-2.2L engine

Apply a coating of 1052080 or equivalent sealer to the cylinder head bolt threads. Install the cylinder head bolts (within 15 minutes of sealer application), then tighten them in the proper sequence first to a torque of 46 ft. lbs. (63 Nm) for long bolts or to 43 ft. lbs. (58 Nm) for short bolts and then tighten all bolts an additional 90 degree turn using a torque angle meter.

Hope this helps (remember to rate this answer).

Jan 25, 2011 | 1996 Isuzu Hombre

1 Answer

I have a 95 rodeo 2.8td just need to know head bolt torque setting


Cylinder Head-

1st Head-- 40-42 ft.lbs 54-57Nm(metric)

2nd Head-- tighten each bolt to specifications as above plus tighten and additional 90 degrees.

Jan 23, 2011 | Isuzu Rodeo Cars & Trucks

1 Answer

What are the torque settings for a 1997 audi a3 1.6 cylinder head


The torque settings for a 1997 Audi A3 1.6 cylinder head:

1. Tightening sequence
tdisline_167.jpg
2. Cylinder head instructions:
2.1. Renew bolts: Yes.

3. Tightening torques:
3.1. Stage 1 - Tighten: 40 Nm.
3.2. Stage 2 - Tighten: 90 degrees.
3.3. Stage 3 - Tighten: 90 degrees.


Please do rate my response. Thanks!

Jan 22, 2011 | Audi A3 Cars & Trucks

1 Answer

Need torque settings for cylinder head bolts on a 52 reg skoda fabia 1.4 16v any help much appreciated thanks


Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Dec 17, 2010 | Volkswagen Polo Cars & Trucks

1 Answer

Cylinderhead bolts torque settings


Its tighten to this amount then by angle

25. Cylinder Head W/intake Manifold
· Clean up cylinder head lower surface and cylinder
body upper surface.
· Install cylinder head as softly.
· Apply engine oil to screw and seat of cylinder
head bolts.
· Tighten cylinder head bolts in following sequence
1st Step

36 Lbs /ft
2nd Step
60° - 1/3 a of a turn
3rd Step
60° -- same

And thats in a spiral out from the center .

Oct 05, 2009 | 1994 Isuzu Trooper

1 Answer

Need cylinder head torque settings and tightening sequence.direct injection 4999cc 4 cyl. ian


This is not necessarily specific for your car but as a general rule of thumb, if you start in the middle of the head and work your way out, torque down to 30 ft/lb first and then a quarter of a turn on second pass. Specific instructions often come with a new head gasket.

Aug 04, 2009 | Isuzu Rodeo Cars & Trucks

2 Answers

Cylinder head torque settings 1990 2.6L isuzu motor


From front to back is this:


7 3 1 5 9



8 4 2 6 10



First torque value is 58 ft lbs.....then final torgue is 72 ft lbs.

Mar 21, 2009 | 1990 Isuzu Spacecab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...