Question about GMC Cars & Trucks

Open Question

2010 acadia map/iat sensor wiring

There are 5 wires. I need the 2 for the map/iat sensor

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: IAT sensor location

Don't even bother installing that, it won't do you any good! Check out the reason why here.

Posted on Aug 31, 2009

Ad
  • 18 Answers

SOURCE: wire colors for my IAT sensor

red with blue stripe and black... cut the red with blue strip and connect one end of the resistor to the harness side. Then splice the other end of the resistor to the black wire... do not cut it just splice into it.

Posted on Dec 21, 2009

  • 3600 Answers

SOURCE: IAT SENSOR

what do you mean by control? there is one wire normally pink or white with pink strip that is power 5 volts + black is ground and a reference voltage 5 volts ground is black or white so the other two colors would be the control wires going to the computer. However would need the first 8 numbers of the Vin to know for sure. you can also go to www.alldatadiy.com and purchase a subscription that will give you the exact information you need, they change color codes for wires from time to time and if you hook it up wrong you can destroy the computer so I suggest you purchase the subscription to be sure.

Posted on Mar 21, 2010

  • 1206 Answers

SOURCE: stalls and backfires 1997 jeep

you need to check the fuel pressure,and did you mean you replaced the distributor or just the rotor because inside the distributor is a pickup plate that some times causes this also 02 sensor can cause this.is your check engine light on if so go to chain auto parts store they usually read your codes for free.

Posted on Nov 26, 2010

jturcotte
  • 8531 Answers

SOURCE: Hello, 2004 Ford Escape XLT

Hi, below is a picture of your MAF sensor. There are 6 pins visible in the connector. Does your sensor have only 5 pins? Maybe one has broke off. The second picture is the wiring diagram for the MAF/IAT assembly. The IAT is the thermister on the right side of the diagram and uses the pink wire with a black stripe and the orange wire. Is this what you needed?

jturcotte_578.jpg


jturcotte_2095.gif

Posted on Aug 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ford ikon fyjb duratec 1,6 16v engine has these 2 fault codes p0113 and p0107.car starts and rough idles then dies down.what needs to be done and what are these codes?


code p 0107 refers to manifold absolute (MAP) pressure sensor/barometric pressure(BARO) sensor---low input===causes ---wiring short to ground---MAP sensor---BARO sensor---ECM
code p 0113 refers to intake temp temperature(IAT) sensor---circuit malfunction====causes ---wiring open circuit/short to positive---wiring short to ground---ground wire defective --IAT sensor---ECM
take it to an accredited service centre that has experience on your make of car and have it diagnosed

Jan 20, 2017 | Ford Cars & Trucks

1 Answer

Need a wiring diagram for map sensor in 2006 Jeep Liberty 4x4 3.7L


Go to autozone and ask for the wiring diagram. They will print one for you for free. If you dont have an autozone near you try another parts store. If you purchase a haines of chiltons manual ($25 in a retail store or $18 on amazon), it will have a detailed wiring diagram of the MAP sensor.

Good Luck!

Jul 13, 2014 | 2002 Jeep Liberty

1 Answer

NO POWER TO SPARK PLUG toyota noah 2003 showing error code p0105, p0110, p0115. some one help me plz.


code p0105 refers to manifold absolute pressure (MAP) sensor/ barometric pressure (BARO) sensor--circuit malfunction===causes --wiring---MAP sensor--BARO sensor--ECM
code p0110 refers to intake air temperature (IAT) sensor--circuit malfunction===causes---wiring ---IAT sensor--ECM
code po115 refers to engine coolant temperature (ECT) sensor--circuit malfunction===causes---wiring--ECT sensor---ECM

Dec 25, 2013 | Cars & Trucks

1 Answer

For a 2005 GMC yukon 5.3L what are the wire colors that control the IAT sensor There should only be 2 wires controlling it but there are 5 on the connection as it controls the MAF and IAT with the sa


The intake air temp sensor is part of the MAF sensor so yes there are 5 wires.
The two wires that go to the air temp sensor are tan and black. The other three are for the MAF.

Apr 20, 2013 | GMC Yukon Cars & Trucks

1 Answer

I have 5 wires going to mt IAT sensor. i need to know which 2 wires lead to the MAF/IAT SENSOR.its a 2004 chevy tahoe z71 4x4 with a 5.3 liter v-8. im putting a computer chip on so need the color of the...


Well im not sure why you are asking this question . They are two differant systems the mas air flow and the idle air intake bolth run off a 5 volt referance voltage but are not related so to speak to each other as far as the same ref voltage the same ground as every thing else .The IAT MAP TP ECT and fuel pressure sensor are one side and the MAF EGR and the EVAP are on the other side but all on a common ground . Ex plain what you are trying to do and why you are trying to do it and mabey i can make your life a little easyer and what caused this problem

Apr 02, 2011 | Chevrolet Tahoe Cars & Trucks

1 Answer

I have a MAF/IAT combo in my 98 plymoth neon 2.0 DOC i need a wire diagram for the wires goin to the sensor


SENSOR GND A BLK/LT BLU
IAT SENSOR SIG B BLK/RED
5 VOLT SUPPLY C VIO/WHT
MAP SENSOR SIG D DK GRN/RED

Aug 03, 2010 | 1998 Plymouth Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...