Question about Cars & Trucks

Open Question

Laser gas kiln j9 - Cars & Trucks

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need an owners manual for modet lt-3k kiln

Do you mean the Dawson LT-3K kiln sitter, a control and monitor for the ceramic kiln? The manual for this is on the product page: . The direct link to the manual is .

If you need information about the kiln, then please check that model number and add a comment with that information. If your kiln is from Paragon, then try for a manual. Paragon makes the Dawson LT-3K.

I hope this helps.

Cindy Wells

Mar 26, 2017 | Cars & Trucks

1 Answer

The set Code button on my Cress E27 kiln quit working, so I need a wiring diagram to determine if q wire is disconnected or corroded

Could you let me know if its the stock Cress controller or other controller. I have the schematics to a Skutt controller. They operate some what the same. Knowing the voltage and phase of your electrical supply connection would tell me what to send you.


Mar 09, 2014 | Cars & Trucks

1 Answer

How to install a stereo on prado J9

stock to stock matching car
aftermaket radio , ask them.

if stock the FSM covers this,
as does

Dec 13, 2013 | 1997 Toyota Land Cruiser

1 Answer

Wiring diagram for gare kiln model 1818

looks like you have a 240v model, if you have 4 wires you should have 2 colors and a white and green, you will need all 4 and looks like it is a 24 amp unit you will need a 2 pole 30a breaker for your panel, you will need to put the 2 colored wires on the breaker and the white wire to the neutral bar @ the back of the panel and the green wire to the ground bar, also @ the back of the panel, best if you have no knowledge of electrical you might want to get a qualified electrician in to install for you, as electricity is very dangerous.

Nov 28, 2011 | Cars & Trucks

2 Answers

My 1990 plymouth laser rs 2.0 liter turbo will start but dies if im not on the gas if i stay on the gas i can drive it but its slow to get up

This could be any number of things unfortunatley. I'd start with fuel pressure. Check the pressure. It could possibly be your fuel pressure regulator.

Jul 01, 2011 | 1990 Plymouth Laser

2 Answers

92 PLYMOUTH LASER... It doesn't seem to be shifting out of third gear... when I press the gas, I have to press on it real hard and it doesn't seem to want to go easily.

Sounds like one of the solenoids is plugged up with dust from the clutches in the transmission.

Have you had the transmission flushed and filled within the last 30,000 miles?

Nov 03, 2010 | 1992 Plymouth Laser

1 Answer

Ford laser 4th gear problem

Your cluch is on its way out and probably needs to replaced, it will not be long before it does this in all gears.

Mar 13, 2009 | 2006 Ford Laser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15360 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides