Question about Cars & Trucks
Keep blowing back engine seal
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
1 Inspect Piston Ring Set Worn or broken piston rings. 2 Inspect Valve Stem Seal Cracked or brittle valve stem seals allowing oil to enter combustion chamber. 3 Inspect Head Gasket - Performance Head gasket leaking coolant into cylinders 4 Inspect Fuel Injector Rich injector 5 Inspect PCV Valve Plugged or damaged pcv valve. 6 Inspect Engine Worn or scored cylinder block 7 Inspect Piston Worn or damaged piston. 8 Inspect Valve Guide Worn valve guides
Posted on Nov 26, 2008
IT IS SEPERATE FROM ENGINE THERE IS A FILLER BOLT AT FRONT OF BOX DRAIN PLUG IS AT THE BOTTOM NEAR THE OUT UT SHAFTS DRAIN IT AND REFILL WITH A SYNTHETIC CASTROL AUTO TRANS FLUID THIS WILL IMPROVE YOU GEAR SHIFTS
Posted on Sep 10, 2009
Testimonial: "Very grateful for reply to my query. Reply in mins. I had tried looking for a reply to my question online without success. Thank you."
My apologies for the delayed response. I am going back and answering questions that were never answered.
Click on the following Link. It has all the Diagrams for the Timing Belt you will need.
Before Clicking, let me know if this helped.
Again my sincerest apologies...
Posted on Feb 26, 2010
1.Disconect lower hose from intercooler and oil (from 0,1 liter or more) (sometimes 1-2 liters) comes out, you should not drive it.(car had probably loose power) Change the turbine, oil and oil filter. do not forget to disconect lower hose and let oil drain out. Otherwise when new turbine is instald, the air flow will **** this oil inside the engine and distroy it.
2.your car is not designed to run without turbine and will not work like normal disel.(SDI).
hope it helps
Posted on Apr 06, 2010
if the old turbo blew,chances are you have swarf in the top of the cylinders and it has burnt the valve seats.white smoke is normally unburnt fuel/water mix.also if the car has been standing it could be just condensation it the exhaust pipes which will dissipate when car is left to run until very hot or thrashed for about 10 mins.hope its the latter.....
Posted on May 11, 2010
Tips for a great answer:
Jun 29, 2017 | Mitsubishi Cars & Trucks
Sep 16, 2015 | Cars & Trucks
Jan 20, 2014 | 2006 Mitsubishi Colt
May 05, 2011 | 1987 Plymouth Colt
Aug 08, 2010 | 1993 Mitsubishi Montero
Apr 06, 2010 | 2002 Volkswagen Jetta TDI
Aug 24, 2009 | 2006 Mitsubishi Colt
Nov 26, 2008 | 2001 Mitsubishi Montero Sport 4WD
Aug 02, 2008 | 2002 Audi A4
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: