Question about Suzuki Grand Vitara

1 Answer

Serpentine belt routing

No diagrm in engine bay dayco doesn't show one. seems to be 1 extra idler. very tight & confusing engine compartment. oh yeah 2.4

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Suzuki Master
  • 1,975 Answers

2.4 ? Are you sure it's not a 2.5 ? also will need to know the year and possibly if it's like a JLS, JLX, JLX Plus, LTD JLS 2WD , JLX 4WD.....There are a number of models and want to be sure I am able to give you the correct diagram. You can reply here or feel free to email directly at with the correct information. Also you may want to try Sometimes they have the diagrams after you add your car and go to the repair help tab.

Posted on Jul 11, 2013

Testimonial: "2010 bought belt for 2.4. Tensioner a/c ps on drivers side,, idler alt w/p passengers side. 1 idler across top,dual cam. 4wd auto."

  • Roderick Virgint Jul 11, 2013

    thnx for your help, diagram shows routing I've been trying for hours. I think the belt must be too thick. find out tommorow



6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 291 Answers

SOURCE: diagram for a serpentine belt

Good luck!!!

Posted on Jun 11, 2008

  • 362 Answers

SOURCE: Serpentine belt routing

Here you go.. I looked up the same belt you did, it should be right.


Posted on Feb 09, 2009

  • 837 Answers

SOURCE: I need serpentine belt routing for 1999 Jaguar XK8

This is a view of the correct belt routing ..


Posted on Mar 24, 2009

  • 15935 Answers

SOURCE: belt routing guide


Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on Apr 23, 2009

  • 1959 Answers

SOURCE: i NEED 2005 mazda6 Serpentine Belt Routing

There are 2 engines for your Mazda 6, a 2.3 and a 3.0. Below are both diagrams:


Posted on Sep 08, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Please whats the belt number or serial number for 2006 Hyundai Tucson v6? My own got cut n got lost cant find it or know d number to get a new 1. I also need the diagram to fix new belt.

this is the Dayco part number.this is the 2.7L 6 cylinder engine with A/C.the belt routing diagram is under the hood on the radiator shroud.this belt is $28.99 at Autozone.if needed they can print you a belt routing diagram on most vehicles,for free! Dayco Serpentine/Belt
  • Part Number: 5060790

Oct 31, 2015 | Hyundai Cars & Trucks

1 Answer

Serpentine belt

With A/C


Accessory Drive Belts


Accessory Belt Routing

0996b43f802319a9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory serpentine belt routing-3.5L engine

0996b43f802319a9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory serpentine belt routing-3.5L engine

0996b43f8020700d.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Accessory serpentine belt (A) routing-3.8L engine


Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.

Removal & Installation

  1. Disconnect the negative battery cable.
  2. Rotate the auto tensioner clockwise to release tension, then remove the drive belt.

To install:
  1. Install drive belt (A). Route the belt over the components in the following order: Crankshaft pulley - A/C pulley - idler pulley - generator pulley - water pump pulley - P/S pump pulley - tensioner pulley.
  2. Rotate auto tensioner arm in the counter-clockwise moving auto tensioner pulley bolt with wrench.
  3. After putting belt on auto tensioner pulley, release the auto tensioner pulley slowly.

    0996b43f802319a9.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Accessory serpentine belt routing-3.5L engine

    0996b43f8020700d.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. Accessory serpentine belt (A) routing-3.8L engine

May 09, 2012 | 2006 Kia Sedona 3.8

1 Answer

No Serpentine Belt Diagram Under Hood. Need Diagram

Try this site Dayco Belts, click this link and go through the menu to find your year, model and engine size. On the last page you will find a link to "Routing" this link will show a picture of you cars belt routing.

Aug 25, 2011 | 2003 Buick LeSabre

1 Answer

I need to replace my serpentine belt but i dont know the pulley route

1994 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Belt Routing Diagram (Alt., P.S., Idler & Tens.)


From DAYCO Catalog

I hope help you with this. Good luck.

Oct 14, 2009 | 1994 Chrysler LeBaron

3 Answers

The Serpentine Belt doesnt fit 99 plymouth breeze 2.4L with a/c

I thought the same thing on my 1998 plymouth breeze but it was because I didn't route the belt correctly. Maybe this will help:891861b.jpg

Sep 20, 2009 | 1999 Plymouth Breeze

1 Answer

Trying to install a serpentine belt after replacing water pump and can't get the right route

Here's a link to a web site and page for your year dodge. Just scroll down to your engine and on the left side under PART NUMBER list look for Belt Routing Diagram. If it's not listed under your engine it should be under one of the others.
Hope this helps.

Sep 12, 2009 | 2004 Dodge Ram 2500

1 Answer

Routing of serpentine belt for ford escort zx2

Click on the link below, Enter the year,make,model, and engine. You will get a page with a link to the diagram you need under the part number.

Jun 17, 2009 | 1999 Ford Escort

2 Answers

Is there another way to run serpentine belt without using the ac at all?

No - because of the routing of the belt around the idler pulley (above "A/C" in diagrm below)- there must be an AC pulley - or dummy pulley of the same diameter installed.

Getting a shorter belt and eliminating the A/C pulley cannot be accomplished because of it's proximity to the flywheel - and must go on top of the idler pulley so there is enough contact friction to drive the belt fully.

Thanks for using FixYa - a FixYa rating is appreciated for answering your free question.

May 12, 2009 | 1994 Ford Taurus

3 Answers

Need diagram for routing of the serpentine belt on 98 ZX2 Yes having problem threading the belt correctly needa an detailed diagram kind regards

Go on the Dayco belts web site. They make serpentine belts and a pretty good data base of belt diagrams for any vehicle they make a belt for.

Feb 02, 2009 | 1998 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

80263 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides