Question about 2007 Chevrolet Uplander LS Minivan

1 Answer

Where can i bleed the fuel system under the hood

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

This is the simplest way to bleed your fuel system short of trying to explain to you where to find an actual bleed port. Loosen any fuel line under the hood until a constant flow of fuel is coming out then tighten the line. Of course ensure you properly prepare the area for the free flowing fuel prior to opening the line.

Posted on Jul 11, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How di bleed the fuel pump


Funny u ask this when u don't even say what the car is here if u want an answer you have to give more details about the car !!

Aug 03, 2015 | Cars & Trucks

1 Answer

Mercury sable 1996 changed fuel filter had brown gas in it did this ruin fuel pump. Can hear pump when trying to start car


Most likely the fuel pump is ok, but there is likely air in the fuel line that you need to bleed off under the hood.

It is possible that the fuel pump went bad, and the way to know is to check the fuel pressure (same place you bleed it under the hood). The fuel pump is in the tank, so it's a real pain to change.

Apr 12, 2015 | 1996 Mercury Sable

1 Answer

Where the heck is the reservoir for the clutch master cylinder on my 84 AMC Eagle.


its made on clutch master cylinder under hood straight thru from clutch pedal fill it under hood take small wrench 5/16 I think get under vehicle find slave cylinder bleed valve you will need wrench a piece of vacuum hose and a cup put wrench on bleed valve then put vacuum hose on next the other end goes in cup of brake fluid to prevent air sucking back it can bubble air out but can only suck brake fluid back have helper pump clutch pedal hold pedal bleed repump rebleed till clutch gets right its harder to bleed than brakes pump fast hold pedal down pump clutch fast hold down bleed real pain in *ss good luck

May 21, 2013 | 1984 AMC American Motors Eagle

1 Answer

How do you replace fuel line to nissan quest


get the new line.
bleed the old one because fuel is under pressure.
I would start under the hood, remove fitting, pull apart hoses.
run the new hose next to the old one.
connect under hood first then remove connection at gas tank.
attach hose at fuel tank. If there is an inline filter replace now will
save time since you are already under car.
Next pull old hose out and throw away.
Last push hose onto mounts from old hose. If they break use cable ties so hose stays in place.
enjoy your car.

Mar 04, 2013 | 1996 Nissan Quest

1 Answer

How to bleed the fuel system


1. Open the hood of the vehicle and locate the fuel pump; it is usually found between the fuel tank and the first fuel filter. Locate the manual primer on the pump. The manual primer can take the form of a lever or a plunger. 2Open the bleed plug on the fuel filter closest to the fuel tank. See the vehicle's owner's manual for the exact location of the bleed plug.3Open the fuel supply valve to allow fuel to flow from the pump to the filter. ----------------------------------------------------------------------
BMW Key Programmer

Dec 12, 2012 | 1990 Geo Prizm

1 Answer

I ran out of gas and now my car wont start. Tried turning the key several time and no luck


ON your fuel rail under your hood is a pressure release valve. It looks like your tire inflation valve. It may have a black cap. remove cap, turn on key, then turn off. press the valve to release the fuel pressure. do this a few time and it will bleed your system off excess air. sounds like you have a vapor lock.

Apr 01, 2012 | 2004 Mitsubishi Galant 2.4

1 Answer

How to bleed the air out of the fuel system after replacing the fuel filter


you really shouldnt have to, but there is a schrader valve( looks like a bike tire valve) on the fuel rail under the hood

Nov 10, 2010 | 2001 Ford Escort ZX2

2 Answers

Have a 2002 kia sportage and has no power to fuel pump nor injectors at crancking time


Check the red 10 amp fuse in the fuse box and be sure it is not blown if it is replace, if not drain the fuel tank cause you are going to be replacing the electric pump in the gas tank.

Jun 14, 2010 | 2002 Kia Sportage

1 Answer

Where is the fuel filter on a 1994 toyota camery


Under the hood, on the drivers side, front side of strut tower, mounted on fenderwell in fuel line. Use caution as pressure is in the lines unless you bleed it off, or run the vehicle for a moment with the fuel pump disconnected to use up the fuel in the line.

I recommend that you fill the new filter with Fuel Injector Cleaner, about half way, this will give you an excellent injector and fuel system cleaning during the first minute or two of running. Can cause a minor sputter, car will run fine in a few moments once fuel flow is fully established and air is removed.

Mar 06, 2010 | 1994 Toyota Camry

2 Answers

No brake pedal after changing brake pads and checking the brake fluid


unless you opened up a brake line,
the pedal should pump back up in place,but pump it with engine off,if you opened up a brake fluid bleeder then you will have to bleed the brake system

Dec 19, 2009 | 1990 Dodge Dynasty

Not finding what you are looking for?
2007 Chevrolet Uplander LS Minivan Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...