Question about Cars & Trucks

1 Answer

I have a 1997 gmc seirra and the turning lights don't work got new flasher good ground and fuse is good

Posted by on

  • Stan Ford Sep 20, 2014

    Check for voltage at the flasher unit, if ok and the bulbs ar ok ,check indicator swich.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 36 Answers

Double check bulbs if one is out none may work, check ground wires and the light sockets, any trailer harness?

Posted on Jul 10, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1201 Answers

SOURCE: 1997 olds cutlass turn signals not working

If you haven't done so already, change both flashers that are mounted in the fuse box, the one for turn signals and the one for the 4 ways.
You might have a bad turn signal switch.

Posted on Mar 13, 2009

  • 112 Answers

SOURCE: 1997 ford explorer turn signals and hazard lights

i think they are behind the dash

Posted on May 16, 2009

  • 6 Answers

SOURCE: the turn signals/flashers and hazard lights on my

check the switch it self may have to replace if everything is good grounds powers and lights, you can use a jumper wire to provide power to a ligh and if it illuminates you know the circuit is good, test each circuit and if all working replace

Posted on Aug 04, 2009

  • 286 Answers

SOURCE: Turn signals and 4-way flashers do not work - 1997 Buick Century

Time to change the flasher unit, it's usually close to the drivers side of vehicle and behind a fuse box access panel and will have something like "12v 23/98W " on it. It's a largish cube shaped componant and may be water damaged !

Posted on Apr 11, 2010

1991fordf150
  • 59 Answers

SOURCE: need a diagram for 1997 gmc seirra 1500 fuse box

you should try freemanualsonline.com or manualsonline.com and print one off

Posted on Jun 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights do not light up when peddle is pressed. bulbs have been changed and, fuses are good


If the high mount light works, and you know the bulbs are good, the problem is probably in the turn signal switch.

Sep 29, 2012 | 1997 GMC Jimmy

2 Answers

Brake lights don't work but third brake light does


I believe the flashers are on a different circute. It sounds like a bad ground.....or one of your taillight sockets is bad. I have a cavilier that had the same problem. I went to a junk yard and found some light socket s and swopped them. So far it has been working. The third light has its own ground. tail light sockets need to have a good ground, some times the ground from batt. to block, ground frome block to frame can be bad.
Think "ground"
Don't try and buy new sockets , unless they are just like the fasctory sockets. getting the entire tail light works good. Find the main tail light, the juce comes to it first, then passes to other side. Check that dide frst. work your wat over to other side, if u cant find a problem, work your way to the front and find out where the lights are grounded.
good luck
Doug

Apr 10, 2012 | 2005 GMC Yukon Denali

1 Answer

TURN SIGNAL LIGHTS NOT WORKINING. I CHECKED THE FUSE, BUT ITS GOOD. THE BULBS ARE GOOD AS WELL. THEY BOTH WENT OUT AT THE SAME TIME. WHAT DO I DO?


Hello alex 10299
Try a new flasher. The flasher is located in the power distribution ctr. under the radio behind the center of the dash. Hope this is helpful.

Apr 05, 2011 | 1997 GMC Jimmy

1 Answer

1997 grand am no turn signal no brake lights fuses are good as new flasher


check your ground; the car will have a common ground for both the rear light fixtures, if the ground is loose neither will work;

Feb 19, 2011 | Pontiac Grand Am Cars & Trucks

1 Answer

Cant find 4 way hazard module 94 seirra


To find the FLASHER on 1994 GMC Truck C1500 1/2ton Sub 2WD 5.7L TBI 8cyl. the Flasher is located: Front seating area, driver side, under dash, driver side of steering column, mounted in relay bracket

Application: Hazard flasher


Turn SIgnal flasher is one independent unit.


Hope helps-

Sep 16, 2010 | 1994 GMC Sierra

1 Answer

Where is the turn single flasher on the 1997 GMC sonoma pickup truck - my flasher / turn single is not working - I have brake , running light ., and have replaced all bulbs in the front and back of truck


The turn signal flasher is located just to the left of the accessory and lighter plugs.It is a black box.It includes the seat belt and ignition key alarm,flasher,and turn signals.Hope this helps.Good luck.

Apr 28, 2010 | 1997 GMC Sonoma

3 Answers

I have no brake lights or turn signals on my 95 gmc truck. I have replaced the boards but no luck. Also have checked fuses.


OK if the fuses are good , use a test light and check to be sure you have power at the fuse terminals. you'll check from ground to the terminal on top of the fuse. you should have 12vdc. then , check for power at your brake light switch on both terminals while the brake pedal is pressed, it is located located on the brake pedal assembly. also , check your hazard flasher switch to be sure it is not on. if it was on, check your flashers, both the turn signal and hazard flasher. If everything checks out , your problem is probably in your turn signal switch assembly located in your steering column.

Mar 14, 2010 | 1995 GMC Sierra

1 Answer

The turn signals/flashers and hazard lights on my 1997 dodge intrepid aren't working. The fuse, flasher, and lights are all new and properly installed.


check the switch it self may have to replace if everything is good grounds powers and lights, you can use a jumper wire to provide power to a ligh and if it illuminates you know the circuit is good, test each circuit and if all working replace

Aug 04, 2009 | Dodge Intrepid Cars & Trucks

1 Answer

Signal light stop working on a 1997 gmc sonona pickup trunk


Check the fuses in the fuse box, if all are good, replace the signal flasher.

Hope this is of some help.
Ed

May 07, 2009 | 1997 GMC Sonoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...