Question about Cars & Trucks
Check the cluch and throw out bearing. Try to adjust the clutch cable so the clutch is fully depressed
Posted on Jul 10, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: cannot shift properly
My Saturn did the same thing - twice. Where the clutch cables connects to the shifter box(??) there is a little clip that had fallen off. The first time this happened, the mechanic told me that I needed to replace the whole shifter box - costing me $400 dollars. The second time - about two years later a different mechanic charged me $15 for the clip and labor.
Posted on Sep 06, 2008
They had a problem with this plastic washer that is in the shifter tower it sits just under the shifter it self and gets worn out and causes this to happen- hope that helps.
Posted on Nov 06, 2008
sounds like the reverse clutch is shot, pull the pan and look for allot of grey material in the pan, some is normal but a big pile is trouble, if it is not to bad change the fluid and filter and use the new DEXRON 6 fluid, it is compatable with all GM automatics, keep your fingers crossed and it should give you a little while longer before u need an overhaul..
Posted on Mar 08, 2009
Most likely the o-ring seal between the torque converter and the transmission is going bad. Get that transmission rebuilt pronto before serious damage is done! But first, have a mechanic drop the transmission pan and look for signs of a very thin silvery film coating the inside of the pan. If found, then the transmission definitely will have to be rebuilt, and the torque converter will also have to be replaced since embedded metallic particles in the old torque converter will eventually come loose, due to wear of the clutch plates within the torque converter, and eat up the rebuilt transmission. Now, here is the deal once the transmission has been rebuilt:
Change the transmission fluid and filter once a year -- no matter what! If you do this, then you should never have any more problems with the transmission.
Posted on Apr 20, 2009
no hydralic fluid in the resvoir look for the resvoir on the fire wall of the drivers side if its empty well fill it back up lol not sure if the sw1 has this but ive had too fix this problem before
Posted on Jun 18, 2009
Tips for a great answer:
Jun 02, 2015 | Nissan Pickup Cars & Trucks
Jun 22, 2014 | 1997 Dodge Ram 2500 Club Cab
Jan 14, 2012 | Cars & Trucks
Oct 04, 2010 | 2000 Chevrolet Silverado
Feb 07, 2010 | Ford EXP Cars & Trucks
Nov 30, 2009 | 1992 Chevrolet S-10
Jun 30, 2009 | 1993 Saab 900
Jan 01, 2009 | 1990 Nissan Sentra
Nov 03, 2008 | 1990 Toyota 4Runner
92 people viewed this question
Usually answered in minutes!