Question about 2001 Pontiac Sunfire
Starts fine then dies after 1 min if i pump gas peddle it stays running like crap
I would guess you have to go back over your work
with regards to the timing chain & cam gear settings
If your at a professional shop, they can look at various data,
to get an idea if timing is an issue since that work was just
Posted on Jul 11, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There will be marks on the cam gear and the crank gear. Some are dots, some are diamond shaped. You just line the two up so the top mark is directly over mark on the crank. You may have to turn the crank by hand which is easier with all the plugs out, to line it up. You will want to drain oil,change filter, and put in new oil to get rid of contaminated oil in oilpan.
If you fail, you are not talking about a lot of money to try to fix the top of the engine compared to engine replacement. For the most part, you could still tow it.
You could ask how much it would cost just to replace the gasket and let someone else bust their knuckles.
Posted on Apr 26, 2009
Possibly a weak fuel pump, idle air control valve, vacuum leaks, or loose or damaged wiring in the ignition system. Check for vacuum leaks first. That's the only one that won't cost anything. Make sure all intake bolts are tight, and all hoses are connected properly and in good condition.
Posted on Jul 20, 2009
the brain is not sending the proper fuel pressure codes to the fuel rail to evenly distribute the fuel to the intake and fuel rail.
perform a fuel pressure test check on it ok? also run a diagnostic scan on it and see what codes come out.
Posted on Jul 26, 2009
Tips for a great answer:
85 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: