Question about Toyota Land Cruiser

Open Question

Toyota Land Cruiser Front Drivers Door Top Hinge

How to put the hinge on.? Do you have to take the wing off..?

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

bigg t
  • 640 Answers

SOURCE: 1997 Toyota Land Cruiser rain water leak

check the sunroof drains,they may be clogged they are located on the right and left front of the sunroof.

Posted on Jun 07, 2008

  • 132 Answers

SOURCE: bolts broke on bottom drivers door hinge

a vw wreckers or dealer will sell you the correct hinge bolts with the year model on you

Posted on Nov 09, 2008

  • 94 Answers

SOURCE: 2004 Toyota Land cruiser key programming

you need to take it to the dealer so they can program the key to the car which requires there software. hope this helps

Posted on Mar 09, 2009

  • 2 Answers

SOURCE: clicking noise on door hinge

there is a plastic piece that slides in the center of the door hing if you look close it will be broke or cracked in half. That is what is causing the noise.

Posted on Aug 19, 2009

  • 105 Answers

SOURCE: How do you change the door hinge pin? On 1997 lincoln town car?

you really don't change the pin,...change the whole hinge,...junkyard! junkyard! good luck, cracklin joe

Posted on Jan 08, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need help putting an aftermarket stereo in a 2001 toyota camry the factory stereo an conector were cut out and are gonna I found a diogram but the car is missing the 2 wires to hook up the rite front?

Look at right front door hinge area to see if the wires show there and trace them under dash. If none at hinge, remove door panel and find them.

Mar 28, 2016 | Toyota Cars & Trucks

1 Answer

How do get access to the top driverside door hinge

Here is the repair procedure straight from Ford manual, but it doesnt give any information about access problems, I will ask a coworker and see if he knows:

Removal and Installation
  1. NOTE: Front and rear door hinges can be removed and installed using this procedure.

    Support the front door (20124) or rear door (24630) for service using Rotunda Flexi-Work Table 156-00070 or equivalent.
  1. Mark the location of the front door upper hinge (22800) or lower door hinge on the front door or rear door and body.
  1. Remove the door hinge-to-body retaining bolts.
  1. Remove the door hinge-to-door retaining bolts. Remove front door upper hinge or lower door hinge.
  1. To install, position the front door upper hinge or lower door hinge to the front door or rear door and body. Install retaining bolts.
  1. Adjust the front door or rear door as outlined. Tighten hinge retaining screw and washer assemblies to 25-35 Nm (18-25 lb-ft) and remove the support.

Apr 19, 2011 | 1996 Mercury Grand Marquis

1 Answer

Need instructions on replacing drivers side door hinge pins and bushings

  • 1. Place masking tape on the inside edges of the door, on both the inside and outside of the door. 2. Remove the door spring by using a door spring removal tool. Insert the tool into the door spring, turn the knob with a screwdriver to compress the spring, then pull out the tool. 3. Set a 5-gallon bucket under the door. This will help support the weight of the door. 4.Place a nail punch under the hinge pin, and strike it with a hammer. Repeat this until the hinge pin begins to come out of the hinge. 5.Place the end of a flat-head screwdriver under the top of the hinge pin, then strike the screwdriver with the hammer to force the hinge pin out of the hinge. 6. Place the bushing on top of the new door hinge pin, and tap it into place with the hammer. 7. Insert the new hinge pin into the hinge. Tap on the hinge pin with the hammer and nail punch to force the pin into the hinge. 8. Insert the hinge spring back into the door, and release the tension on the spring removal tool. 9. Spray the door hinge with a lubricating spray or apply grease.

    I know there are a few directions but it is fairly easy to do. If you have access to an air hammer and a compressor you can use this in place of a manual hammer to make the process a bit easier.

    Hope this helps.

  • Mar 10, 2011 | GMC Sierra 2500HD Cars & Trucks

    1 Answer

    How do you replace the drivers door hinge?

    The hingepin is available in some of the help kits at the parts store. If you are just trying to make the door tight again there is no reason to unbolt the hinge. You just grind or chisel the top shoulder of the pin away and then punch the old pin through the bottom.

    Put the new pin through the hinge and bend a shoulder on the new pin. Some may even use a nut with threads.

    To install the pin or replace the hinge you should open the door and try to brace the bottom of the door with a bucket or books or anything where you can keep the door from changing position. Once braced, a hinge will just unbolt and you can swap it with the new part. Do one hinge at a time if you have 2 on a door.

    Oct 20, 2010 | 2001 Ford Expedition

    1 Answer

    How do you get the hinges off a pasatt door

    you will need a flexible drive attachment for your socket set.....

    Jul 21, 2010 | 2002 Volkswagen Passat

    1 Answer

    Top door hinge worn on disco 1 rear door

    prob have to be new hinge tho at push u can drill and split pin..rjs seem cheapest

    Jan 26, 2010 | 1995 Land Rover Discovery

    1 Answer

    I need back door hinges for toyota land cruiser comerisal 1998

    Look at an auto wreckers near you , they should have lots for cheap.

    Jul 28, 2009 | 1998 Toyota Land Cruiser

    1 Answer

    Bottom door hinge replacement easiest way?

    Hinge, Door Removal and Installation
    1. NOTE: A second person is required if the Flexi-Work Table 156-00070 is not available.
      Support the front door (20124) using Rotunda Flexi-Work Table 156-00070 or equivalent.
    1. Mark the location of the front door upper hinge (22800) and front door lower hinge on the front door and body.
    1. Remove the front door hinge-to-body retaining bolts.
    1. Remove the front door hinge-to-door retaining bolts and remove the front door upper hinge and front door lower hinge.
    1. To install, position the front door upper hinge and front door lower hinge to the front door and body. Install the retaining bolts. Tighten to 25-35 Nm (18-26 lb-ft).
    1. Adjust the front door and front door upper hinge and front door lower hinge as outlined, and remove the support.

    Jul 01, 2009 | 1995 Ford Thunderbird

    1 Answer

    Replace door hinge on Towncar

    you will have to remove the front gaurd to get to the bolts

    Apr 12, 2009 | Ford Lincoln Continental Cars & Trucks

    1 Answer

    Drivers door need alignment

    you will need to put in new hinge pins in the top hinge.they sell them at the auto parts store and all you hav to do is tell them whats going on with the door sagging and they will sell you what you need

    Jan 29, 2009 | 2001 Chevrolet Blazer

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    20 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts


    Level 3 Expert

    76682 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8531 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides