Question about Cars & Trucks

Open Question

Rear axle seal replace 4x4 holden rodeo 2000 - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Rear Axle Removal

if you are talking about the axle seals, 1.REMOVE THE WHEELS.2. REMOVE THE DIFF COVER(slowly)3.REMOVE THE BRAKE CALIPER ASSEMBLY.4.REMOVE THE 8MM PIN IN THE DIFF CARRIER. 5.TURN CARRIER AND REMOVE THE LARGE PIN.6. FIRMLY HIT IN THE AXLE, A SMALL RETAINING C CLIP WILL FALL INTO THE DIFF HOUSING. DO THE SAME WITH THE OTHER SIDE. ( be careful if you have rear speed sensors remove it when you remove the brake calipers . you will break it when you are pushing in the axles.)7.pull axles and replace seals

Posted on May 30, 2008

  • 52 Answers

SOURCE: Rear Axle Seal Replacement

remove rear tires, then remove brake calipers and rotors, then remove the 4 nuts (each side) that hold the axle shafts to the axle tube (located around the axle tube behind the backing plate) then using a slide hammer pull the axle shafts out, next using a die grinder and an air hammer get he retainer collar and the bearing off (without damaging the axle shaft) then remove the seal and the outer race which will still be in the housing. next put it all back together, make sure the plate with the studs is still on then slide the seal, bearing, then retainer on (all new parts) and using a press push them all the way back on. then is simple reassembly.

Posted on Apr 22, 2009

  • 335 Answers

SOURCE: REAR AXLE SEAL LEAKING ONTO BRAKE SHOES NEED INSTRUCTIONS ON HOW TO FIX

Jack up vehicle and support on stands. Remove wheels. Remove differential cover . Locate and remove lock pin that holds cross shaft in. Slide cross shaft out. Push axle inward to release axle c clip. Remove axle and pry out old seal. Install new seal with proper tool.Add some lube to the seal lip to aid axle intallation. Revese removal procedure. This is for a "c" type axle.
Another type has 4 nuts attaching a retainer plate to the backing plate behind the axle flange. In this case the 4 nuts are removed and the axle will come out. This may require a little effort. I think that you have a "c" type axle in your vehicle. Hope this helps. Moe

Posted on Apr 28, 2009

heavymetal77
  • 721 Answers

SOURCE: rear axle leaking

Block the front tires. Break the rear lugs loose. Jack up the rear of the truck at the center if possible. remove the wheels & brake drums. Remove the brake shoes,return springs & all the other hardware. Remove the differential cover & drain oil. If you have a posi the next step sucks. You need to remove the threaded pin from the housing & remove the axle retaining clips. All the while,being carefull of the spring in the posi unit. If no posi,then same procedure,minus the "pucker factor". After the axle is out,take a large flat blade screw driver or pry bar & pop the seal out. Keep in mind the axle bearing is probably gone too , so that's another procedure. Keep it apart,you'll be glad you did.

Posted on Jun 23, 2009

roniecon
  • 6826 Answers

SOURCE: Replaced rear axle pinion bearing and seal, need

There is no torque specs,this nut has to be tightened back like it was ,the best thing to do,was,to late now,is to use a torque wrench to remove the nut,and remember the torque,and when replacing it,torque it back to that spec,the reason being,there is a crush sleeve between the front pion bearing ,and the rear pinion bearing,and it has to be crushed to a certain amount,to aquire deepness into the ring gear,anyway just give it about 25 lbs torque,any more the crush sleeve will crush even more and the deepness of the pinion will be too much.

Posted on Apr 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i remove my axle bearing for a 1992 isuzu rodeo


If it's a rear axle bearing.....your best bet would be to remove the hub\bearing housing\axle assembly and take it to a shop to have it pressed out and new pressed back in. Make sure the seal is done at the same time.......There are a number of manuals (eg. Chiltons) that cover axle removal and replacement.

Oct 15, 2013 | 1992 Isuzu Rodeo

1 Answer

How to remove rear transmission seal from 2000 Isuzu Rodeo(Honda Passport)


the FSM covers this.
or if in USA< login to alldata.com and read.
its all there.

Jun 19, 2013 | 2000 Honda Passport

1 Answer

Holden rodeo 4x4 not engaugeing


ther will probably be a vacuum operated actuator on the shaft to engage the transfer case. Check to see if it has vacuum and is actually working because without it there will be no front wheel drive

Jan 29, 2013 | Cars & Trucks

1 Answer

Changing seals onfront diferentil half axles on 97 chavy astro


Its a long procedure.

Go through the related help links,similar to your issue:---
Click the link below:---
How to remove Front differential? http://howtobyme.blogspot.com/2012/01/how-to-remove-front-differential.html

---------
Timing Belt, Cover, Sprockets, & Seal replacing ? http://technoanswers.blogspot.in/2012/02/timing-belt-cover-sprockets-seal.html

-------------
Crankshaft Front Seal? http://schematicsdiagram.blogspot.com/2011/12/crankshaft-front-seal.html

-----------
Rear Main Seal Leaking? http://whatisbyme.blogspot.in/2012/05/2003-lexus-rx300-rear-main-seal-leaking.html

---------
Differential Chatters? http://whatisbyme.blogspot.in/2012/04/1996-toyota-prado-differential-chatters.html

---------
4x4 front differential will not engage the axle? http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-----------
CV AXLE stuck in Transmission? http://technoanswers.blogspot.in/2012/04/cv-axle-stuck-in-transmission.html

--------
These will help.For more help,keep updated.Thanks.

Nov 06, 2012 | Cars & Trucks

1 Answer

4x4 not working


4x4 selector box under seat needs re setting,the procedure is on
a web site that escapes me at this time. holden service can do this at approx. $90..

Jun 18, 2012 | 2005 Holden Rodeo

1 Answer

89 rodeo has axel seal leaking i removed the differental cover there is no bolt or screw holding the pinion shaft ? how does it come out


Hello dhymer35: My name is Roger and I will help you. The axle is not held by a (C) clip. You must unbolt the 4 bolts holding the rear brake backing plate in order to remove the axle from the rear differential housing.You will probabely need a press in order to press the bearing off in order to replace the seal. The bearing and seal sit behind the retainer flange. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Aug 13, 2011 | 1998 Isuzu Rodeo

1 Answer

2005 GMC 4x4 HD 2500 6.0 eng. rear axel seal


SEAL COULD BE LEAKING CAUSE YOU DIDNT LUBRICATE THE SEAL LIPS WITH PETROLEUM JELLY TO HELP THE THE SEAL LIP SEAL OR YOU DAMAGE THE SEAL WHILE DRIVING IT IN.AXLE FLANGE NUTS TORQUE IS 58 FT LBS THE AXLE HUB NUT TORQUE IS 177 FT LBS.

Jul 14, 2010 | 2005 GMC Sierra 2500HD 4WD

1 Answer

Rear axle is bent


Go-To Car-Part.com
http://www.car-part.com/
Type the year (2000), and make (Honda Passport).
Search for Axle Assy Rear
Ignore 4x4 and focus at 4x2.
You must know the ratio - teeth (41/10 teeth, GT5) or (43/10 teeth, S7C)
(3.2L, 6 cyl, disc), 4x2 (drum brakes), 4.10 ratio (41/10 teeth, GT5)
(3.2L, 6 cyl, disc), 4x2 (drum brakes), 4.30 ratio (43/10 teeth, S7C)
1999 - 2002 Isuzu Rodeo - Honda Passport.
You can get an USED one for $600 plus shipping.
Good Luck.

Jan 04, 2009 | 2000 Honda Passport

1 Answer

Rear Axle Removal


rate me solved...this is all I can find...

figure 1

d164665.jpg

figure 2
c12dde8.jpg

defeae4.jpg

Jun 27, 2008 | 1999 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...