Question about Cars & Trucks

Open Question

Toyota 2kd engine cumshaft cup tourqe - Cars & Trucks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 184 Answers

SOURCE: how to reset timing belt

usually 2 options to reset toyota light.
1.remove small rubber plug in dash clear lense.use a long thin rod to reach in and push the small reset button at the bottom of the gauges.Light will extinguish.
2.remove the instrument panel and unplug all from behind to turn it over.Usually in the centre of the rear you will see two holes and 1 screw.for t-belt.shift the screw to other hole.refit dash ensuring all the plugs are refitted.Light should now be out.

Posted on Apr 02, 2011

emissionwiz
  • 75117 Answers

SOURCE: Toyota Hilux Vigo 2kd cranks but wont start, it is the singapore or dubai version without the orginal toyota immobiliser, also check engine and heater light dont come on. How do i start the car?

Hello

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems.


Posted on Oct 03, 2012

awaissabair
  • 580 Answers

SOURCE: how to change a timing belt toyota vigo engine d4d 2kd

There should be a mark on the cam gear(s) as well as the lower gear driven by the crank indicating TDC(top dead center), with transmission in neutral use a socket wrench with some leverage to turn the crankshaft pulley in the same direction it would turn while running. once the crank is at TDC the cam gears need to align to thier markings, likley at 12 o'clock position. if there is no marks on the bottom gear, unbent a wire coat hanger and remove the spark plug from #1 cylinder and loosly drop the hanger in, make sure nothing falls into the cylinder or any binding occurs in the cylinder. while rotating the crank you can see the wire go up and down as the piston moves, lift the wire a bit every so often to avoid it binding and be sure wire is straight and long enough to always stick up out of the cylinder enough to grab it. when its at its highest point of the compression stroke and just about to go down again, your at TDC and check the cam gear alignment. you should be able to tell the compression stoke from the exhast stroke because you must have it pretty close to start at all, if the cam gear alignment is off by half a rotation, then its the exaust stroke and keep turning. dual cams can be tricky since retentioning the belt will move at least one the gears you just aligned, but you can see how much they move and compensate so once the belt is tight everything is aligned.

Posted on Oct 12, 2012

  • 84 Answers

SOURCE: toyota hilux 2kd cylinder head tourqe

The 2kd engine has same torque settings whether it goes on a hilux, or srx or other. The minimum diameter specs are: 11.6 mm for head bolts, and 12.6 mm for main bearing bolts.
http://www.auto-searchphilippines.com/files/Toyota_innova_E_Specifications.pdf

Posted on Jul 10, 2013

  • 84 Answers

SOURCE: toyota 2kd engine cylinder head tighten tourqe in

Valve clearance is .20mm for the intake and .30mm for the exhaust.
The minimum diameter specs are: 11.6 mm for head bolts, and 12.6 mm for main bearing bolts.

Posted on Jul 10, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Toyota hiace 2kd smokes white in the morning what's the cause n solution pliz


normal water vapor ( steam) from the moisture going through the engine
it will disappear when the engine comes to operation temp
check oil and water levels on a regular basis

Jun 01, 2017 | Toyota Cars & Trucks

1 Answer

I have got a fault code p1226 on my hilux 2kd 2.5l diesel engine and it mostly appears whem the rev goes down under 1000 and when it appears the engine looses power


P1226 is kind of a generic code for the 2kd engine that says something is wrong in fuel system.
Start by having filter changed then probably check fuel injectors for problem if it persist.

Mar 12, 2017 | Toyota Hilux Cars & Trucks

1 Answer

I own toyota hilux 2kd d4d that has a morning cold hard start, after first start all is ok


Excellent answer... short & spot on...
(except YOU didn't mention "OIL CONSUMPTION")

toyota hilux 2kd d4d... Not getting a lot of domestic... (USA)
DIESEL information... here (sorry).

From Bill Boyd here in 1994"

Toyota hilux pick up D4D has hard start in the morning but ok after the...

Jul 24, 2016 | Toyota Cars & Trucks

1 Answer

I have error codes 35 and 78 for Toyota 2.5d4d engine what are these ?


takes a real FSM for your car/engine and country to get that.
we dont have that car here. in uSA. with diesel.

this is a usa forum
so find one in your country for toy, and post there.
others will have the book and help but here? in USA,
nop
IMO,, !

ps wrong engine name to.... see that 2kd? that be correct 2010
so join a real forum and post real engine names.
or google all day engine name DTC 35

Feb 11, 2015 | 2010 Toyota Hilux 2.5

1 Answer

Toyota 2kd engine cylinder head tighten tourqe in n-m


Valve clearance is .20mm for the intake and .30mm for the exhaust.
The minimum diameter specs are: 11.6 mm for head bolts, and 12.6 mm for main bearing bolts.

Jul 10, 2013 | Cars & Trucks

1 Answer

Toyota hilux 2kd cylinder head tourqe


The 2kd engine has same torque settings whether it goes on a hilux, or srx or other. The minimum diameter specs are: 11.6 mm for head bolts, and 12.6 mm for main bearing bolts.
http://www.auto-searchphilippines.com/files/Toyota_innova_E_Specifications.pdf

Jul 10, 2013 | Cars & Trucks

2 Answers

Resetting fuel filter warning light on toyota 2kd


Change the diesel filer element.
Unplug the only connecter on filter housing.
Turn the ignition key to on position.
Go back and plug in the connector after more than five seconds.
The light should go off

Jul 14, 2012 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...