Question about Cars & Trucks

1 Answer

Kia prigio cylinder head tourqe - Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 84 Answers

The correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs.

Posted on Jul 10, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: I need to know the height of a Kia Rio 1500cc 16v cylinder head

go to kiatech .com

Posted on Feb 08, 2009

  • 1 Answer

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2

Posted on Jan 28, 2010

duane_wong
  • 6826 Answers

SOURCE: whats the tourqe on head bolts 1990 4 cylinder

1990–95 VEHICLES

  1. Disconnect the battery ground.
  2. Drain the cooling system. CAUTION
    When draining the coolant, keep in mind that cats and dogs are attracted by ethylene glycol antifreeze, and are quite likely to drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.
  3. Disconnect the hoses at the thermostat housing.
  4. Remove the air cleaner.
  5. Remove the rocker arm cover as outlined earlier in this section.
  6. Remove the rocker arms. Keep them in order!
  7. Remove the pushrods. Keep them in order!
  8. Remove the power steering pump bracket.
  9. Suspend the pump out of the way.
  10. Remove the intake and exhaust manifolds.
  11. Remove the air conditioning compressor drive belt.
  12. Loosen the alternator drive belt.
  13. Remove the compressor/alternator bracket mounting bolt.
  14. Unbolt the compressor and suspend it out of the way. DO NOT DISCONNECT THE REFRIGERANT LINES!
  15. Remove the spark plugs.
  16. Disconnect the temperature sending unit wire. Fig. 6: Disconnect the coolant hoses at the thermostat housing 85353100.jpg
    Fig. 7: Disconnect the coolant hoses at the thermostat housing 85353101.jpg
    Fig. 8: Remove the cylinder head–to–block bolts 85353102.jpg
    Fig. 9: Cylinder head bolt removed from the head 85353103.jpg
    Fig. 10: Removing the cylinder head from the engine block 85353104.jpg

  17. Remove the head bolts.
  18. Lift the head off the engine and place it on a clean workbench.
  19. Remove the head gasket. To install:
  20. Thoroughly clean the gasket mating surfaces. Remove all traces of old gasket material. Remove all carbon deposits from the combustion chambers. Lay a straightedge across the head and check for flatness. Total deviation should not exceed 0.001 in. (0.025mm). NOTE: The cylinder head gasket used on the 2.5L engine is a composition gasket. The gasket is to be installed dry. Do not use gasket sealing compound on the gasket.
  21. Fabricate 2 cylinder head alignment dowels from 2 used cylinder head bolts. Cut the head of the longest bolt off below the hex head. Then cut a slot in the top of the dowel to allow easier removal with a screwdriver.
  22. Install one dowel in bolt hole No. 10 and the other dowel in bolt hole No. 8.
  23. Place the cylinder head gasket over the dowels with the numbers facing up.
  24. Place the cylinder head over the dowels.
  25. Coat the threads of bolt No. 7 only, with Loctite PST sealant or equivalent.
  26. Install all head bolts except Nos. 8 and 10.
  27. Tighten the bolts in the sequence shown in the illustration to the following:
    1. Tighten bolts 1 through 10 in sequence to 22 ft. lbs. (30 Nm).
    2. Tighten bolts 1 through 10 in sequence to 45 ft. lbs. (61 Nm).
    3. Recheck bolts 1 through 10 in sequence to verify that they are 45 ft. lbs. (61 Nm).
    4. Tighten bolts 1 through 6 in sequence to 110 ft. lbs. (149 Nm).
    5. Tighten bolt 7 to 100 ft. lbs. (136 Nm).
    6. Tighten bolts 8 through 10 to 110 ft. lbs. (149 Nm). NOTE: During the final tightening sequence, bolt No. 7 will be tightened to a lower torque than the rest of the bolts. Do not overtighten bolt No. 7.
  28. Connect the temperature sending unit wire.
  29. Install the spark plugs.
  30. Install the compressor.
  31. Install the compressor/alternator bracket mounting bolt.
  32. Adjust the alternator drive belt.
  33. Install the air conditioning compressor drive belt.
  34. Install the intake and exhaust manifolds.
  35. Install the power steering pump bracket.
  36. Install the pushrods. Keep them in order!
  37. Install the rocker arms. Keep them in order!
  38. Thoroughly clean the mating surfaces of the head and rocker cover and install as outlined earlier in this section.
  39. Install the air cleaner.
  40. Connect the hoses at the thermostat housing.
  41. Connect the battery ground.
  42. Fill the cooling system.

Posted on Jul 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is torque settings for head bolts on Kia pregio 2001


What are the cylinder head torque settings for a KIA K2700

www.answers.com > ... > Categories > Cars & Vehicles > Asian Cars > Kia
What is the torque specification for the cylinder head on a 2002 Kia Sportage? ... the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs. ... Thehead bolt torque settings, on your Kia 2.7 diesel engine, is 70 pounds per ...

Aug 17, 2015 | Kia Cars & Trucks

1 Answer

Toyota 2kd engine cylinder head tighten tourqe in n-m


Valve clearance is .20mm for the intake and .30mm for the exhaust.
The minimum diameter specs are: 11.6 mm for head bolts, and 12.6 mm for main bearing bolts.

Jul 10, 2013 | Cars & Trucks

1 Answer

Toyota hilux 2kd cylinder head tourqe


The 2kd engine has same torque settings whether it goes on a hilux, or srx or other. The minimum diameter specs are: 11.6 mm for head bolts, and 12.6 mm for main bearing bolts.
http://www.auto-searchphilippines.com/files/Toyota_innova_E_Specifications.pdf

Jul 10, 2013 | Cars & Trucks

1 Answer

Kia pregio torque setting


Tighten toque main bearing cap for kia prigio

Jan 17, 2012 | 2002 Kia Pregio

1 Answer

Need head bolts tourqe sequence for a 89 tercel


1989 L4 headbolt sequence:
Cylinder Head Bolt Torque Sequence809142031993 L4 headbolt sequence:
Cylinder Head Bolt Torque Sequence80914199they appear to be the same,other than the torque angle. good luck!

Oct 20, 2011 | 1993 Toyota Tercel

1 Answer

I need to find the torque specs for the connecting piston rod? also the sequence and torque for the cylinder head bolts this is for a kia rio 2004 6cyl


22 - 24 ft. lbs. for the rod caps and....
110795143Cylinder Head Tightening Torque and Sequence.

Tighten cylinder head bolts in order shown.
Tightening torque: 36.1 ft. lbs. (49 Nm, 5 kg-m)

Loosen bolts in reverse of order shown.

Retighten cylinder head bolts in order shown.
Tightening torque: 18 ft. lbs. (25 Nm, 2.5 kg-m)

Mark cylinder head bolts for rotational reference.
Rotate cylinder head bolts 90°(1/4 Turn) in order shown.

CAUTION:
  • Do not reuse the old cylinder head bolts.

May 31, 2010 | 2004 Kia Rio

1 Answer

Head bolt tourqe settings on a toyota cressida


Cylinder head bolt removal sequence


Removal sequence: Front 3 7 11 13 10 6 2 1 5 9 14 12 8 4

***CAUTION*** The above sequence must be followed during removal as to avoid warpage of the cylinder head unit

Reverse sequence to install, Step 1: Torque to 10 Ft/Lbs Step 2: Torque to 18 Ft/Lbs Step 3: Torque to 25 Ft/Lbs Step 4: Turn an additional 90 degrees Step 5: Turn an additional 90 degrees Step 6: Torque the 2 recessed 8mm bolts to 13 Ft/Lbs *** CAUTION *** engine uses Torque To Yield head bolts (TTY) that permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed to obtain proper Torque

Don't forget to rate this answer, Good Luck

Apr 24, 2010 | 1992 Toyota Cressida

1 Answer

Head tourqe specs for 403 olds and bolt tightening


Fig. : Cylinder head torque sequence, 260, 307, 350 403 Oldsmobile built engines

5c04c01.jpg


On the V8, tighten the bolts, in the sequence illustrated, to 100 ft. lbs. When all bolts have been tightened to this figure, begin the tightening sequence again, and torque all bolts to 130 ft. lbs.

On V6's, tighten all head bolts in sequence to the following torques:
* All except bolts 5, 6, 11, 12, 13 and 14 - 100 ft. lbs.(19-135.5 Nm)
* Bolts 5, 6, 11, 12, 13, and 14 - 41 ft. lbs. (19-55.5 Nm)
* All bolts except 5, 6, 11, 12, 13, and 14 - 142 ft. lbs. (19-192.5 Nm)
* Bolts 5, 6, 11, 12, 13, and 14 - 59 ft. lbs. (19-80 Nm)

9fb545e.jpg

Hope this help (remember comment and rated this).

Mar 29, 2010 | 1984 Oldsmobile Cutlass

2 Answers

Torque setting cylinder head bolt 4 cylinder KIA sportage


I need the torque settings and pattern for a Kia Sportage 2.2

Nov 24, 2009 | 2001 Kia Sportage

1 Answer

Cylinder head R and R


any competent repair shop or the dealer can give you this, make sure to use new bolts as these are most likley streach fasteners or tourqe to yeild and only work properly once -jeff

Jul 14, 2008 | 2001 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75842 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...