Question about Cars & Trucks

Open Question

How To Remove Starter motor on my 1998 jaguar xk8 4litre coupe

Remove starter motor on my jaguar xk8

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 41 Answers

SOURCE: How do I remove a starter off a 1998 nissan Altima?

need an engine size

Posted on Jan 29, 2009

rockitman187
  • 2559 Answers

SOURCE: 2004 chrysler pt cruiser starter motor removal

You may sneak it out with small fingers with out pulling out the starter.

If starter removal is required,Just unhook the battery cables,Remove the 2 bolts holding the starter on.


Please rate this a fixya

Posted on Feb 08, 2009

SOURCE: 1995 (X300) Jaguar XJ6 Starter Replacement

Remove the windshield wiper motor for access to the top bolt. Use a 13mm dogbone with a pipe or similar for leverage.They used locktite on the bolts,so it's a bear to get loose. This job is a real P.I.T.A. Good luck.

Posted on Apr 07, 2009

  • 122 Answers

SOURCE: How do you remove the starter motor in a 1999 Toyota Sienna?

this sounds correct, however, if you go to autozone.com, the have access to free online manuals, giving you step by step instructions on how to remove. you will need to register and provide some info about your vehicle. it is FREE! the manuals are in the do it your self area. Good Luck!

Posted on Sep 13, 2009

  • 819 Answers

SOURCE: how to remove starter solenoid from 1998 honda accord LX 4cyl?

the starter solenoid is integral to the starter.

Posted on Dec 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace starter motor?


first disconnect the battery, then make sure that the car is lifted. the starter is located near the transmission. remove the small nut, and cable, which goes to your alternator, then remove the larger cable that goes to the battery. remove the starter bolts, and remove the starter. to replace follow the exact same steps in reverse

Dec 28, 2011 | 2007 Chevrolet Cobalt Coupe

1 Answer

How long does it take to replace the starter on a 2000 S Type Jag?


This is a good 4-5 + hour job for a professional.

In this vehicle the steering rack must be removed for access... along with a rear engine height adjusting tool (Jack)

blueextc3221_16.jpg

See the following:

  1. Working from below the vehicle, remove the power steering rack for access. (biggest part of the job.)
  2. Disconnect the starter motor main terminal.
  3. Disconnect the starter motor solenoid terminal.
  4. Remove the starter motor bolts.
  5. Carefully remove the starter motor.
  6. Installation is the reverse of the removal procedure. Tighten the starter motor securing bolts to 38-48 Nm.
  7. Install the steering rack. Refill the reservoir with the recommended fluid and bleed the steering system.
  8. Lower the car.
  9. Connect the battery and install the battery cover.


Thanks!

Sep 27, 2011 | 2000 Jaguar S-Type

1 Answer

How to remove a starter on a 86 jaguar xj6 vanden plas starter does not function


The starter motor is located on the passenger side ( left ) side of the motor. it is held onto the motor with two bolts. Before starting the removal process you must disconnect the battery by removing the ground lead. Under the car disconnect the battery feed wires on the solonoid mounted on the starter. Also disconnect the white with red tracer wire on the solonoid. This is the wire that comes from the starter relay on the firewall. Remove the upper bolt first. You can get at it from the top of the engine bay and then remove the bottom bolt. This starter is heavy. The starters on the later cars were a lot lighter. The starter will clear the engine. Be sure to test the new starter before you install it. Installation is reverse of the removal.

Nov 22, 2010 | 1986 Jaguar XJ6

1 Answer

How do you remove a starter on a 1998 mercury mystique 2.0 litre


Please first see my tip at http://www.fixya.com/cars/r5973094-starter_replace, then see specific instructions below for your Mercury. Let me know if you have questions.
Your starter is in the back of the engine.
from autozone.com
  1. Disconnect the negative battery cable.
  2. Remove air intake resonators. [loosen clamp and remove bolts, lift out resonator]
  3. Remove starter motor upper mounting bolts.
  4. Raise and support the vehicle.
  5. Remove the nuts on the starter terminals and remove the cables from the terminals.
  6. Remove the two starter lower retaining bolts and remove the starter.

e18db91.gif
resonator


eaf7550.gif
upper starter bolts



77b70cc.gif

Sep 26, 2010 | 1998 Mercury Mystique

1 Answer

Can u show graphic for replacing starter motor


I can't show graphics but I can tell you how, firstly locate the starter motor, remove the battery lead from the starter motor,plus the small lead from the solenoid then remove the bolts that secure the starter motor,pull the starter motor out, replacing is the reverse.....hope this helps....cheers

Jul 19, 2010 | 1998 Subaru Legacy

1 Answer

How do i chang starter on my jaguar XJ6 1993 model


disconnect battery ground cable
remove bolt on transmission breather tube to starter mounting bracket
remove top bolt on starter bracket to bellhousing
raise vehicle
remove bottom bolt and leads from starter
lower the starter with braket

Mar 10, 2010 | 1993 Jaguar XJ6

1 Answer

Where is starter located and how to remove it , for a dodge caravan 1998,3.3l


Starter - Removal & installing
  1. Disconnect the negative battery cable.
  2. Raise and safely support the front of the vehicle securely on jackstands.
  3. Disengage the solenoid wiring connector from the terminal. This connection may be held in place by a retaining nut, or it could be a push-in connector.
  4. Remove the B+ nut and wire from the starter motor terminal.
  5. Remove the starter motor-to-transaxle bellhousing mounting bolts.
  6. Remove the starter from the vehicle. If equipped, remove the starter motor spacer.
To install:
  1. If equipped, hold the starter motor spacer in position.
  2. Install the starter motor into position on the vehicle.
  3. Install the starter motor-to-transaxle bellhousing mounting bolts. Tighten the mounting bolts to 40 ft. lbs. (54 Nm).
  4. Engage the solenoid wiring connector onto the starter terminal.
  5. Connect the B+ wire and tighten the retaining nut to 90 inch lbs. (10 Nm).
  6. Lower the vehicle.
  7. Connect the negative battery cable.
  8. Verify starter motor operation.
020fef8.jpg

Disengage the solenoid wiring connector, then the battery positive (B+) nut and wire from the starter motor

98933b2.jpg

Remove the 3 starter motor-to-transaxle bellhousing mounting bolts

e2afde4.jpg

Remove the starter motor from the vehicle


The starter relay is located in the Power Distribution Center (PDC) in the engine compartment. Refer to the underside of the PDC cover for starter relay location.

Hope helped with this (remember rated this help) Good luck.

Nov 18, 2009 | 1998 Dodge Grand Caravan

1 Answer

Location of starter relay on 98 ford explorer


starter relay is under hood on the drivers side fender area.034ad7c.gif
  1. Disconnect the battery ground cable (14301).
  1. Disconnect the starter motor solenoid relay switch wiring.
    1. Remove the protective cover.
    1. Disconnect the push-on electrical connector.
    1. Remove the nuts.
    1. Remove the cable.
    2. d57efc7.gif
    Remove the starter motor solenoid relay switch (11450).
    1. Remove the engine sensor/generator wires.
    1. Remove the bolts and ground wire.
    1. Remove the starter motor solenoid relay switch
    2. 1056336.gif

Oct 22, 2009 | 1998 Ford Explorer

1 Answer

Stater for a jaguar xj8l 1998


starters is mounted on the bottom of engine. its a little long electric motor with a little drive gear that mesh to flywheel to turn engine over to crank.

Apr 29, 2009 | 1998 Jaguar XJ8L

1 Answer

Remove /replace starter/1997plymouth voyager 3.3l


Yes the solenoid does come out with the starter.
  1. Disconnect the negative battery cable.
  2. Raise and safely support the front of the vehicle securely on jackstands.
  3. Disengage the solenoid wiring connector from the terminal. This connection may be held in place by a retaining nut, or it could be a push-in connector.
  4. Remove the B+ nut and wire from the starter motor terminal.
  5. Remove the starter motor-to-transaxle bellhousing mounting bolts.
  6. Remove the starter from the vehicle. If equipped, remove the starter motor spacer.ee03781.jpg3da05b8.jpg

Jan 20, 2009 | 1998 Plymouth Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...