Question about Cars & Trucks

Open Question

Need 2002 suburban neutral safety switch diagram

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
chryslertech
  • 115 Answers

SOURCE: Location of NSS(neutral safety switch) on 2002 Dodge Caravan

It is in side the trans on top of the valve body. Why do you think you need to replace it?

Posted on Mar 03, 2009

Ad
ZJLimited
  • 17970 Answers

SOURCE: Looking for the neutral safety switch

Neutral Safety/Back-up Light Switch

This is a combination switch which controls both Neutral Safety and Back-up lamp circuits.

C6 Transmission


8290dff.jpg

C6 neutral start switch

  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Remove the downshift linkage rod return spring at the low-reverse servo cover.
  4. Coat the outer lever attaching nut with penetrating oil. Remove the nut and lever.
  5. Remove the 2 switch attaching bolts, disconnect the wiring at the connectors and remove the switch.
  6. Installation is the reverse of removal. Adjust the switch and tighten the bolts to 55-75 inch lbs. (6.2-8.5 Nm).
  7. Remove the jackstands and lower the vehicle.
  8. Connect the negative battery cable.
AOD Transmission

e7f4231.jpg

Removing the AOD neutral start switch
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Disconnect the wiring from the switch.
  4. Using a deep socket, unscrew the switch.
  5. Installation is the reverse of removal. Tighten the switch to 10 ft. lbs. (14 Nm).
  6. Remove the jackstands and lower the vehicle.
  7. Connect the negative battery cable.
4R70W Transmission

2f68dfc.jpg


Removing the Manual Lever Position (MLP) sensor

As of 1994, the neutral safety switch is referred to as a Manual Lever Position Sensor (MLP).
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Disengage the harness connector from the MLP sensor.
  4. Remove the 2 sensor attaching bolts and remove the sensor.
To install:
  1. Install the MLP sensor and install retaining bolts. Do not tighten, the sensor requires adjustment.
  2. Adjust the MLP sensor then tighten attaching screws to 80-100 inch lbs. (9-11 Nm).
  3. Remove the jackstands and lower the vehicle.
  4. Connect the negative battery cable.


ADJUSTMENT

C6 Transmission
  1. Hold the steering column transmission selector lever against the Neutral stop.
  2. Move the sliding block assembly on the neutral switch to the Neutral position and insert a 0.091 in. (2.3mm) gauge pin in the alignment hole on the terminal side of the switch.
  3. Move the switch assembly housing so that the sliding block contacts the actuating pin lever. Secure the switch to the outer tube of the steering column and remove the gauge pin.
  4. Check the operation of the switch. The engine should only start in Neutral and Park .

4R70W Transmission


4cc4151.jpg


Adjusting the MLP sensor

Park is the last detent when the manual control lever is full forward. Return 2 detents toward the output shaft for Neutral.
  1. Position the manual control lever in Neutral .
  2. Insert Gear Position Sensor Adjuster tool T93P-700 10-A or equivalent, into the slots.
  3. Align all 3 slots on the MLP sensor with 3 tabs on the tool.
  4. Tighten the attaching screws to 80-100 inch lbs. (9-11 Nm).

I hope help you. Good luck (rated this help).

Posted on Sep 18, 2009

  • 1 Answer

SOURCE: Neutral safety switch chevy silverado 02'

Hi Is a waterpump on a L300 4wd balt driven ?

Posted on Feb 26, 2010

  • 1 Answer

SOURCE: NO REVERSE LIGHTS 1999 K2500 CHEVY SUBURBAN-NEW

move the gear selector back and forth between neutral and reverse, but not all the way. have the same problem

Posted on Jun 23, 2010

dj_relly999
  • 4070 Answers

SOURCE: I Need 4L60E Neutral Safety Switch Wiring diagram

Hi! Please click on the link for this may help. Please click here http://compnine.com/largeimg/960125TC04-066.gif

Posted on Oct 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install neutral safety switch on 1992 Suburban located on steering column


Under the dash on the steering column is a white piece that looks like a crescent moon. That piece is the neutral and backup switch for the steering column mounted shifter.

Jul 14, 2014 | 1992 GMC Suburban

1 Answer

How to replace neutral safety switch in 2002 pt cruiser


get a service manual from auto zone this will help you

Aug 29, 2012 | 2002 Chrysler PT Cruiser

1 Answer

Safety Neutral Switch Problem


I assume manual? There should be a switch at the clutch pedal

Jun 14, 2012 | 1990 Chevrolet Suburban

1 Answer

Where is the neutral safety switch on my 2004 suburban ?


Its possible that your have some "no start" condition or intermittent problem about this; to test it, shift the Trans into Neutral, if the engine starts in Neutral, the problem is the Neutral Safety Switch. If the engine still will not start then the problem will be in the Ignition Switch.

The heat of the engine is usually what does in the starter motor. The Neutral Safety Switch is not common at all. It is fairly easy to remove, it is bolted to the drivers side of the transmission where the shift cable attaches. The problem you run into when replacing the Neutral Safety Switch is that the connectors are glued into the switch and will not come out. This will require replacement of the connectors if you replace the switch.

Hope helps (remember to rating this answer and leave a testimonial comment). Thak you for using Fixya.

Oct 12, 2011 | 2003 Chevrolet Suburban 1500

1 Answer

Will not start in park but will start in neutral is a 2002 chevy suburban z71 5.3 liter 4wd


I would think that the neutral safety switch is bad. It's bolted to the driver side of the transmission. Also check the wiring going to it.

May 08, 2010 | 2002 Chevrolet Suburban 2500

1 Answer

Neutral safety switch chevy silverado 02'


Hi Is a waterpump on a L300 4wd balt driven ?

Feb 26, 2010 | Chevrolet Silverado 2500 Cars & Trucks

1 Answer

'99 Jeep CherokeeWon't Start


Most all your major auto parts stores have web sites, you might find what your looking for there. autozone, napa, advance auto ect. You might want to chk. your ignition switch.

Feb 10, 2009 | 2002 Chevrolet Suburban

1 Answer

Location of NSS(neutral safety switch) on 2002 Dodge Caravan


It is in side the trans on top of the valve body. Why do you think you need to replace it?

Dec 16, 2008 | 2002 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...