SOURCE: REAR ANCLE RATIO
just jack it up and put a white mark on the wheel at the top ,now get yourself a nice long legged female assistant and get her to turn the wheel once and count how many times the prop goes around.Better not use a blonde as she might not be able to count or understand
SOURCE: how to remove rear struts from a avalon toyota
yes you will have to remove the rear seat. the bottom of the seat pulls straight up and out. the back of the seat has twelve mm bolts holding it at the bottom. once those are removed you lift straight up and out, its hooked at top.
SOURCE: HI , JUST WANT TO ASK HOW COULD I REMOVE THE
on the front hinges ther are two spring clips use long nose pliers to remove and slide out pin.put on cover and REPLACE pins/clips.(spring clips look like washers)
SOURCE: i have a toyota prado
I learnt something new today.
If you disconnect the battery on a late model Prado, it can cause the power windows
to do strange things. Can't operate passenger window from drivers side, loss of auto up, ect.
After a bit of research, I found this is normal and they need to be reset.
Each window must be wound down and then up at the door control for that door and held
up for 3 seconds. This resets the power window module.
This may have to be repeated at each door a few times.
SOURCE: how to remove the rear seat on 96 toyota avalon to
You do need to have a spring compressor. Get the McPherson spring compressor. It is a must. You can rent them at O'reillys auto parts, Kragen, maybe Auto Zone. To get a better understanding on how to change it out, I recommend a chilton 95-97 Camary Manual. Now I can't remember the exact tools you need but the ones I can remember are 22mm socket, 14mm socket, 12mm socket, for the 2 large stubborn bolts I had to impact drill them, and with that 12mm socket don't forget to take the brake line off the strut. When you jack up the car try using its stock jack stand if you dont want to bend the running bars underneath where you jack it up as the car is a unibody jacking it up too high will lift the cars whole side and you only need to jack it enough to take the tire off. The back struts require you to take out your back seat which are also easy to take out.
To remove the rear seat here a link, its on a 2000 but should be generally the same. I learn better with pictures anyway, hope this helps!
http://www.toyotanation.com/forum/showthread.php?p=2924042
29 views
Usually answered in minutes!
×