Question about 1999 Dodge Durango

1 Answer

Manual Oil fill tube came off where does it attach?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Contributor
  • 31 Answers

Usually slip into engine block.

Posted on Jul 10, 2013


1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the transmission oil or fluid ?


You do not give the make and model, or whether it is auto or manual, but on most cars there will be a drain plug on the bottom of the trans casing, at the rear, looking like this (at right)

http://www.mazda-speed.com/albums/Garnetmica/Trans_Fill_Drain.jpg

and a fill plug halfway up (left).

On some auto trans there is no fill plug, and these are filled thru the dipstick tube.

Drive around a bit to circulate and warm the fluid, then remove the drain plug first. Drain the fluid into a container (and do not put it into the street drain or sewer). Then replace the drain plug and tighten to about 20 ft-lb, firmly but not enormously.

If present remove the fill plug and fill to the bottom lip of the hole then replace the plug like the first one. You can buy the fluid in bottles with a fill tube to make this easier.

http://forum.e46fanatics.com/attachment.php?attachmentid=236172&d=1185217862
.

Sep 19, 2016 | Cars & Trucks

1 Answer

Front axle vent tube leaks out oil


You are likely to get an oil 'mist' from a vent or breather tube -this is quite normal. The 'mist' cools around the breather and forms a small oily patch. on the axle casing.

Are you certain that the oil is coming from the vent tube and isn't due to a split in the metal casing or from the gasket/seal?

How much oil are you losing? The only other way you would lose oil is if excess pressure was building up inside the differential and to be honest, it's difficult to see how this would occur unless it has recently been over-filled with oil.

If there are drips of oil appearing on the ground underneath the axle/differential chances are that it's the cover seal or the pinion seal at fault. The pinion seal is where the driveshaft/propshaft attaches to the differential. The cover seal is the gasket between the metal cover where the filler plug is and the differential casing itself.

Apr 23, 2016 | 1997 Dodge Dakota

1 Answer

How to replace the oil pan gasket in a f150 1988 truck


Hi there:

  1. Drain the cooling system.


CAUTIONWhen draining the coolant, keep in mind that cats and dogs are attracted by ethylene glycol antifreeze and are quite likely to drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.
  1. Remove the bolts attaching the fan shroud to the radiator and position the shroud over the fan.
  2. Remove the upper intake manifold and throttle body (see Fuel System ).
  3. Remove the nuts and lockwashers attaching the engine support insulators to the chassis bracket.
  4. If equipped with an automatic transmission, disconnect the oil cooler line at the left side of the radiator.
  5. Remove the exhaust system.
  6. Raise the engine and place wood blocks under the engine supports.
  7. Drain the crankcase.


CAUTIONThe EPA warns that prolonged contact with used engine oil may cause a number of skin disorders, including cancer! You should make every effort to minimize your exposure to used engine oil. Protective gloves should be worn when changing the oil. Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used.
  1. Support the transmission with a floor jack and remove the transmission crossmember.
  2. Remove the oil pan attaching bolts and lower the oil pan onto the crossmember.
  3. Remove the two bolts attaching the oil pump pickup tube to the oil pump. Remove the nut attaching the oil pump pickup tube to the No. 3 main bearing cap stud. Lower the pickup tube and screen into the oil pan.
  4. Remove the oil pan from the vehicle.

To install:
  1. Clean the oil pan, inlet tube and gasket surfaces. Inspect the gasket sealing surface for damages and distortion due to overtightening of the bolts. Repair and straighten as required.
  2. Position a new oil pan gasket and seal to the cylinder block.
  3. Position the oil pick-up tube and screen to the oil pump and install the lower attaching bolt and gasket loosely. Install nut attaching to number 3 main bearing cap stud.
  4. Place the oil pan on the crossmember. Install the upper pick-up tube bolt. Tighten the pick-up tube bolts.
  5. Position the oil pan to the cylinder block and install the attaching bolts. Tighten to 10-12 ft. lbs. (13-16 Nm).
  6. Install the transmission crossmember.
  7. Raise the engine and remove the blocks under the engine supports. Bolt the engine to the supports.
  8. Install the exhaust system.
  9. If equipped with an automatic transmission, connect the oil cooler line at the left side of the radiator.
  10. Install the nuts and lockwashers attaching the engine support insulators to the chassis bracket.
  11. Install the upper intake manifold and throttle body (see Fuel System ).
  12. Install the fan shroud.
  13. Fill the crankcase.
  14. Fill and bleed the cooling system.




4_16_2012_2_42_20_pm.gif

Fig.: 5.0L and 5.8L engine oil pan gaskets and seals


1987 5.8L Engine With 4-Bbl. Carburetor

  1. Remove the oil dipstick (on pan entry models only).
  2. Remove the bolts attaching the fan shroud to the radiator and position the shroud over the fan.
  3. Remove the nuts and lockwashers attaching the engine support insulators to the chassis bracket.
  4. If equipped with an automatic transmission, disconnect the oil cooler line at the left side of the radiator.
  5. Raise the engine and place wood blocks under the engine supports.
  6. Drain the crankcase.


CAUTIONThe EPA warns that prolonged contact with used engine oil may cause a number of skin disorders, including cancer! You should make every effort to minimize your exposure to used engine oil. Protective gloves should be worn when changing the oil. Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used.
  1. Remove the oil pan attaching bolts and lower the oil pan onto the crossmember.
  2. Remove the two bolts attaching the oil pump pickup tube to the oil pump. Remove nut attaching oil pump pickup tube to the number 3 main bearing cap stud. Lower the pick-up tube and screen into the oil pan.
  3. Remove the oil pan from the vehicle.
  4. Clean oil pan, inlet tube and gasket surfaces. Inspect the gasket sealing surface for damages and distortion due to overtightening of the bolts. Repair and straighten as required.
  5. Position a new oil pan gasket and seal to the cylinder block.
  6. Position the oil pick-up tube and screen to the oil pump and install the lower attaching bolt and gasket loosely. Install nut attaching to number 3 main bearing cap stud.
  7. Place the oil pan on the crossmember. Install the upper pick-up tube bolt. Tighten the pick-up tube bolts.
  8. Position the oil pan to the cylinder block and install the attaching bolts. Tighten to 10-12 ft. lbs. (13-16 Nm).




Hope this helps, also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Apr 16, 2012 | Ford F-150 Cars & Trucks

1 Answer

Hyundie 1300 Accent Hatchback year of manufacture 2000. Is the transmission lubricated via the engine or is it separate and filled manually.


Hi,
Off course! The engine oil is different from tranny lubrication! Fill the engine oil via engine oil cap. If u have an automatic transmission, check the level of ATF by looking at the transmission dipstick. and fill it up via dipstick tube. If you have a manual tranny, check the gear oil via inlet nut under the transmission.
Hope that clears everything!

Jun 15, 2011 | Hyundai Accent Cars & Trucks

3 Answers

How do i put transmission fluid in my vw passat 52 plate manual diesel


down the dipstick hole--------short hose small funnel and pour it in ,but slowly

Feb 01, 2010 | 2003 Volkswagen Passat

2 Answers

How you take out the oil pan on 1990 ford bronco 4x4 302 5.0


Ford Pick-ups and Broncos 1987-1996 Repair Guide
Fuel Injected 5.0L and 5.8L Engines - Oil Pan
  1. Drain the cooling system.
CAUTION When draining the coolant, keep in mind that cats and dogs are attracted by ethylene glycol antifreeze and are quite likely to drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.
  1. Remove the bolts attaching the fan shroud to the radiator and position the shroud over the fan.
  2. Remove the upper intake manifold and throttle body (see ).
  3. Remove the nuts and lockwashers attaching the engine support insulators to the chassis bracket.
  4. If equipped with an automatic transmission, disconnect the oil cooler line at the left side of the radiator.
  5. Remove the exhaust system.
  6. Raise the engine and place wood blocks under the engine supports.
  7. Drain the crankcase.
CAUTION The EPA warns that prolonged contact with used engine oil may cause a number of skin disorders, including cancer! You should make every effort to minimize your exposure to used engine oil. Protective gloves should be worn when changing the oil. Wash your hands and any other exposed skin areas as soon as possible after exposure to used engine oil. Soap and water, or waterless hand cleaner should be used.
  1. Support the transmission with a floor jack and remove the transmission crossmember.
  2. Remove the oil pan attaching bolts and lower the oil pan onto the crossmember.
  3. Remove the two bolts attaching the oil pump pickup tube to the oil pump. Remove the nut attaching the oil pump pickup tube to the No. 3 main bearing cap stud. Lower the pickup tube and screen into the oil pan.
  4. Remove the oil pan from the vehicle.
To install:
  1. Clean the oil pan, inlet tube and gasket surfaces. Inspect the gasket sealing surface for damages and distortion due to overtightening of the bolts. Repair and straighten as required.
  2. Position a new oil pan gasket and seal to the cylinder block.
  3. Position the oil pick-up tube and screen to the oil pump and install the lower attaching bolt and gasket loosely. Install nut attaching to number 3 main bearing cap stud.
  4. Place the oil pan on the crossmember. Install the upper pick-up tube bolt. Tighten the pick-up tube bolts.
  5. Position the oil pan to the cylinder block and install the attaching bolts. Tighten to 10-12 ft. lbs. (13-16 Nm).
  6. Install the transmission crossmember.
  7. Raise the engine and remove the blocks under the engine supports. Bolt the engine to the supports.
  8. Install the exhaust system.
  9. If equipped with an automatic transmission, connect the oil cooler line at the left side of the radiator.
  10. Install the nuts and lockwashers attaching the engine support insulators to the chassis bracket.
  11. Install the upper intake manifold and throttle body (see ).
  12. Install the fan shroud.
  13. Fill the crankcase.
  14. Fill and bleed the cooling system.

If you need see images about this theme, can visit autozone.com (free register).

Hope helped (remember rated this help) Good luck.

Dec 02, 2009 | 1990 Ford Bronco

1 Answer

Where the oil pump in a 75 ford maverick is located and how to replace it!


Removal & Installation
  1. Remove the oil pan.
  2. Remove the oil pump inlet tube and screen assembly.
  3. Remove the oil pump attaching bolts. Lower the oil pump, gasket, and intermediate driveshaft from the crankcase.
  4. To install, prime the oil pump by filling either the inlet or outlet port with engine oil. Rotate the pump shaft to distribute the oil within the pump body.

5d9bd39.gif
6-cylinder oil pump disassembled


0777aa6.gif
V8 oil pump disassembled

  1. Position the intermediate driveshaft into the distributor socket. With the shaft firmly seated in the socket, the stop on the shaft should contact the roof of the crankcase. Remove the shaft and position the stop as necessary.
  2. Insert the intermediate driveshaft into the oil pump. Using a new gasket, install the pump and shaft as an assembly. Do not attempt to force the pump into position if it will not seat readily. If necessary, rotate the intermediate driveshaft hex into a new position so that it will mesh with the distributor shaft.
  3. Torque the oil pump attaching bolts to 10–15 ft. lbs. on the 6-cylinder engines, and 22–32 ft. lbs. on the 302 V8.
  4. Clean and install the inlet tube and screen assembly.
  5. Install the oil pan

Nov 19, 2009 | 1978 Ford Granada

1 Answer

I have a leak from the oil pan ...of my 1992 mercury topaz and im needing to know what all i will need to do to repair it


You didn't list your engine size so please pick the approriate task:

2.0L Engine
  1. Disconnect the negative battery cable.
  2. Raise the vehicle and support safely with jackstands.
  3. Drain the crankcase of oil.
  4. Remove the attaching bolts securing the oil pan to the engine.
  5. Clean the oil and gasket mating surface completely, and allow to dry.
To install:
  1. Apply a 1/8 in. (3.18mm) bead of silicone sealer D6AZ-19562-B or equivalent between the oil pan and engine crankcase.
  2. Install the oil pan using the attaching bolts. Torque bolt to 5-7 ft. lbs. (7-10 Nm).
  3. Lower vehicle, and fill crankcase with correct amount of engine oil.
  4. Start engine and check for leaks.

2.3L Engine
  1. Disconnect the negative battery cable.
  2. Raise the vehicle and support safely with jackstands.
  3. Drain the crankcase of oil, and drain the cooling system by removing the lower radiator hose.
When draining coolant, keep in mind that cats and dogs are attracted to ethylene glycol antifreeze, and could drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.
  1. Remove the roll restrictor if equipped with a manual transaxle.
  2. Disconnect the starter cable.
  3. Remove the starter from the vehicle
  4. Unfasten the bolts securing the rear oil pan to the transaxle case.
  5. If equipped with a manual transaxle, remove the secondary air injection tube at the check valve.
  6. Remove the heater supply tube located at the lower water pump inlet tube assembly.
  7. Loosen the bolts and remove the brackets at the block and water pump inlet tube and A/C compressor line at the pan.
  8. Using a prybar between the engine and body of car, flex engine enough the remove oil pan.
  9. Clean the oil and gasket mating surface completely, and allow to dry.
  10. Clean both mating surfaces of oil pan and cylinder block making certain all traces of RTV sealant are removed. Ensure that the block rails, front cover and rear cover retainer are also clean.
  11. Remove and clean oil pump pick-up tube and screen assembly. After cleaning, install tube and screen assembly.
To install:
  1. Apply a bead of RTV E8AZ-19562-A sealer or equivalent, in the oil pan groove. Completely fill oil pan groove with sealer. Sealer bead should be 0.200 in. (5mm) wide and 0.080-0.150 in. (2.0-3.8mm) high (above oil pan surface) in all areas except the half-rounds. The half-rounds should have a bead 0.200 in. (5mm) wide and 0.150-0.200 in. (3.8-5.1mm) high, above the oil pan surface.
Applying RTV in excess of the specified amount will not improve the sealing of the oil pan, and could cause the oil pickup screen to become clogged with sealer. Use ad equate ventilation when applying sealer.
  1. Install oil pan to cylinder block within 5 minutes to prevent skinning over. RTV needs to cure completely before coming in contact with any engine oil. Ideally, about 1 hour at ambient temperature between 65-75°F (18-24°C) is recommended as a drying time.
  2. Install oil pan bolts lightly until the 2 oil pan-to-transmission bolts can be installed.
  3. Install 2 oil pan-to-transaxle bolts. Tighten to 30-39 ft. lbs. (40-54 Nm) to align oil pan with transaxle. Loosen bolts 1/2 turn.
  4. Tighten all oil pan flange bolts to 15-22 ft. lbs. (20-30 Nm).
  5. Tighten 2 oil pan-to-transmission bolts to 30-39 ft. lbs. (40-54 Nm).
  6. Install brackets for A/C compressor line and water pump inlet tube.
  7. If equipped with a manual transaxle, fasten the air injection tube.
  8. Install the starter and cable.
  9. Lower vehicle.
  10. Install engine oil and coolant.
  11. Connect the negative battery cable.
  12. Start engine and check for coolant and oil leaks.

Oct 12, 2009 | 1992 Mercury Topaz

2 Answers

How to flush the tranny with no dip stick


Unless it's a manual trans every transmission has a dipstick for checking fuid levels, a manual trans has a hex head plug for checking the gear oil level...

Oct 03, 2009 | 1999 Volkswagen Jetta

Not finding what you are looking for?
1999 Dodge Durango Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...