Question about 1997 Jeep Grand Cherokee

1 Answer

Turning over but no fire and no fuel pump - 1997 Jeep Grand Cherokee

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Jeep Master
  • 1,455 Answers

If the check engine light does not light up, on the dash, when you turn on the ignition, then the ecu is almost certainly in need of repair. A bad ecu will not allow power to the fuel pump or coil. Repair service for the ecu or a replacement is usually available on ebay.

Posted on Jul 17, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What turns on fuel pump and injection . I have power new pump new computer will fire on starting fluid


Hi Bill:
- If it fires on starter fluid you have spark.
- The fuel pump is turned on when you turn on the key. Check for fuel pressure.
- The injectors are triggered by the cps.
I'd suggest that you have codes checked as next step.

Oct 19, 2015 | Cars & Trucks

1 Answer

No fire 2 fuel pump on 2002 suburban


Have you checked the fuel pump relay yet ?
It should have power for three seconds when you turn the key switch on, then power after the engine starts.

Jan 22, 2013 | 2002 Chevrolet Suburban

1 Answer

1996 Toyota Windom no fuel no fire


dose the fuel pump come on when you turn the key on listen for the fuel pump to come on

Jun 12, 2012 | Cars & Trucks

1 Answer

Turns over and won't start, replaced fuel filter and just turns over and almost fires


Almost fires? Do you mean it does fire some, that you know the plugs are getting spark? If so, then you probably need to have your fuel pressure tested to see if pump is working properly. Can you hear the pump buzz on briefly when you turn key to on? It should come on for a couple of seconds to pressurize the lines. If you don't hear it, then your pump may be bad, or something not turning pump on. Good luck.

Nov 09, 2011 | 1995 Buick Regal

1 Answer

The dash gauges all work , fuel pumps are both good , the fuel pumps wont come on and the truck trys to fire when i turn the ignition on but wont , could this be a fuel regulator


did you check the fuel pressure pump on the frame rail for power and ground? have you verified no ignition spark to the spark plugs? have you checked for fire from the coil to the distributor cap? does the check engine light come on when you turn the key on? have you check for injector pulse and power at the fuel injectors? if the fuel pump won't come on and you have no ignition fire and no injector pulse, all of these systems are triggered by the ECM.

Aug 12, 2011 | 1990 Ford F150

1 Answer

Turns over but will not fire. fuel pump was


check the rotor bug also make sure you have fire coming out the coil

Jan 17, 2010 | 1994 GMC Sierra

1 Answer

Turns over, doesn't fire. No gradual problem, just didn't start this morning. No fuel to fuel filter, wondered where the fuel pump relay is, is there a fuel pump fuse, and where is the ground wire f


Yes it has a fuel pump relay. It's located somewhere in your Main Fuse box.It can be found under the hood near the Fiewall or the front end of the vehicle.

May 31, 2009 | 2002 Chevrolet Blazer

1 Answer

Doesn't get fire since replacing fuel pump.


Normally after replacement of the fuel pump you need to get the fuel flowing back through the system again. To do this, turn the ignition key until you hear the fuel pump kick in for a few seconds, then turn key back to off. Repeat this several times to get the fuel flowing. If this doesn't help, you will need to ensure that the fuel pump is actually coming on. Let me know

May 24, 2009 | 1995 Dodge Ram

1 Answer

1994 GMC Sierra 4X4 - turns over no fire


Checked volyage at relay then grey wire at pump harness. Found the fuel pump was faulty.

Jul 19, 2008 | 1995 GMC Suburban

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...