Question about Ford Cars & Trucks

Open Question

04 focus,dash abs light not illuminating,when turning ignition on,

When switching my ignition on,various light illuminate on the speedo head,with exception to the abs light,which it has failed the mot on,checked and the bulb in place is working when swopped with indicator light,

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
chiquititas
  • 1010 Answers

SOURCE: turn signals

The unit that supplies power to the indicators and gives you the ticking noise is refered to as teh flasher can. It is virtually just a relay that continually switches power.

My suggestion would be to check this, sorry I dont know where it is located on your car.

Part is relatively cheap if it needs replacing.

Hope I have helped.

Posted on Jun 25, 2008

Ad
kdg0662
  • 1 Answer

SOURCE: brake and dash lights no working

Had a similar problem and fixed it by installing a new headlight switch / turn signal lever. Hope this helps.

Posted on Apr 11, 2009

  • 82 Answers

SOURCE: 1995 Pathfinder - No dash illumination lights or running lights

manual ... fuse ... relay ... switch ...

Posted on May 08, 2009

  • 10 Answers

SOURCE: Speedo and Tacho illumination in my ford focus turnier dont work

you have to remove the instrument cluster/part of dash to reach them

Posted on Oct 06, 2009

  • 1 Answer

SOURCE: Tail bulbs illuminated on dash panel and glow plug light is on

where are the fuse box located exactly?

Posted on Feb 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan pathfinder 2003 no odometer light and dash board and tap light disappers when turn on head lights


is there a rheostat switch that dims the dash illumination ,these are usually a wheel type switch , other than that have a check of the fuse for the dash illumination hope this helps

May 25, 2014 | Nissan Pathfinder Cars & Trucks

1 Answer

07 Honda CR-V, Dash lights out, speedo inop, warning lights staying on, car runs and drives with no other problems.


hi i would take a look at the inside fuse panel in case a multiplexer box is clipped on the back of int fuse panel u r cluster is missing power or ground in u honda manual under fuses it should give u description of function and a fuse number should point u in the right direction danny

Mar 21, 2014 | 2007 Honda CR-V

1 Answer

I have a 1983 oldsmobile 98 and the dashboard lights wont turn off how can I turn them off so my battery wont die


Is it the illumination lights? If so, that sounds like a bad headlight switch-when you put the park lights on (first click), it turns on the dash illumination lights.
If it is warning lights or other lights on the dash, it could be a bad ignition switch.

Apr 30, 2012 | 1983 Oldsmobile Ninety Eight

2 Answers

Dome lights will not turn off in Lincoln MKZ


CHECK THE ILLUMINATION SWITCH ON HEAD LIGHT THAT CONTROL DASH CONTROL BRIGHTNESS IF ILLUMINATION SWITCH TURN FULLY ON. INTERIOR DOME LIGHT WILL STAY ON.IF YOU HAVE BAD DOOR AJAR SWITCH DOME LIGHT WILL STAY ON.

Sep 10, 2011 | 2008 Lincoln MKX

1 Answer

Fuses panel described in English


Hope this helps your out. I know the diagram and locator is a bit blurry but hopefully it gets what you need.
Drivers kick panel:
Front wiper 20A - Front wiper system Cigar 15A- Cigarette lighter Audio 10A- Audio, remote control mirror Air Bag 10A -Air bag diagnostics Stop lights- 15A -Rear brake light, high mounted stop light ECU B+ 10A - Shift lock actuator, transaxle controle module, radio, engine control module Room 10A - Interior light, clock, ignition key reminder, rear cargo area light switch ABS 10A- Anti lock brake system control unit ECU IG1 10A - Transaxle control module, shift lock actuator, ABS control unit, DRL unit Meter 10A - Instrument panel, back-up switch, electronics time control module, inhibit switch Turn signal 10A- Hazard switch ,front and rear turn lights, turn indicator IGN1 20A - Ignition switch ABS 30A- ABS pump motor TNS 30A- Tail light, license plate light COOL/FAN 30A- Cooling fan Cond/Fan 20A- A/C condenser fan Starter 15A- Start signal , Fuel pump Blower 25A- Blower Motor SR/ACC 10A - Ignition switch Hazard 15A - Hazard and turn signal light D/Lock 25A- Door locks ABS 30A - Anti lock brake system control P/W RH 20A- Power window motor right hand P/W LH 20A- Power window motor left hand IGN2 25A- Ignition Switch
Engine compartment :
Head 25A- headlights IG 2 30A- Ignition switch IG coil 15A -Ignition coil, condenser,generator IC regulator, diagnostic connector. O2 down 10A- Rear O2 sensor O2 up 10A- Front O2 sensor Fuel pump 10A -Fuel pump unit Injector 10A -Fuel injector ,camshaft positioning sensor, purge solenoid valve, EVAP, IAC actuator, Mass Airflow sensor, EGR stepper motor. fuel pump relay coil, vehicle speed sensor. A/Con 10A - A/C compressor controls, cooling fan BTN 30A- Brake light , high mounted stop light. Tail light LH 10A- License plate light, tail light , rear combo light, instrument panel illumination Tail light RH 10A-License plate light, tail light , rear combo light, instrument panel illumination Head low 15A- Headlight Head Hi 15A-Headlight Horn 15A- Horn jlmacman.png jlmacman_0.png

Inside kick panel jlmacman_1.png

Mar 07, 2011 | 1995 Kia Sephia

2 Answers

How do i turn of the timing belt light on my 04 landcruiser 3 litre


Ive never heard of a timing belt light, but there is a maintenance light that can be reset. Here the procedure:

To reset the maintenance reminder light: Turn the ignition switch to the "ON" position. Set the odometer/trip display to the odometer (ODO) mode. Turn the ignition switch off. Depress and hold the trip meter reset button while turning the ignition switch to the on position. The maintenance reminder light will, illuminate for 3 seconds, blink for 2 seconds, illuminate solid for 1 second and then turn off. Release the trip meter reset button. Turn the ignition switch to the off position. Turn the ignition switch to the on position. Confirm that the maintenance light goes out.
Let me know if this helped you out!

Mar 29, 2010 | 2004 Toyota Land Cruiser

2 Answers

Anti lock brakes


depending on the system if it is 2 channel or 4 channel one of the sensors that are located on the backing plate located behind calipers is eithier faulty or dirty you can try brake cleaner these sensors use a small magnet pickup device to sense when the wheel "locks up"

Jul 20, 2008 | 1985 Audi 5000 S

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...