Question about Volvo Cars & Trucks
Windshield wipers suddenly stopped working. I checked the fuse which was obviously blown. Replaced with a new 25 amp......however it still does not work. Any ideas other than a new ww motor!
You need wiring diagrams in order to proceed
You need to see what is in that system on paper,
so you have a starting point to do your testing.
Once the entire system is found to be good, the
motor may be the problem & you may find you
won't be able to test it, even with a schematic, as
some have circuits inside.
You may only find the motor at a dealer in some cases
Posted on Jul 09, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1997 Suburban windshield wipers
Don't need the book on the truck. For starters, go to your local dealer parts department and they can print out the label of the fuse panel for your truck. The fuse in question will be wipers. The most likely cause of your problem isn't your wipers but the swicth itself. Depending on whether or not you have cruise control, you can buy one for less at an aftermarket cruise control company. Once you get it, we can go live chat to tell how to change it out cause it's trick but all you need is string and tape. Before you buy the new one, unplug yours at the bottom of the steering column and plug the new one in to see if it works. If you found this helpful please post as such. I f you go to the shop, please post this as fixya. TY
Posted on Jan 16, 2009
SOURCE: Rear Windshield Wiper Problems
Check the wiper motor connection if its touching anything and loose it will automatically ground out and check at connection make sure you put some gel and then snap it in/ Please rate my response thank you very much
Posted on Jan 31, 2009
May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.
Posted on Feb 05, 2010
Hello, I would say that is exactly what has happened. If you can move the wipers with no resistance it's likely one of the bolts has come loose. Both wiper arms are linked to one wiper motor.
Posted on Mar 07, 2010
Tips for a great answer:
Nov 27, 2012 | Oldsmobile Intrigue Cars & Trucks
Jan 28, 2011 | 2005 Scion xA
Jan 16, 2011 | 2004 Chevrolet Tahoe
Jan 05, 2011 | 1999 Mercury Mystique
Jan 03, 2011 | 1992 Honda Accord
Dec 25, 2010 | 2006 Renault R5
Dec 10, 2010 | Nissan Altima Cars & Trucks
Nov 09, 2010 | Chevrolet Colorado Cars & Trucks
Jun 07, 2010 | 1998 Saturn SL
Jul 11, 2009 | 2002 Isuzu Axiom
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: