I have a 96 Chevy 4x4 with a pushbutton 4x4. I parked it one day left in 4x4. The next morning, I have no indicator lights on the buttons at all. And I can not shift it out of 4HI back into 2HI. I've checked the fuses and they are fine.Driving today (still in 4HI)the 4LO light started flickering, then stayed on, and then off again and so on.I know it is not in 4LO.
Replace the selector switch assembly. Common failures.
So I have the same problem but my does shift but I can only be neutral. I know for 4lo I have to be in neutral but 4hi doesn't. I've replaced the selector switch and front diff actuator. Pretty the same lights are flashing and holding also
Same make ,model an year vehicle ?
Did you try hooking up a scan tool an checking for codes in the 4X4 control module ? Transfercase actuator problem . Test electrical circuits with a volt meter ?
×
760 views
Usually answered in minutes!
×