Have a new radiator, just need to know what to take out, and how, and put the new radiator back in
This can be very labor intensive, as it was in my 94 grand cherokee. You'll need to remove the serpentine belt, fan and fan shroud, as well as the front grill and that metal plate that the hood latches into. Drain the radiator (save the fluid). Disconnect all hoses and lines. Remove the old one, and insert the new one. You'll likely have to pull back on the A/C condensor (located in front of the radiator) to get it in. The radiator is held in place by two plastic pegs at the bottom. DO NOT BREAK THESE! It will ruin your day. Assemble the hoses and lines back on, and re-install the components identified above. Since it's a 95, expect to deal with some stuck bolts. I reccomend using PB blaster to free these up. It'll make life a lot easier for you.
139 views
Usually answered in minutes!
have u tried to do this job yet? it is about as easy as they get.
×