I have a 2000 chevy suburban and the drivers window quit working. I replaced the motor and regulator and it still does not work then I replace the powerwindow master switch and it still does not work. every thing else on this switch works fine but the drivers side power window
Hi there,
Try replacing the button that you push up and down. It could be bad under it and not making the connection. Maybe take the panel off and take the switch off, then clean the connecters under the button. Maybe that will do it. Also, you probably already ckeched this, but is the window off track? Well, good luck and let me know. Have a great night.~MWD
i have a 2000 chevy suburban that died out because it ran out of gas. i put half a tank of gas in it...
(More)
i have a 2000 chevy suburban that died out because it ran out of gas. i put half a tank of gas in it and tried to start it back up but no luck. the fuel gauge doesnt even register that is has any gas in it. do i need to fill my tank up just to get it started again or is that a sign my fuel pumps gone?
my rear cargo hatch won't open, sounds like the latch is unlocking but i need to take the panel off...
(More)
MY REAR CARGO HATCH WON'T OPEN, SOUNDS LIKE THE LATCH IS UNLOCKING BUT I NEED TO TAKE THE PANEL OFF INSIDE HOW DO I DO THAT
chevy surburban tailgate switch indicating tailgate is open when it is in fact closed. Intermitant...
(More)
chevy surburban tailgate switch indicating tailgate is open when it is in fact closed. Intermitant problem, seems to happen when in the direct sun light (heat). In the shade or cool temperatures this does not happen.