At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did the old belt break? If so, check to see if the valves are bent. If this isn't the issue, 1 tooth off will keep it from starting, the cam marks have to be aligned with the alignment marks on the head.
my honda civic ex 1996 the cruise controle have a trouble when i push (on) the switch on the dash the green light stay off i dont have a cruise controle i need help Thank
What sensor are you try to look for?
here is the list of all the sensors for 97 honda civic EX
1.Countershaft Speed sensor
Driven Pulley speed sensor
Engine Coolant Temperature Sensor
Front wheel sensor
Fuel Tank Pressure Sensor
Intake Air Temperature Sensor
Knock Sensor
Mainshaft speed sensor
Manifold Absolute pressure (Map) sensor
Primary Heated Oxygen sensor
Rear Wheel sensor
Secondary Gear shaft speed sensor
Throttle Position sensor
Vehicle speed sensor.
I hope this can help you, please put something on the ratting. good luck.
You can determine where your car was made by examining the VIN
Example Description
Vin #
------- --------------------------------
J ╗
H ] - JHM = Honda Motor Co. passenger car
M ╝
E ╗ EG1 = D15B7 (93-95 S)
G ] - Engine: EG2 = B16A2 (96-97 VTEC), B16A3 (94-95 VTEC)
2 ╝ EH6 = D16Y7 (96-97 S), D16Y8 (96-97 Si), D16Z6 (93-95 Si)
1 ] - Body/Transmission: 1 = 2-door manual 5-speed 2 = 2-door automatic
6 ] - Vehicle Series: 4 = S 6 = Si 7 or 9 = Si with ABS, or VTEC
? ] - math check digit
R ] - Model Year: P = 1993, R = 1994, S = 1995, T = 1996, V = 1997
S ] - Assembly Plant: C = Sayama, S = Suzuka, T = Tochigi
0 ╗
0 ║
5 ] - Serial number, based on the sequence off the
7 ║ production line
9 ║
3 ╝
Did you make sure that the tork converter was all the way forward first if not then you will need to take the transmission back out and make sure that the converter has either automatic trany fluid in it or 184/85 gear oil depending on whether or not you have automatic trasmission or manual fill it up until you can put your finger in it and then rotate converter clock wise and it should slip into place before putting trasmission back into car and if after doing that and you still are having trouble take it to a transmission shop to have them do it for you.
×