At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To check the spark plug wires on your 1992 Pontiac Grand Prix 3.3L V6, you can follow these steps:
Locate the spark plug wires on the engine. They are usually connected to the spark plugs on the top of the engine and the ignition coil on the side of the engine.
Inspect the wires for any visible damage, such as cracks or cuts. Also, check the connections at the spark plugs and the ignition coil for any signs of corrosion or looseness.
Use a spark plug wire tester to check the wires for proper resistance. You can purchase a tester at an auto parts store. Follow the instructions provided with the tester to check each wire.
If a wire fails the resistance test, replace it with a new wire. Be sure to replace each wire one at a time to avoid mixing up the order.
After replacing the wires, try starting the engine again to see if the problem has been resolved.
If the problem persists after checking and replacing the spark plug wires, there may be other issues causing the engine to not start, such as a faulty ignition coil or fuel system components. In that case, it may be necessary to take the vehicle to a mechanic for further diagnosis and repair.
There is a tool you can get on the internet or from
a tool supplier, to replace the front engine strut/
support, whatever it's called,you can look that up,&
it pulls the engine to the front,so you can sort of
get to the back plugs
no. remove the plastic cover fom the top of the engine.pulling upward on it after removeing the scews will pull the plug wire insulators up with it all as one piece.
×