Question about 2006 Chrysler Town & Country
The rear air conditioning in my 2006 Chrysler Town & Country works fine, but only blows from the floor vents and not from the overhead vents. Could it be a problem with the switch?
Yes, switch for the vents are switched towards floor. remove compartment box so you can easily see switch cable
Posted on Jun 11, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: front vents will not work
If they are stuck on defrost,then the problem is a little vaccum line that comes through the firewall as all the climate controls are vaccum controlled,so look for a small green or black plastic line unhooked.
Posted on Dec 25, 2008
I would be looking at a shorted blower resistor it is located behind the glove box on the HVAC housing. Prob the switch contacts with a 12 volt test light if the bulb intesity does not change the blower resistor is bad. The resister is at fault about 99% of the time.
Posted on Aug 29, 2009
Caliper mounting bracket bolts 125 ft, Caliper guide pins/bolts 26 ft, Brake hose to caliper 35 ft. Wheel lug nuts 100 ft. Wheel speed sensor 115in lbs*** This is for disc rear brakes Teves system. You do know that the rear disc is a Rotor/Drum. The parking brake shoes ride on the inside.
Posted on Jan 23, 2010
Tips for a great answer:
Jan 27, 2011 | 2006 Chrysler Town & Country
Aug 25, 2009 | 2005 Chrysler Town & Country
Jul 30, 2009 | 2008 Chrysler Town & Country
Jun 25, 2009 | 2007 Chrysler Town & Country LX New Cars
Jun 25, 2009 | 2006 Chrysler Town & Country
Apr 21, 2009 | 2007 Chrysler Town & Country LX New Cars
Apr 20, 2009 | 2004 Chrysler Town & Country
Mar 12, 2009 | 2006 Chrysler Town & Country
280 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: