My Saab was stalling while I was coming to a stop and then would not start again. I changed the spark plugs and PCV, and it seemed to be fine after that. Now its beginning to stall while I'm driving. Any suggestions?
I would suspect the crankshaft position sensor is starting to fail. Sometimes the hose from the intercooler to the throttle body gets a hole in it where it passes by the exhaust. If it's neither of those two things someone should put a fuel pressure gauge on the car and monitor fuel pressure when the stalling issue occurs.
Ck the Direct Ignition module preferrably when its not starting. Always use NGK spark plugs no substitutions! You will need another IGN. module to troubleshoot
Check the throttle body, they fail sometimes and its hard to determine the problem without bringing it to a saab specialist they hook up the ob2 machine and read the codes the the car is sending out..., I beleive Elite foreign auto parts as the part.. tested and used they are located in Los angeles
I can't figure out the proper way to re-install the alternator brackets and bushings on my 89 turbo...
(More)
I can't figure out the proper way to re-install the alternator brackets and bushings on my 89 turbo convertible.The bracket which bolts to the engine with allen bolts is extremely tight and we have not been able to loosen it. Any pics or schematics available? Thanks. Jim
1999 Saab 9-3 i need to know how to test the fuel pump connector for power when the key is turned...
(More)
1999 Saab 9-3 i need to know how to test the fuel pump connector for power when the key is turned on. 4 pin connector at the pump with white, green, black and yellow wires.
Describe how to mount fog light on 2001 Saab SE. It is attached at the base but the top of the light...
(More)
Describe how to mount fog light on 2001 Saab SE. It is attached at the base but the top of the light is pulled away from the bumper