- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the actuator motor on the heater it directs the air into the vents. There is probably two of them be sure to check both. The motor makes the vents move and again directs the air where you want. Hope this helps.
This is either an out of phase issue or a temperature control blend door or blend door motor actuator problem, it can also be the climate control module in the dash, 1st try disconnecting the battery for 5 min's to re-sync the climate control module, if this fails u will need to find out what blend door is the problem or if they are ok replace the automatic climate control module in the dash
you cant adjust it ,this requires the dealers computer to re set it,or a phyiscal control has packed up like a vacumn pipe has split where it pushes onto the valve that controls the flap in the heater unit.
u will need to repair the passenger side air temp control blend door, either the door is stuck or the small electric actuator that moves it is defective.
the main issue with this is either the thermostat or the climate control switch I do not know if your climate control switch is electronic or manual either way I would start out with the cheapest and go with the thermostat first good luck!
sounds like the drivers temp door actuator is not working should be located on the drivers side of the air box down by the gas pedal or center dash area
cold air out of drivers side and hot air out of the passenger side
×