SOURCE: 406 hdi pass door lock wont lock so car wont lock
Remove the door pannel and spray releasing oil over the central locking solinoid.That should sort it for you good luck.
SOURCE: how to bleed a hydraulic clutch on a peugeot 406
you need to buy a vacuum clutch bleeding tool make by a company called MITYVAC
SOURCE: what is the antipullution fault on peugeot 406?
If you drive your car more likely for short distances then the regenerating process couldn't be started to clean the cloged particulate filter and finally your car's ecu show you a antipollution fault. Drive your car to a motorway or dual carriage way.
The temperature meter should be showing above 70°C when you begin with this process. If this is the case, slow down place 3rd gear and drive at 3000-3500 rev /min to let the ecu to kick the regeneration process. Keep driving car 15 minutes in this state will be enough to solve this problem.
SOURCE: Peugeot 406 heater fan not working what do i do to fix it
if u remove the under cover in the passenger foot well, just turn the fan blower on full and hit the first thing you see when u look under the pass foot well with the palm of your hand and the blower should start to work.
192 views
Usually answered in minutes!
×