i got no spark on a 97 saturn sc 2 i replaced everything from crank position sensor to the pcm and...
(More)
i got no spark on a 97 saturn sc 2 i replaced everything from crank position sensor to the pcm and still no spark but there is power to everything
how do i put a single head 96 saturn back in timing the idelear pully came off and now it seem like...
(More)
how do i put a single head 96 saturn back in timing the idelear pully came off and now it seem like it is 180 out of timing
4 Door - 4 cylinder Automatic Trans - replaced a damaged ignition switch (screwdriver broke in...
(More)
4 Door - 4 cylinder Automatic Trans - replaced a damaged ignition switch (screwdriver broke in ignition and drilled out - lost only key, stranded and tried to start car using screwdriver) Black box below ignition switch is not holding properly - accidentally bent clip that holds box onto steering column when replacing it. After replacing switch, car will start but now shifter is stuck in park and will not move. Turn signals are not working either and only one side (passenger) of the emergency lights work. Replaced ignition with a SC1 switch but I am not sure if it was correct and can't find what model this is on the Title. Registration only says Class AC.
exact same thing happened to my son, was trying to install new remote and jumped the 4th and 8th pin...
(More)
exact same thing happened to my son, was trying to install new remote and jumped the 4th and 8th pin with paper clip. the locks wont work and the dome light wont work now, also they tried to diagnose problem by hooking up a computer and that wont work.